I have the latest BIOS file for my mainboard modded but UEFITool showed the message:

parseFile: invalid data checksum 5Ah, should be AAh
Unicode text "NvmExpressDxE" found in User interface section at offset 0h

Is that ok?
Can you please check my BIOS-file?

@Fernando
Thanks for your support. I will today evening try to flash and make from result a screenshot.

What shall i say ? "fantastic"

I will you donate :-))

Hy everyone,
I'm new to the forum and I'm trying to modify the bios of my MB (Asus Maximus VI Extreme - z87) following Fernando's instructions, but I have a problem and I can not solve it: when I try to decompress the file NvmExpressDxe_4 .rar tells me that it is not in the correct format or damaged. At this point I can not do anything anymore. I tried in every way to get that file but nothing to do. Now I'm stuck with my beautiful 512 GB WD Black PCIe for dust.
Would anyone be kind enough to post a link with the good file?

Sorry for my english ..... google translator

Thank you

Hi folks.

New here, first post and already asking for support:
I own 2 Asrock 990fx boards
- 990FX fatality killer
- 990FX extreme3

Following the procedures described I extracted 4 DXE modules from the fatality ROM and inserted them into the extreme3 ROM.
The extreme3 board boots with this ROM, but only to tell me my s..ty graphics card does not support GOP :-(
Is somebody out there willing to check if it works with a GOP graphics card?



990FX bios with possible NVME support

Just to give heads up: Asus P9X79 PRO working fine using "NvmExpressDxe_4" module mod with Samsung 970 EVO 250GB:



Latest Samsung firmware, drivers and Magician software also installed.

Hi,

Also new to the forum and having problems with my BIOS detecting my new 970 EVO 1TB.

I'm using this with a X99 Fatality Gaming i7 with a 6850k so both slots for M.2 should be usable, but I dont intend on using the drive as a boot drive, just storage. However I cant get the bios to detect it for storage, (Shows up as a selectable drive under the boot drive selection in BIOS though). I have the proper drivers installed, firmware, and SSATA slots are both open (the manual said that these were the ones that would be used by the M.2s).

Will editing the BIOS like you stated allow for my board to detect the drives for just storage, or is it only for use as a boot drive?

There might be something I'm missing so sorry in advance if thats the case, I'm pretty new to this.


Thanks

After 12 hours of trying different things and finally posting on here, it decided to work. Information on here is really useful if I want to use one as a boot drive in the future though so thanks anyways!

Hi Dieter

Thanks for your reply.
I thought CSM must be set to disable 😮
The mobo hieß back to enable complaining the Graphics Card doesnt support GOP.

I thought this disables nvme boot

Forget this one