Forum - RE: USB 3.0 Drivers (original and modded)

#436 | RE: USB 3.0 Drivers (original and modded) datum

Thu May 19, 2016 7:26 pm

@stevvie:
Welcome at Win-RAID Forum and thanks for your useful contribution!
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#437 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu May 19, 2016 8:13 pm

Zitat von Fernando im Beitrag #424
@Ranma:
Check the HardwareIDs of your on-board USB 3.1 Controller and compare them with the HardwareIDs, which are listed within the file named ausb3xhc.inf.

Thanks for your answer, how do I check the hardware ID on ausb3xhc.inf?
I found this "ClassGuid={36FC9E60-C465-11CF-8056-444553540000}" but dont know if that's the one, nor what I should do with that info

Again, thank you

reply

#438 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu May 19, 2016 8:27 pm

Fernando

Show info

Posts:	18783
Registered since:	04.27.2013
Location:	Germany

Zitat von Ranma im Beitrag #437
how do I check the hardware ID on ausb3xhc.inf?

This is the related part, which contains the supported HardwareIDs:

1
2
3
 
[Intel.NTAMD64.6.1]
%IUsb3XhcDeviceDesc01% = IUsb3XhcModel, PCI\VEN_8086&DEV_15B5 	 
%IUsb3XhcDeviceDesc01% = IUsb3XhcModel, PCI\VEN_8086&DEV_15B6
 

That means, that the Intel USB 3.1 Controllers with the DeviceID DEV_15B5 and DEV_15B6 are supported by the driver.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#439 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu May 19, 2016 8:32 pm

Ok so my USB 3.1 Controllers are these:

PCI\VEN_8086&DEV_15B6&SUBSYS_11112222&REV_00
PCI\VEN_8086&DEV_15B6&SUBSYS_11112222
PCI\VEN_8086&DEV_15B6&CC_0C0330
PCI\VEN_8086&DEV_15B6&CC_0C03

that means that they should be compatible, right?

reply

#440 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu May 19, 2016 9:20 pm

Zitat von Ranma im Beitrag #439
that means that they should be compatible, right?

Yes.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#441 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri May 27, 2016 12:59 am

Hi Fernando and all good people here :).
I have read most of the "Renesas" related posts of this topic, because I suposed to have a problem with Renesas controller.
My USB3 problem on Asus k55vm I7-3610qm with Win 7 was about randomly short disconnect/reconnect of USB3.Strange for me was that DVD drive sound like "reset" during this short moments.
Looking from time to time for a solution, I have found a forum where the explanation was about a bad energy management of Renesas controller causing those random short power falls.
Also on that forum i found a link to the solution :
https://downloadcenter.intel.com/downloa...-USB-3-0-Driver
Everything was ok until I have upgrade to Win10 when the problem came back because of the Win 10 USB3 controller driver.
Reinstalling attempt was unsuccessfully because "You already have the best driver".
Now, my hardware ID is DEV-1E31, but doesn't look like the one mentioned on first page of the topic in Renesas section, but on Intel , so I tried the b) version.
So far, installation was ok, but I'll come back in a few days with feedback on my random power fall problem and hope to be helpful to someone else with same issue.

Regards,
Adyb

reply

#442 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri May 27, 2016 10:10 am

@adyb:
Welcome at Win-RAID Forum!
Your problem has nothing to do with Renesas USB 3.0 Controllers. Since the DeviceID of your on-board USB 3.0 Controller is DEV_1E31, it is an Intel and not a NEC/Renesas one.
The latest Intel USB 3.0 drivers v4.0.5.55 WHQL natively do not support DEV_1E31 USB Controllers, but the mod+signed variant may work with your system.
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#443 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat May 28, 2016 9:13 pm (Last edited: Sat May 28, 2016 9:14 pm)

@ all:
Update of the Start Post

Changelog:

new: pure 32/64bit VIA USB 3.0 Drivers v6.1.7600.5101 WHQL dated 08/20/2015
new: VIA USB 3.0 Drivers & Software Set v6.1.7600.5101 dated 09/07/2015

Thanks to JanCerny for having found and given me the link to the source package.

