Hi Fernando, I was wondering if you can help me...
I found that the ASUS MAXIMUS IV EXTREME and ASUS TUF SABERTOOTH P67 doesn't have any 'Volume Free Space' like other UEFI's from ASUS.
I can insert the NVMe module after last 'DXE driver' but it this cases the last 'PEI module' will be Rebuilded - is it ok?


ASUS MAXIMUS IV EXTREME BIOS: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1...e-ASUS-3604.zip
ASUS TUF SABERTOOTH P67: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1...7-ASUS-3602.zip

P.S.
I've already modified all existing UEFI's from ASUS (over 60) - I will share it soon! :D



EDIT by Fernando: Pictures resized to save space (can be enlarged by clicking onto them)

I was able to upload the bios mod :)

How do I set the boot options on my motherboard?

I mean two positions:

Well the first picture has no relevant to nvme at all, second you should try UEFI first, because nvme uses eufi mod for all. When your PC boots, press F12 or F8 depending on your bios to get to the boot menu, you should see the nvme drive there (only if you installed windows on it). If you don't have windows on the drive, you have to install Windows 10 using eufi-boot. (install windows in GPT mode, search on google if you dont know how to do it)

I changed Legacy ROM in Bios with EFI Compatible ROM , now when i turn on my computer I see a black screen screen ://// PC does not start. The motherboard spends short squeaks.

Why ? I have GTX1070 (Does this card not support GOP - Graphics Output Protocol UEFI >???????)

Reset your cmos. The EFI Compatible Rom option is broken on those old Asus motherboards. Set it back to Legacy.

Also you won't see your drive listed in the boot option menu. Only the 'Windows boot manager' boot entry if it
exists already will show. On my Z68 Asus board I cloned an existing Sata Windows installation onto
the NVME drive.

Worst case you may have to use bcdedit in a boot shell to create a boot entry if there isn't one.

Thank you. Will the replacement of the motherboard on P8z77V change anything in this regard?

Replacement?

asus P8Z68 Change on P8Z77 :) Sorry for my English

If I understand you correctly you say you have a P8Z77 and would that act like the P8Z68 in that regard? Maybe. Trial and error.

Hi Fernando, I have a MB msi z87 gd65 gaming, I try to insert the nvme module with UEFITool, but I do not know where it is going, I have looked at several examples of the forum, but this bios is completely different, I attach an image if you can help me.

Zitat von FirstEver im Beitrag #1982

---

I can insert the NVMe module after last 'DXE driver' but it this cases the last 'PEI module' will be Rebuilded - is it ok?

---

Zitat von e.v.o im Beitrag #1994

---

I think you are in the wrong section.

---