Forum - RE: USB 3.0/3.1 Drivers (original and modded)

#2281 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Jan 06, 2020 1:07 am

@Viroyn:
Welcome to the Win-RAID Forum!
The "pure" 64bit ASMedia USB 3.0+3.1 Drivers v1.16.59.1 WHQL for Win10 (incl. DPInst option) should work with your system.
After having installed them successfully, you can compare these specific drivers, which were optimized for the ASMedia USB 3.1 Controllers and Hub devices, with the generic Win10 in-box MS USB drivers.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#2282 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Jan 06, 2020 7:09 pm

Hi,

I just build a system using i7 4770K and MSI z97 Mpower motherboard. Heres the problem, my USB DAC cant have sound played out from the loudspeaker if the DAC connected to the onboard USB, though the USB DAC is detected, and the audio player is playing the audio file, but no single sound coming out from the speaker. This problem isnt occured if i plug the USB DAC into the pcix USB card by reneseas. Any idea what might be the problem?

Thank you.

Roy

reply

#2283 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 10, 2020 6:20 pm

Hi Fernando,
I`m going CRAZY with this, I`ve been trying to install drivers for my PC for 3 days and couldn`t do it. I have a Gigabyte H310M DS2 with an Intel I3-9100 CPU. WINDOWS 7 32 bits because I have to use an equipment that ONLY works with this freaking Windows version... I`ve tried with EVERY driver that you upload but nothing works! PLEASE can you help me?
Hardware Id:
PCI\VEN_8086&DEV_A36D&SUBSYS_50071458&REV_10
PCI\VEN_8086&DEV_A36D&SUBSYS_50071458
PCI\VEN_8086&DEV_A36D&CC_0C0330
PCI\VEN_8086&DEV_A36D&CC_0C03

Thanks!

reply

#2284 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 10, 2020 6:57 pm

@feta:
Welcome to the Win-RAID Forum!
The "normal" Win7 Intel USB 3.0/3.1 drivers do not work with modern Intel chipsets. That is why you cannot install the drivers, not even the mod+signed ones, which I am offering within the start post of this thread.
You can find working Intel USB 3.0/3.1 drivers, which support Win7 and your system >here<.
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#2285 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 10, 2020 7:36 pm

WOWWWW Fernando THANK YOU SO MUCH!!! This actually worked! Now I´m having the same issue but with de PCI drivers... but I´ll look for them! Again thank you soooo much

reply

#2286 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 10, 2020 9:35 pm

@feta I suggest you use the drivers that are labeled with Windows 10, so did I on my brother's gaming PC with an ASRock Z390 Pro4.

My Windows 7-ISOs and Tools:
ftp://fudi.internet-box.ch/NT%206.1/SP2.10/
Username: nutzer
Password: 132

reply

#2287 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 16, 2020 8:33 pm (Last edited: Thu Jan 16, 2020 9:24 pm)

Hi Fernando! I successfully installed the AMD DEV_43D5 Controller Driver but when I navigate to the Hub Driver folder & try to run the x64 amdhub31.exe I get an error message stating, "This package is not compatible with the platform of Microsoft Windows you are running. This application will now abort."
I'm running Windows 10 x64 10.0.18363 Build 18363
I didn't see any USB Hubs with missing drivers in Device Manager when I rebooted. Did I do something wrong?

EDIT: NEVERMIND! I found it. It wasn't under USB Controllers. It was in Other Devices. Thank you for this! I'll report back & let you know if it fixes my issue.

reply

#2288 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 16, 2020 9:27 pm

@D-ManNC :
Welcome to the Win-RAID Forum!
It is fine, that you sorted out yourself the reason of your problem.
Regards
Dieter (alias Fernando)

P.S.: To save space I have merged your 2 posts about the same topic.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#2289 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 16, 2020 10:37 pm (Last edited: Sat Jan 18, 2020 8:39 am)

Zitat von Fernando im Beitrag #2288
@D-ManNC :
It is fine, that you sorted out yourself the reason of your problem.

I'm reporting that it didn't solve my problem. My USB audio interface is still disconnecting.

reply

#2290 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Jan 18, 2020 8:36 am

@Fernando
AMD updated its new USB 3.1 driver for navi10 usb-c and APU win7 USB driver.

reply

#2291 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Jan 18, 2020 9:26 am

@canonkong:
Thanks for the info.
Please give me the link to the extracted latest "pure" AMD USB drivers. Unfortunately I cannot get these drivers unzipped from the latest AMD Chipset Drivers Installer Set (don't have a system with an AMD Chipset)..

