Zitat von Fernando im Beitrag #1387

---

Zitat von Lex im Beitrag #1386

---

Were there any important problems with ASMedia USB drivers in the past so now you decided to include also some older version "just in case"?

---

Yes, all the related information are within this thread. If you want to know more details, please use the "Search" box of this Forum.

---

Zitat von Lex im Beitrag #1396

---

I followed your advice and tracked back this thread. At this moment all I can say is: there is, indeed, quite a lot of problems with "newer drivers" from ASMedia. I will need more free time to read them all but I'll do it, for sure.
For anyone interested: here is the first post with ASMedia USB driver problems after change from v1.16.41.3 to a "newer one": USB 3.0/3.1 Drivers (original and modded) (49)

---

Zitat von x58haze im Beitrag #1397

---

Hello Lex, i was wondering how important is the Asmedia?

---

Zitat von Lex im Beitrag #1398

---

Zitat von x58haze im Beitrag #1397

---

Hello Lex, i was wondering how important is the Asmedia?

---

It depends on what ASMedia chipsets are on your mainboard and what devices are connected to them.
My mainboard's ASMedia chipsets are responsible for some of USB 3.0 and 3.1 ports.

---

Zitat von x58haze im Beitrag #1399

---

Oh, i see. My motherboard says that support Asmedia, but I really don't know which port are the Asmedia one.

---

@Lex Thanks buddy, and also thanks Fernando for posting useful information and drivers for most system! (y)

I can confirm that Windows 10 1709 don't longer work with the AMD ryzen 64 bit 3.0 nor the 3.1 and nor the normal 3.0
When trying to install the AMD 64 bit controller:


Hardware ID of the extensible 3.0


Driver version:


When trying to install the 3.1 AMD USB 3.1 drivers v1.0.3.0 WHQL or the version 3.1 v1.0.2.0 WHQL
on this device: it will says (installed) but Pc won't recognize usb ports.
Until i reboot the System.

Zitat von Fernando im Beitrag #1403

---

@x58haze:
Please try the manual installation of the AMD USB 3.0/3.1 drivers again, but this time you should use the "Let me pick..." > "Have Disk" option.
I bet, that you will get them installed this way.

---

Zitat von Fernando im Beitrag #1405

---

@x58haze:
Have you tried to install the USB 3.1 Hub driver manually after the reboot?

---

Also i had to connect a PS/2 keyboard to test while in windows without rebooting pc each time, to diagnose the problem
Right now i'm using the Rear panel USB ports 2.0 which are the only one in the rear, and Windows detected as 3.1 devices, so in Windows 7 that didn't happen and drivers works, i guess in Windows 10 1607 anniversary does work too, but on this 1709 build, seems to not work, so i'll keep trying and post some news

Thanks for your time Fernando.

Dear All,

First, thank you Fernando for your work.

I work with Asrock X99 Extreme6 work under Windows 7 x64 (details below)

Here my problem:
I can't read any USB2.0 devices (3 differents USB sticks and my phone Samsung GS3) on the different USB3.0 port except the rear USB3.0 port (n°13 in rear panel). All USB3 devices (microSD card reader, external HDD) work on all USB3 ports.
I tried all the drivers from Asrock website since 2 years now, from Intel drivers, and many drivers website and abandonned at the end. Everytime I have to connect a USB2 device I go under my desk, take my frontal lamp and plug it in the n°13 USB3 port

Recently, I buy a new phone, still USB2, and I try to plug it in my front panel (internal USB3.0 headers Intel) and of course it didnt work (as usual )

What I did:
-Uninstall all usb devices from my device manager (I use the keyboard only to reinstall from a "fresh" system)
-Install first pure 64bit Win7 Intel USB 3.0+3.1 Drivers v5.0.4.43 WHQL with DPInst option using DPInst as admin
-Restart
-Install pure ASMedia USB 3.0+3.1 Drivers v1.16.49.1 WHQL incl DPInst using DPInst as admin
-Restart

Finally I have an unknown device in my device manager (as usual...) and any of my USB2 device are read by any USB3 port except the rear one n°13.



When I plug a USB2 device in my rear panel (port n°1, USB2 port) it appears like this:



or if I plug in front panel it appears like:



And nothing happen if I plug it in port n°10 or 11

I am really stuck with this problem and can't find any solutions. I suspect Intel drivers, because these ports are Intel "controlled"

After full uninstall I also tried to install in this sequence:
-Install first pure ASMedia USB 3.0+3.1 Drivers v1.16.49.1 WHQL incl DPInst using DPInst as admin
-Restart
-Install pure 64bit Win7 Intel USB 3.0+3.1 Drivers v5.0.4.43 WHQL with DPInst option using DPInst as admin
-Restart
Same problem

I also try everything I can in the BIOS


Here my system:

My rear Panel


My internal USB3.0 headers


And which controller Intel or ASMedia for which USB port (found here: Intel X99 motherboard)


USB bios settings:


If one have THE idea to find the solution. Thank you very much for your help,

Jean

Something is wrong with the Intel usb 3.0/3.1 5.0.4.4 drivers. I intstall the WInRaid Ca certificate, goes without problem. Then I install Controller driver and get a prompt to reboot. I have to reboot, because usb 3.0 hub disapears after installing Controller driver. After reboot I get this message in driver window: "Windows cannot verify the digital signature for the drivers required for this device. ... Code 52". Hub driver is not signed by the way. Well this happends on my Asus G751jy laptop, but G752vy laptop installs the driver no problem. Both have secure boot enabled.