This modification allows you to successfully run the QTJ2 0000 processor on the ASUS Q170S1 motherboard

The modification was used based on the BIOS version v4210
BIOS modification was carried out in the CoffeTime 0.9.2 program

The firmware is done through the programmer
the firmware was carried out with the CH341A + sop8 programmer


- ME updated to version 1.8.77.3664 COR and disabled
- VBIOS updated to 1062 OPROM
- GOP updated to 9.0.1107 OPROM
The following patches have been applied:
- PCIe x16
- SKU hack
- Sync cores
- Init 8+ CPUs
- ACPI tables

The following fixes have been applied:

- PCIe 1440
- NVMe fix
- FD locks

Removed unnecessary microcodes

New microcodes:
906ED [BE]
906EC [BE]

Removed ASUS 12T Blockers



Before flashing the BIOS, you cannot turn off the CMOS battery, so the programmer will not be able to read information from the chip

What works:
-Everything works like on any processor

What does not work:
-intel ME.
-XMP profile not working
If you notice any problems, write, I will add them here

Since QTJ2 can consume at peak load from 120W and more, in the BIOS you need to limit the Power Limit to safe values for the VRM of the motherboard.
I recommend setting the Power Limit to 35v or 65w.
According to the motherboard specifications, it is possible to set the processor to 91W, but I do not recommend specifying such a value.

Now you can increase the memory frequency to 2933MHz