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#2292 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Jan 18, 2020 9:34 am (Last edited: Sat Jan 18, 2020 1:58 pm)

@Fernando
AMD NEW USB3.1 DRIVER FOR WIN7 64BIT

canonkong has attached files to this post

USB3.1 Driver.zip

reply

#2293 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Jan 18, 2020 5:59 pm

I'm making an integrated install ISO for Win 7 for a Ryzen 3000 system. But I'm hoping to also be able to use this ISO/Flash drive to be able to install Intel systems as well.

The main Intel system I have now is i5 4690K with Z97X chipset. Can any of the drivers on the first page help with that? Or should I just use the driver on Gigabyte's website from 2014? It's Windows 7 compatible. But what I am worried about is if there will be a conflict, if I integrate the 2014 driver.. and then also integrate the Intel drivers for future systems and chipsets. On the motherboard page this is what it says for the driver.. Intel USB 3.0 Driver [3.0.4.65] 5.19 MB 2015/05/27 but in Device Manager it says 3.0.0.16 12/02/2014.

If I want to integrate the 2014 driver into an install.wim should I avoid using any future Intel chipset drivers, or will it be ok? I don't know a lot about this stuff, but if I had to guess, I need to integrate the last version of the official drivers that offered Windows 7 support, and then install any other drivers with the certificate and manual installation after the Windows installation is complete?

reply

#2294 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Jan 18, 2020 6:13 pm

@JonW:
If you want to know the latest AMD or Intel USB 3.0/3.1 drivers, which support Windows 7 and your specific AMD/Intel system, you should post the HardwareIDs of the related Intel/AMD USB 3.0/3.1 Controller (right-click onto it > "Properties" > "Details" > "Property" > "HardwareIDs").

Zitat von JonW im Beitrag #2293
On the motherboard page this is what it says for the driver.. Intel USB 3.0 Driver [3.0.4.65] 5.19 MB 2015/05/27 but in Device Manager it says 3.0.0.16 12/02/2014.

The first is the number of the Software Set and the latter is the version of the specific driver, which has been installed.
It should be no problem to integrate USB drivers from different manufacturers into an OS Image.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#2295 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Jan 18, 2020 6:25 pm

USB 3.0 Controller - IUSB3\ROOT_HUB30&VID_8086&PID_8CB1&REV_0000&SID_50071458
USB 3.0 XHC Controller - PCI\VEN_8086&DEV_8CB1&SUBSYS_50071458&REV_00

For AMD, I don't have the system installed yet but by the inf files..

%AMDUSB3\ROOT_HUB3.DeviceDesc% = AMDHUB3, AMDUSB3\ROOT_HUB3
%AMDUSB3\CLASS_09&SUBCLASS_00&PROT_00.DeviceDesc% = AMDHUB3, AMDUSB3\CLASS_09&SUBCLASS_00&PROT_00
%AMDUSB3\CLASS_09&SUBCLASS_00&PROT_01.DeviceDesc% = AMDHUB3, AMDUSB3\CLASS_09&SUBCLASS_00&PROT_01
%AMDUSB3\CLASS_09&SUBCLASS_00&PROT_02.DeviceDesc% = AMDHUB3, AMDUSB3\CLASS_09&SUBCLASS_00&PROT_02
%AMDUSB3\CLASS_09&SUBCLASS_00&PROT_03.DeviceDesc% = AMDHUB3, AMDUSB3\CLASS_09&SUBCLASS_00&PROT_03
%AMDUSB3\CLASS_09&SUBCLASS_01.DeviceDesc% = AMDHUB3, AMDUSB3\CLASS_09&SUBCLASS_01

and

%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_10DE&CC_0C0330 ; Nvidia USB-C
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_13ED ; Ariel Type A
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_13EE ; Ariel Type C
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_145C ; Family 17h
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_145F ; Zeppelin
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_148C ; Starship
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_149C ; Matisse <--- pretty sure this is mine
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15D4 ; FireFligh
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15D5 ; FireFligh
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E0 ; Raven
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E1 ; Raven
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E5 ; Raven2
%AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_1639 ; Renoir

Are all the drivers on the first page the same that are integrated into Simplix Win7USB3 utility and his UpdatePack7R2? I was on his page translated from Russian earlier, and in the comments section someone asked for all of the drivers unpacked (to be installed manually) and it linked to this page. Does his tool include the official drivers but not the modified ones, or did he just link here because it's a good resource?

reply

Please enter a reason for warning.