A couple of days ago I purchased the Dell DA200 adapter to use with a Dell XPS15 9550 notebook (Windows 10 x64) over the USB-C port. It was very hard to make it work: from the first insertion the devices were blinking in and out of the device manager. I've found advices on the internet telling to reduce the power of the WLAN card to 75%... It did not always work, it was better to disable the card completely. Long story short, after two days of frustrations I've found your modded drivers for USB 3.1 and installed it. First tests are running quite well, no devices blinking and I've restored full power to the WLAN adapter. We'll see how it's going on from now. Thank you!

Is it not your post #458 ? :)

Hi Fernando,

Maybe you are my last hope :-)

I have a PC with
MSI Z77A-GD65 motherboard with intel USB 3.0 controller
Windows 10 x64
32 Gb RAM
I updated everything i can and actaully i have no updating waiting

I have also a ICY BOX ib-121cl-u3 USB 3.0 docking station which doesnt'work properly in Win 10.

What do you suggest to try?

thank you very much for your answer

This is the answer of Redsonic producer of ICY BOX:
Good morning, after talking to our support they recommend to download and install the driver from your mainboard manufacturer site.
If you added the USB interface by an extension card you need to check their homepage.

and this is the answer of MSI producer of motherboard:
Do you mean you want the usb 3.0 drivers for win10 system? We are sorry that this motherboard is a little old, the chipest vendor didn't supply us the drivers for win10 system, we have no drivers to provide for you. Sorry for any inconvenience caused you.
Thanks for your cooperation in advance! Best Regards,
MSI Technical Support Team

I tried to install
64bit Intel USB 3.0 Drivers v4.0.5.55 mod+signed by Fernando

and i haven't had positive installation.

After a reboot now, I don't know why, ICY BOX seems to work properly
but I always have an error in Device mangement

Thanks for your patience



edit:

after another reboot ICY BOX doesnt'work again

Zitat von Fernando im Beitrag #504

---

@alninek:
Please give me the HardwareIDs of the devices named "Controller host Intel(R) USB 3.0 eXtensible 1.0 (Microsoft)" and "Dispositivo sconosciuto". You will get them by doing a right-click onto the device and choosing the options "Properties" > "Details" > "Property" > "HardwareIDs".

---

Zitat von Fernando im Beitrag #506

---

@alninek:
Thanks for the HardwareIDs.
The "mod+signed" Intel USB 3.0 drivers v4.0.5.55, which I am offering within the start post of this thread, do support the DeviceID DEV_1E31. The problem may be to get them manually installed without an alternative USB port.

---

Zitat von Fernando im Beitrag #508

---

I meant, that you can take my "mod+signed" variant of the Intel USB 3.0 driver v4.0.5.55, if you should have any troubles with the Win10 in-box USB 3.0 driver.

---

just for info...

today ICY BOX doesn't work again