Forum - RE: USB 3.0/3.1 Drivers (original and modded)

#541 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 05, 2016 8:30 am

@Fernando
The current PCI bus driver installed is:

The Intel concentratreur MTT USB 2.0 hub driver was automatically installed when i updated the Intel USB 3.0 modded hub driver.

Seems this is specific to the motherboard architecture because Intel USB 2.0 and USB 3.0 hubs are not independant.

ASUS Sabertooth X99/USB 3.1, W10 x64 21H2 NVMe i750, BIOS v4101, CPU Intel i7 5930K, 32GB DDR4, Asus GTX 1660TI 6GB DDR6
ASUS PRIME Z390M-Plus W11 x64 21H2 22000.194 NVMe 970 , BIOS v3004, 16GB DDR4, CPUs: Intel i3-8100 (4 cores) +UHD 630, i5-9400F (6 cores) +GTX 980.

reply

#542 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 05, 2016 9:00 am

Zitat von 100PIER im Beitrag #541
The current PCI bus driver installed is:

The device, which should get the Intel USB 3.0 Switch driver, is named "PCI Express Root Complex" and will be renamed thereafter to "PCI Bus".

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#543 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 05, 2016 10:04 am

@Fernando,
At the moment I have PCI bus and PCI Express Root complex:

So, do you suggest for the Intel USB 3.0 modded driver, Step 3 "Switch Driver", to update 'PCI Express Root Complex' and this will automatically also update 'PCI bus' ?

ASUS Sabertooth X99/USB 3.1, W10 x64 21H2 NVMe i750, BIOS v4101, CPU Intel i7 5930K, 32GB DDR4, Asus GTX 1660TI 6GB DDR6
ASUS PRIME Z390M-Plus W11 x64 21H2 22000.194 NVMe 970 , BIOS v3004, 16GB DDR4, CPUs: Intel i3-8100 (4 cores) +UHD 630, i5-9400F (6 cores) +GTX 980.

reply

#544 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 05, 2016 11:06 am

Zitat von 100PIER im Beitrag #543
So, do you suggest for the Intel USB 3.0 modded driver, Step 3 "Switch Driver", to update 'PCI Express Root Complex'

Yes, that is what I recommend to do. By the way: You can read the exact procedure within the start post of this thread.

Zitat
and this will automatically also update 'PCI bus' ?

No. The device named "PCI Express Root Complex" will be renamed to "PCI Bus" after having installed the USB 3.0 Switch driver. The other device named "PCI Bus" will probably stay untouched. Don't try to update its driver.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#545 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 05, 2016 12:45 pm

@Fernando,
Yes, the device named "PCI Express Root Complex" has been changed to "PCI Bus", and now I have 2 devices named "PCI Bus", one is the MS native item, the other one is the Intel modded driver (switch) item.
Here are the 2 "PCI Bus" screenshoots:
AFTER "PCI Express Root Complex" modded becomes special Intel "PCI Bus":

NATIVE MS "PCI Bus" remains at that:

ASUS Sabertooth X99/USB 3.1, W10 x64 21H2 NVMe i750, BIOS v4101, CPU Intel i7 5930K, 32GB DDR4, Asus GTX 1660TI 6GB DDR6
ASUS PRIME Z390M-Plus W11 x64 21H2 22000.194 NVMe 970 , BIOS v3004, 16GB DDR4, CPUs: Intel i3-8100 (4 cores) +UHD 630, i5-9400F (6 cores) +GTX 980.

reply

#546 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 05, 2016 1:45 pm

@100PIER:
Yes, now everything has been configured correctly.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#547 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Aug 09, 2016 9:42 am (Last edited: Tue Aug 09, 2016 9:48 am)

Hi Fernando I am having a strange problem, when I eject a USB drive it doesn't fully eject, the USB drive is still visible in explorer. I can still right click the drive and get options. I've tried installing the latest intel USB 3.0 drivers but he problem remains.
Image below shows problem
EjectImage

My Workstation: MB: ASUS Z170-WS, RAM: CORSAIR 16GB (2x8) 3000mhz, GPU: EVGA GTX 980Ti FTW, SSD1: Crucial MX300 750GB, SSD2: Crucial MX200 500GB, SSD3: Crucial MX200 500GB, PSU: CORSAIR RM1000x

reply

#548 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Aug 09, 2016 1:30 pm

Zitat von EliteGhost im Beitrag #547
when I eject a USB drive it doesn't fully eject, the USB drive is still visible in explorer. I can still right click the drive and get options. I've tried installing the latest intel USB 3.0 drivers but he problem remains.

