Hello,
I need a driver for IMEI under Windows 7 64 bits.
The motherboard is a Gigabyte H410M H
Processor Intel G5905 Comet lake LGA 1200
In the Device Manager rest only a yellow mark : PCI sinplified communications controller
Numéros d'identification du matériel
PCI\VEN_8086&DEV_A3BA&SUBSYS_1C3A1458&REV_00
PCI\VEN_8086&DEV_A3BA&SUBSYS_1C3A1458
PCI\VEN_8086&DEV_A3BA&CC_078000
PCI\VEN_8086&DEV_A3BA&CC_0780
ID compatibles
PCI\VEN_8086&DEV_A3BA&REV_00
PCI\VEN_8086&DEV_A3BA
PCI\VEN_8086&CC_078000
PCI\VEN_8086&CC_0780
PCI\VEN_8086
PCI\CC_078000
PCI\CC_0780

I've tried in manual
MEI Driver v2040.100.0.1029 (Windows 7)
but no driver is found by Windows.

Another driver found in
2040.100.0.1029 (01 oct. 2020)
for Windows Vista, 7, 8, 8.1, 10
give an error
Windows found a driver for your device, but encountered an error while trying to install it.
Code 39.

Regards.

Intel (Converged Security) Management Engine: Drivers, Firmware and Tools

MEI Drivers and Software v2044.15.0.1951 MSI (Windows 7, 8, 10 <= 1703)

MEI Driver v2040.100.0.1029 (Windows 7) (Driver only)

Thanks for your answer but I have already tested all these drivers. They are for Windows 10 and therefore will not work on Windows 7.
I found a solution for all the other problems that there was but for this last yellow mark I think I need to find a modified driver, if possible, working under Windows 7, hence my question.
I searched in
Intel (Converged Security) Management Engine: Drivers, Firmware and Tools
and so I tested
MEI Driver v2040.100.0.1029 (Windows 7)
but it doesn't work

I tested but it does not work nor with the installer "This platform is not supported." nor in manual "Windows did not find any driver for your device.", the ID DEV_A3BA is also missing from the .inf file.

@plutomaniac
Thanks for your answer.

I tested but it does not work nor with the installer "This platform is not supported." nor in manual "Windows did not find any driver for your device.", the ID DEV_A3BA is also missing from the .inf file.

I wanted to dump with
CSME System Tools v15.0 r5 - (2021-02-20)
but it was missing
api-ms-win-power-base-l1-1-0.dll
after implantation, error:
The application failed to start correctly (0xc000007b). Click OK to close the application.
Which CSME System Tools should I use?

@Scorpius
Just add in section [Intel.ntamd64.6.1]:

%TEE_DeviceDesc%=TEE_DDI_x64, PCI\VEN_8086&DEV_A3BA ;ME14.x - CML-V

@DeathBringer
Manual update OK, no more yellow mark.
Thank you very much this is what I was looking for.

@plutomaniac
I also think the MEI driver is not useful for me.
You showed me the possibility of removing the yellow mark in Device Manager by using a dummy entry from the .inf Intel Chipset INF Utility. Even if the ID is absent it must be possible to add it or create a special .inf to manage this ID in a dummy way.
For the rest of what you recommended to do a dump in efi, if I am not mistaken it would have been necessary then that I prepare a support formatted in gpt to welcome fpt.efi there, reactivate the efi in the bios and start on this support (indeed my configurations in Windows 7 are on MBR partitions and the EFI is disabled in the BIOS since I use Grub4DOS as launcher)?

Zitat von plutomaniac im Beitrag #9

---

Alright, Intel dropped support for Windows 7 at CSME 12 so there's nothing for CSME 14.5.

---

@plutomaniac
You are right now HWiNFO sends me information about Intel ME which was not the case before installing the driver.
The motherboard is brand new it is a PC that I have just assembled.
For the dump it's done but I do not see where we attach an attachment (maybe it's because I just signed up on the forum?)

@DeathBringer
What do you mean about "import section" ?