@Fernando

Is there any remote chance that we can still use Secure Boot with the >"pure" 64bit Intel USB 3.0/3.1 Drivers v5.0.4.43 re-mod+signed by me (with DPInst option)< drivers installed? Are these drivers better than the generic MS drivers in Windows 10?

Zitat von Fernando im Beitrag #2193

---

Why don't you test it yourself and report here about your results?
It is very safe, if you set a "Restore Point" before starting your tests.

---

@Fernando:
Right but that's too late for me now. I did not create a Restore Point after disabling Secure Boot.

I am trying to fully run Windows 7 on an HP 800 G4 SFF computer. There are various problems that I manage to solve somehow. Still, I can't handle the USB ports. The problem is that I can't boot USB completely (and thus the keyboard and mouse do not work). Thus, each attempt is to compile new drivers into the system image on the virtual machine and restore the image on the computer. Maybe someone will be able to help me and point out some drivers where there is a chance that they will work.

System: Windows 7
ID: DEV_A36D

Hi @Fernando , first of all many thanks for all the great info! I spent hours on your forum for the last 2 days. I thought that I could find the solution to my problem myself but... I’m giving up…

I have two Dell Precision 5600 workstations running Windows 10 64 Pro. Both have exactly the same issue, so im pretty sure its not hardware related : the two USB 3.0 ports run at USB 2.0 speeds. I tried almost everything that I could read here or online in general.

The motherboard is a Dell Intel C600 / X79
The USB 3.0 ports are Renesas uPD720200a (I use the last Renesas firmware 4021)
My current Driver are : 2.1.39.0 (the ones on this thread but I also tried the official Dell version)
I tried to change the settings in the bios of course : front pannel activated, deactivated, USB 3 activated or deactivated. When I disable USB 3, the Renesas don’t show up anymore of course.
I also did a bios downgrade from A19 (last 2019 version) to A14.
I also tried all the recommended Windows tricks to deactivate the Power management settings or cache optimization etc.
Of course, the drives I am using are USB 3.0 (on my other PC or Mac).

Here are some AIDA64 screens, as you can see the USB 3 ports are stuck at USB 2 speeds.

If you have the time to give it some thoughts, what would you try next?

Thanks in advance,

Mizou

Sure thing! Safe travels.

Laurent

Hello. I have a laptop lenovo ideapad 310 15iap

Apollo lake Toronto 5d2

USB\ROOT_HUB30&VID8086&PID5AA8&REV000B
USB\ROOT_HUB30&VID8086&PID5AA8
USB\ROOT_HUB30

PCI\VEN_8086&DEV_5AA8&SUBSYS_380317AA&REV_0B
PCI\VEN_8086&DEV_5AA8&SUBSYS_380317AA
PCI\VEN_8086&DEV_5AA8&CC_0C0330
PCI\VEN_8086&DEV_5AA8&CC_0C03


When I change the scheme above it gives an error 10
Version driver 5.0.4.43

My system windows 7 x64

Hi @Fernando,

Thanks for your answer. Thats for the controller :

PCI\VEN_1033&DEV_0194&SUBSYS_04961028&REV_04
PCI\VEN_1033&DEV_0194&SUBSYS_04961028
PCI\VEN_1033&DEV_0194&CC_0C0330
PCI\VEN_1033&DEV_0194&CC_0C03

And root hub :

NUSB3\ROOT_HUB30&VID_1033&PID_0194&REV_0004&SID_04961028
NUSB3\ROOT_HUB30&VID_1033&PID_0194&REV_0004
NUSB3\ROOT_HUB30&VID_1033&PID_0194

And a screen of the device manager.

Laurent