@plutomaniac

The windows 10 drivers does not work either.

Yes the firmware is the latest that is available for the chipset I have mentioned.

Its working when using safe boot @msconfig

@fernando

Thank you for the reply.
Do you know any other forum or website where I can get some help regarding Renesas Usb controller?

@T2MA

The mentioned Renesas USB 3.0 drivers are aimed for Vista/7 according to this post. While inf files are working for installing on 10, the cat files (the ones saying they are actually for Vista/7 to your 10) can be preventing 10 from using them outside safe mode. Probably your only solution is finding equivalent drivers for 10.

Zitat von T2MA im Beitrag #343

---

I am having a Rosewill RC505 usb 3.0 add on card with Renesas/NEC uPD720200A chipset with windows 10 Pro 64 bit OS. The driver version 2.1.39 is already installed. But the card is not detecting any USB devices connected(WD My BOOK/Pendrives).
After some troubleshooting, i found out that it will work when the OS is booted into safe mode.

---

Updated my Sabertooth X99 from Intel USB3.0 v4.0.3.49 to v4.0.4.51.
Works fine.
However, be careful when updating, I have done as this:
Set keyboard and mouse on a non Intel USB 2.0 port.
Update Controller USB 3.0 (iusb3xhc.sys),
Reboot,
Update Intel HUB USB 3.0 (iusb3hub.sys),
Reboot,
Update Intel HUB MTT USB 2.0 (iusb3hub.sys)
Reboot
OK, replug keyboard and mouse on Intel USB 2.0 ports.
A big file transfer test is OK (about 180 Mb/s for a USB 3.0 key)

Hello,
I followed all steps at first message, uninstall reboot, remove all usb device reboot after that, install driver and reboot and check the device manager but nothing changed..
I still have problem with ASMedia. Onboard usb 3 port didnt work with usb 3 device. However i can use usb 2 device with usb3 port. Device manager looks like that (as below). I install the asmedia driver but still nothing changed. I deleted all of usb 3 driver. After that, remove all of my usb device even mouse. Restart pc and again install this asmedia driver however still nothing changed. ( look like SS )

What I did for fix this problem ?
- updated bios 2.7.
- check bios usb 3 settingi usb 3 on.
- Usb legacy disabled from bios ( maybe interested with usb3 ... )

Btw, I can use my usb 3 device any other pc like intel lenovo laptop or friends' gigabyte 970 chipset pc and also this usb 3 device work fine with my usb 2 ports

These are all components,
Windows 10 64 bit.
MSI 970A G46 MB 2.7 bios. ( can check usb 3 driver there: ( https://msi.com/product/motherboard/supp...wn-driver&Win10 64 )
AMD FX6100
16 GB crucial ram
Sandisk SSD
Sandisk usb 3 flash ( https://www.sandisk.com/home/usb-flash/ultra-usb ) it be named sandisk ultra usb 3.0 128 gb

So, what can I do anymore ? Any idea :)


Sorry for language at SS. But u can understand what i mean :)

Hi,
I've been a long time claimer of "you should always disable USB 3.0, it's a dpc latency fest" and that sort of thing.
Now I want to give it a chance again because I just stumbled upon this thread.Though, I need few clarifications. I'm on W7 64Bits.


First, This is a correct iD right? iD screenshot

Second, for the modded drivers it says usable with Win8/8.1/10 and all Intel chipsets from 7-Series up Are these usable on Windows 7?

Third, "Users, who don't have the option to temporarily switch to an USB port," Problem is that I don't know if I have this option, could you help me out where I can find it?

Zitat

---

Since I don't even know the manufacturer and model of your mainboard, I cannot answer this question. Please look into the manual of your mainboard. There you will find, which sorts of USB Controllers are onboard and where the related USB ports are located.
By the way: Since you are running Win7, you can run the installer of the complete original USB 3.0 Drivers & Software Set and will not expect any problems during the installation. Everything will be done by the installer.

---

Thank you for replying so quickly. Aren't the RAW Drivers (with the obvious Device Manager method with Controller Driver first then Hub Driver) better than the usual Software & Drivers set though?