Good luck with the new VIA USB 3.0 drivers!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#444 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun May 29, 2016 4:38 pm

For Renesas Gen2 USB 3.0 Controllers (uPD720201) i found a newer drivers in station drivers witch resolve sleep problems .
Can u extract only the driver??

-http://www.station-drivers.com/index.php...id=2162&lang=en

Renesas/Nec uPD720201/720202 USB 3.0 Drivers Version 3.0.23.1 WHQL

i7 4790,rx580,16gb ram,x-fi titanium pcie,asrock anniversary z97

reply

#445 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun May 29, 2016 5:37 pm (Last edited: Sun May 29, 2016 5:39 pm)

Hey,

i just updated my system from z77 Sabertooth to Asrock OCF Z170.

After the installation of your modded USB3.0 Intel drivers the following USB-Hub updated itself too. Is this behavior correct?

reply

#446 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun May 29, 2016 5:47 pm (Last edited: Sun May 29, 2016 9:09 pm)

Zitat von pfinchen im Beitrag #445
After the installation of your modded USB3.0 Intel drivers the following USB-Hub updated itself too. Is this behavior correct?

I suspect, that it is ok.
Questions:
1. Which OS are you running (a Signature would be fine)?
2. Did you install the Intel USB 3.0 "Switch driver" as well?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#447 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun May 29, 2016 5:55 pm

@boombastik:
Welcome at Win-RAID Forum and thanks for your info about the new Renesas USB 3.0 drivers!

Zitat von boombastik im Beitrag #444
Can u extract only the driver??

I will try it this evening and offer them within the start post of this thread (if I should succeed with the extraction).
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#448 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun May 29, 2016 6:27 pm (Last edited: Sun May 29, 2016 6:31 pm)

Zitat von Fernando im Beitrag #446
1. Which OS are you running (a Signature would be fine)?
2. Did you install the Intel USB 3.0 "Switch driver" as well?

WIn10 x64
And all three drivers are installed and seemed to work fine :)

reply

#449 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun May 29, 2016 6:32 pm (Last edited: Sun May 29, 2016 7:13 pm)

@Fernando
On my SABERTOOTH x99 i have installed 2 variantes of W10x64 v1511, each one is running on a separate SSD (i750, SM950).
i750 is running my daily W10 version with multiple applications.
SM950 is runing a very light W10 with very few applications and I use it for tests and validations purpose only.

I have installed INTEL USB 3.0 modded driver (v4.0.5.55) on i750 without any problem:

However, on SM950 I did not succeed to fully install the INTEL USB 3.0 modded driver to replace Microsoft native drivers.
Only Intel modded Controller driver can be installed, The Hub driver can't be installed.. W10 warms that driver is not validate..
I have to keep the native USB 3.0 Microsoft driver in place..

I have properly installed the certification on SM950. I got no error message.
Here is the retry of Certificate import:

Is certification process working properly on a dual W10 configuration ?
Do you have any suggestion why a dual W10 configuration system has a problem with your Intel USB 3.0 modded driver ?

ASUS Sabertooth X99/USB 3.1, W10 x64 21H2 NVMe i750, BIOS v4101, CPU Intel i7 5930K, 32GB DDR4, Asus GTX 1660TI 6GB DDR6
ASUS PRIME Z390M-Plus W11 x64 21H2 22000.194 NVMe 970 , BIOS v3004, 16GB DDR4, CPUs: Intel i3-8100 (4 cores) +UHD 630, i5-9400F (6 cores) +GTX 980.

reply

#450 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun May 29, 2016 9:19 pm

Zitat von boombastik im Beitrag #444
For Renesas Gen2 USB 3.0 Controllers (uPD720201) i found a newer drivers in station drivers witch resolve sleep problems .
Can u extract only the driver??

At least I was able to extract the "pure" drivers, but I only found the old v3.0.23.0 drivers dated 08/21/2012, which are already available within the start post of this thread.

Zitat von 100PIER im Beitrag #449
Is certification process working properly on a dual W10 configuration?

Yes, as long as you have installed the Operating Systems onto different disk drives resp. partitions.

Zitat von 100PIER im Beitrag #449
Do you have any suggestion why a dual W10 configuration system has a problem with your Intel USB 3.0 modded driver?

No, I dont have any idea why got a problem with the second OS. It seems to have nothing to do with the Win-RAID CA Certificate.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.