Had same problem with certificate as guys above, but v5.0.3.42 installed fine. Finally i got properly working usb on asus rog g752vl. Thx a lot!

Hello Fernando,
I have HardwareIDs like below and I can't install those modded drivers.
System is Win10 x64
Drivers are for Intel eXtensible
Do you have any idea why?

PCI\VEN_8086&DEV_8C31&SUBSYS_20528086&REV_04
PCI\VEN_8086&DEV_8C31&SUBSYS_20528086
PCI\VEN_8086&DEV_8C31&CC_0C0330
PCI\VEN_8086&DEV_8C31&CC_0C03

Regards

I forgot to install certificates
Now evertyhing works fine :) Thank you very much!

Hello
Windows 10 USB drivers for Intel USB 3.0 chipsets are totally broken and only.

_________________________
Promotion link removed by Fernando

I need the USB driver for Windows XP.
HardwareID= VEN_8086&DEV_A12F
There is no news on this issue?

@Fernando

Your work on these drivers has been excellent. I use a high speed USB camera and was very frustrated that I could not get full 120fps using computers on Windows 10 (it was only getting about 65-70fps). Almost a year ago I used your procedure on a Toshiba laptop that came with Windows 7 and was upgraded to Windows 10. The procedure worked and allowed me to get full speed fps. The procedure did not work on laptops I have that came with windows 10 installed. I assumed this was because they never had the windows 7 "better" drivers specific to Intel. I tried the procedure again on a Toshiba machine that came with windows 10 using the new driver you added a few months ago and it worked. Now I have another machine that I have applied this procedure to and it is still not getting full fps and I have a theory on why not but welcome your ideas.

Specs:
Eluktronics (they build locally using components manufactured by other companies) 17" laptop
Intel i7-6700HQ
64GB RAM
Windows 10 Home 64-bit

Because this computer has 6th generation i7, i was able to partition the hard drive and install Windows 8.1 on the other partition. When I boot Windows 8.1, the camera works at full speed. When I boot Windows 10, it loses frames.

Because this computer has 3 x USB 3.0 ports and 2 x USB 3.1 Type-C ports, my theory is the driver you modified does not work with a computer that has multiple USB HUBs and Host Controllers.

When I look at the device manager in Windows 10, it shows:
Intel(R) USB 3.0 eXtensible Host Controller
Intel(R) USB 3.0 Root Hub
USB Composite Device
USB Composite Device
However, when I plug something into the USB 3.1 Type-C port, it shows:
Intel(R) USB 3.0 eXtensible Host Controller
Intel(R) USB 3.0 Root Hub
Intel(R) USB 3.1 eXtensible Host Controller - 1.10 (Microsoft)
USB Composite Device
USB Composite Device
USB Root Hub (USB 3.0)

When I plug into the USB 3.1 Type-C port within Windows 8.1, I get a different list (presumably because Windows 8 does not support USB 3.1):
Intel(R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft)
Intel(R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft)
USB Composite Device
USB Composite Device
USB Root Hub (xHCI)
USB Root Hub (xHCI)

Windows 8.1 is not very stable on this machine, so I really don't want to use it and would like to have a way to get the USB driver and device working properly on Windows 10.

Any ideas/thoughts?

@Fernando

Are you running Win10 Pro or home on that machine? I have home and have wondered if it would make any difference if I upgraded to Pro. I haven't seen anything in the release notes related to USB so didn't think it could be a part of the issue but figured it was worth asking.

I have a Asus Z270E board, with windows in box driver i get insanely low performance. With modded driver no problem while transferring small files, while transferring large files usb disconnects & reconnects again frequently.

I suspected it could be power, so bought usb hub with power adapter, still the same problem.

usb 2.0 ports works always fine.

Hello Fernando,

I am using windows 10 64 bit
usb 3.0 are with Intel Z270
usb 3.1 with ASM2142