Forum - RE: USB 3.0/3.1 Drivers (original and modded)

#1321 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 2:25 pm

@Mithi:
Thanks for having answered my questions.
The performance of the USB connected devices depends not only on the USB Controller and the in-use USB driver, but on the quality and the data caching ability of the used USB devices themselves.
Have you already tested the speed of a high quality USB 3.0 Flash Drive, when it was connected to any of your USB 3.0/3.1 ports?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1322 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 4:02 pm (Last edited: Wed Nov 29, 2017 4:26 pm)

@Fernando:

Intel USB 3.0-3.1 Drivers v5.0.4.43 [MOD] works fine on Z77 (Win8.1, x64), same as v5.0.3.42.
So, I'm suggest it's NOT "only for Intel Chipsets from 8-Series up", but for the 7-Series also.

Thank you for your nice modding, as ever.

UPD:
------
I've found that "Controller Driver" (Intel(R) USB 3.0 eXtensible Host Controller) wasn't updated within DPInst64 and the version is still 5.0.3.42.
Manual installation wasn't applied also (the x64 driver was not found in the "Controller Driver" folder).

The "Hub Driver" and "Switch Driver" are OK, they were updated to v5.0.4.43.

It's strange... For now, within this configuration (5.0.3.42+5.0.4.43), USB 3.0 devices working as expected.

reply

#1323 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 4:28 pm

@iWARR:
Thanks for your feedback.
So I will continue to add the related HardwareIDs to the INF files of the future Intel USB 3.0 driver versions.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1324 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 4:33 pm

@iWARR:
Can you please re-check, whether the "Controller Driver" folder contains the 64bit driver v5.0.4.43 or not?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1325 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 4:42 pm (Last edited: Wed Nov 29, 2017 5:00 pm)

Name from the *.inf (v5.0.3.42): PCI\VEN_8086&DEV_1E31&REV_04
Full ID Name (Device Manager): PCI\VEN_8086&DEV_1E31&SUBSYS_84CA1043&REV_04

In some case my ID is not represented in the "iusb3xhc.inf".

I can try to fix *.inf file and reinstall, if I'm understand correctly.
UPD: Just adding my ID didn't worked... But the driver was found this time...

reply

#1326 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 5:00 pm

@iWARR:
Thanks for the quick reply.
Since the correct 64bit driver is within the "Controller Driver" folder of the packae named "pure 64bit Intel USB 3.0+3.1 Drivers v5.0.4.43 mod+signed by Fernando", you should be able to manually update the Controller driver (maybe you have to use the "Have Disk" method).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1327 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 5:07 pm (Last edited: Wed Nov 29, 2017 5:10 pm)

Zitat von Fernando im Beitrag #1326
@iWARR:
Thanks for the quick reply.
Since the correct 64bit driver is within the "Controller Driver" folder of the packae named "pure 64bit Intel USB 3.0+3.1 Drivers v5.0.4.43 mod+signed by Fernando", you should be able to manually update the Controller driver (maybe you have to use the "Have Disk" method).

Correctly. "Have Disk" method was used to check if my fix will work. But it doesn't, as I'm said in previous post.
The driver was found this time, but within the error in case of unsigned driver. (I have your cert insalled, of course).

reply

#1328 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 5:20 pm

@Fernando Thank You

I have problems only when I try to transfer large single files, the drives frequently disconnects & connects again.

reply

#1329 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 5:39 pm (Last edited: Wed Nov 29, 2017 5:41 pm)

@Fernando:

I have "Controller Driver" working. What I've done:

1) Fix "Controller Driver" *.inf file with my ID.
2) Reboot into Unsigned drivers install mode
3) Install "Controller Driver" manually

Note: other drivers from the pack - "Hub Driver" and "Switch Driver" - have absolutely no issues and have been insalled automatically within DPInst64.

So, you have to fix something in your pack, because the drivers working.

reply

#1330 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 5:59 pm (Last edited: Wed Nov 29, 2017 6:00 pm)

Zitat von Mithi im Beitrag #1328
I have problems only when I try to transfer large single files, the drives frequently disconnects & connects again.

Just tried to write and read 10Gb file on the 64Gb flash drive (Intel USB 3.0 port) - no issues. This is on your side, I think.

reply

#1331 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 6:48 pm

Zitat von iWARR im Beitrag #1325
Name from the *.inf (v5.0.3.42): PCI\VEN_8086&DEV_1E31&REV_04
Full ID Name (Device Manager): PCI\VEN_8086&DEV_1E31&SUBSYS_84CA1043&REV_04

That is interesting, because the original INF files of the Intel USB 3.0 Controller drivers (no matter which version), even those, which are natively designed for DEV_1E31 Controllers, do not contain any SUBSYS-ID.
I am not sure, whether I will remember to add the specific SUBSYS-ID of your Controller, when I am going to mod+sign the next upcoming Intel USB 3.0 drivers.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1332 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 7:03 pm (Last edited: Wed Nov 29, 2017 7:18 pm)

iWARR

Show info

Posts:	70
Registered since:	05.30.2015

Zitat von Fernando im Beitrag #1331
I am not sure, whether I will remember to add the specific SUBSYS-ID of your Controller

Don't worry, just put back the standard strings for ASUS Z77 you had all the time before (but missing in the last version), this will be enough (I've use it right now also):

1
2
3
4
5
6
7
 
[Intel.NTAMD64]
%IUsb3XhcDeviceDesc01% = IUsb3XhcModel, PCI\VEN_8086&DEV_1E31&REV_00 
%IUsb3XhcDeviceDesc01% = IUsb3XhcModel, PCI\VEN_8086&DEV_1E31&REV_01 
%IUsb3XhcDeviceDesc01% = IUsb3XhcModel, PCI\VEN_8086&DEV_1E31&REV_02 
%IUsb3XhcDeviceDesc01% = IUsb3XhcModel, PCI\VEN_8086&DEV_1E31&REV_03 
%IUsb3XhcDeviceDesc01% = IUsb3XhcModel, PCI\VEN_8086&DEV_1E31&REV_04 
 
 

... etc

reply

#1333 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 7:04 pm (Last edited: Wed Nov 29, 2017 7:07 pm)

@Fernando:

ASMedia USB 3.0+3.1 Drivers & Software Set v1.16.49.1 works fine on ASUS P8Z77-V DELUXE !

It's hard to find good versons of the ASMedia USB 3.0 for the ASUS mobos, not every pack will work.
For example, v1.16.45.1 and v1.16.47.1 didn't.

So, I'm happy to have recent v1.16.49.1 working at last. Thank you very much for your great support, Fernando :)

reply

#1334 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 7:27 pm (Last edited: Wed Nov 29, 2017 7:28 pm)

Zitat von iWARR im Beitrag #1332
Don't worry, just put back the standard strings for ASUS Z77 you have all the time before (but not in the last version), this will be enough

Ahhhh, now I remember, that I had prepared 2 different variants of the last mod+signed Intel USB 3.0 drivers, one of them with DEV_1E31 support, the other without, but only the latter variant has been uploaded and linked within the start post of this thread (Title: "Only for Intel Chipsets from 8-Series up").
So it would be no problem for me to offer the variant with DEV_1E31 Controller support within the start post.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1335 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Nov 29, 2017 7:43 pm

@Fernando:
The question is why "Controller Driver" was recognized as "Unsigned" (can be installed rebooting into Windows unsigned driver install mode only), but "Hub Driver" and "Switch Driver" have no issues?

reply

Please enter a reason for warning.