didnt help!

the strange thing is that after i removed it and all of the other win-raid certificated found there and restarted the computer, still other win-raid drivers such as the rst drivers kept on working?!?!

anyway i am giving up on trying to install the new driver. maybe on my next reinstallation of windows 10 i will try again.

the results so far are:
both of your drivers (5.0.4.43 & 5.0.0.32) gave me same results which are ~26 Mb/Sec
the Microsoft driver (10.0.15063.296) gave me ~ 40 MB/sec

in the past before windows 10 was updated to the anniversary update the 5.0.0.32 driver gave me 80 MB/sec.

so besides the fact that i cant install the new driver, it doesnt seem to give me any good results anyway.
if anyone can explain that...?

I have not read the whole topic, anyone has done tests with the ASMedia 1074 controller and Intel to compare the results?
What is the best driver for the 1074 ?

Thanks

@Fernando,
On my W10 64bit X99 PC I observe with USB 3.0 drivers available the same problems (MS or Intel) for a same USB 3.0 SSD device .
The unplugg request does take several tens of seconds to authorize to unplug the key.
Other problem: a random lost of Letter Player (I have to reassign manually the letter to the device).
I ignore the reasons.

@Fernando,
You are right, I have also tested the same device plugged into USB 3.1 ASMedia port. (however a more performant driver than Intel or MS driver)

I observe also about 50s to get the "unplug authorization".
I suspect a W10 factor (may be a TRIM delay ?)
For me it is not a display delay because the USB key LED does indicate when the key can be safely unplugged, and the authorization does appear when the LED goes off.

Hello everyone!
I have troubles using a laptop msi gs40 notebook (Windows 10 x64 Home) and an "Orico 2 Bay Dock USB 3" with usb 3.0 drivers.
When i transfer files from host to the external drive it hangs, and freeze my computer. I read about this problem and i think the solution is change the Intel usb drivers.
Can i use some of the listed driver ? My chipset is Intel 100/230 (i tested with chipset 8 series without luck)

Thanks for helping me !

@Fernando
Which one do you need ? (Idk which device i need to get the ID)

Display it's in spanish, but i think is understandable

Hello ! @Fernando

I can see 3 Controllers (with no devices connected to the external USBs of the laptop)
1. USB root hub (xHCI) - HWID: USB\ROOT_HUB30&VID8086&PIDA12F&REV0031
2. Intel® USB 3.0 eXtensible Host Controller - HWID: PCI\VEN_8086&DEV_A12F&SUBSYS_11551462&REV_31
3. USB Composite Device - HWID: USB\VID_04F2&PID_B536&REV_8251

Also when i connect the Orico Dock Station to the USB port i get this device on the "STORAGE CONTROLLERS" section
SCSI storage device connected via USB (UAS)
HWID: USB\VID_152D&PID_9561&REV_0105

Please let me know if you need another hwid to look into it! Thanks a lot for your help

Thanks @Fernando , i will test it.