I doubt, that this issue has been caused by the in-use USB 3.0 driver.
To find out, whether it is a special USB 3.0 problem, please connect the Corsair USB Flash Drive to any non-Intel USB port or to an Intel USB 2.0 port and repeat the procedure.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#549 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Aug 10, 2016 12:20 am

Thanks for replying, just tried plugging in the Corsair USB into the USB 2.0 ports and the ASmedia ports, same result. One thing I just realized is that on this fresh install, I installed the newer Intel Chipset Device Software v10.1.1.27 instead of the 10.1.1.13. Could the newer version configured my chipsets incorrectly?

My Workstation: MB: ASUS Z170-WS, RAM: CORSAIR 16GB (2x8) 3000mhz, GPU: EVGA GTX 980Ti FTW, SSD1: Crucial MX300 750GB, SSD2: Crucial MX200 500GB, SSD3: Crucial MX200 500GB, PSU: CORSAIR RM1000x

reply

#550 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Aug 10, 2016 12:25 am

Zitat von EliteGhost im Beitrag #549
I installed the newer Intel Chipset Device Software v10.1.1.27 instead of the 10.1.1.13. Could the newer version configured my chipsets incorrectly?

I don't think, that the update of the Intel Chipset Device INF files is the reaon for the issue.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#551 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Aug 10, 2016 12:39 am (Last edited: Wed Aug 10, 2016 4:13 am)

Just noticed this in event viewer( The driver detected a controller error on \Device\Harddisk3\DR3) I just checked and its my other Adata USB drive that causes the error when plugged in. I also tried updating the chipset device software to 10.1.1.32 but made no difference.

Edit: Doesn't matter which USB drive I plug this error shows up in event viewer(The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_CORSAIR&PROD_VOYAGER&REV_3000#AA04012700007823&0#).

My Workstation: MB: ASUS Z170-WS, RAM: CORSAIR 16GB (2x8) 3000mhz, GPU: EVGA GTX 980Ti FTW, SSD1: Crucial MX300 750GB, SSD2: Crucial MX200 500GB, SSD3: Crucial MX200 500GB, PSU: CORSAIR RM1000x

reply

#552 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 19, 2016 9:10 pm

Thank you so much for the modded Intel drivers for Windows 10! I have an Acer Aspire V5-591G and after installing Windows I encountered this strange issue. Everything worked except USB 3.0 devices plugged into USB 3.0 ports. I've been looking for a solution for a few days now and nothing has helped except for this. There was no such driver on Acer's driver download site.

reply

#553 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Aug 19, 2016 10:20 pm

@dmat:
Welcome at Win-RAID Forum and thanks for your positive feedback!

Zitat von dmat im Beitrag #552
There was no such driver on Acer's driver download site.

No wonder, because Intel has never released an Intel USB 3.0 driver, which natively supports Win10.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#554 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Aug 24, 2016 12:44 pm

@ all:
Update of the Start Post

Changelog:

new: 32/64bit AMD USB 3.1 Drivers v1.0.2.0 WHQL dated 02/26/2016
Note: These drivers may be usable with all Windows Operating Systems from XP up to Win10. Supported are the AMD USB 3.1 Controllers DEV_43B9, DEV_43BA, DEV_43BB and DEV_43BC.

Good luck with these new AMD USB 3.1 drivers!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#555 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Aug 24, 2016 4:20 pm

If someone needs CH341A USB EEPROM Bios Writer I have some on stock, deliverable from Berlin.

reply

Please enter a reason for warning.