Forum - RE: USB 3.0/3.1 Drivers (original and modded)

Win-Raid Forum (Drivers - Firmware - Modding) � Important Drivers (AHCI/RAID, NVMe, USB etc.) � General: Storage Drivers (AHCI/RAID, NVMe and USB) � USB 3.0/3.1 Drivers (original and modded)

Page 133 of 174 � Page 1 ... 128 129 130 131 132 133 134 135 136 137 ... 174 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1981 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Feb 23, 2019 4:55 pm (Last edited: Sat Feb 23, 2019 5:53 pm)

Zitat von gordo999 im Beitrag #1978
@omicron...I'm not finished yet, still at it.

Reading through your post, I'm getting a bit confused. You are using Windows 7, right?

I'm am easily able to get to where the driver installs without issue, it just returns a 31 when it actually runs. Did you get that far?

reply

#1982 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun Feb 24, 2019 6:16 am (Last edited: Sun Feb 24, 2019 6:22 am)

@Omicron....yes, I am using Win 7. The only way I can load your drivers, or try to, is by opening the legacy hardware install window in Driver Manager. When I first opened the window there were no USB drivers listed. I had to alter a setting in the registry to get them to appear. The drivers will not load using that method.

Can you describe with a bit of detail how you managed to load your drivers?

PS. there could be an issue with my version of W7. It's been installed for a long time and maybe there are issues. I am thinking of doing a full Win 7 install on a spare drive but that will mean using DISM to install USB drivers on my install disk image.

I could always use the PS/2 ports or my peripheral USB 3 card drivers.

I am thinking that maybe an earlier version of the Windows updates may allow the USB 3 drivers to install. I have slip-streamed W7 SP1 onto my W7 install disk but the updates are a couple of years old.

reply

#1983 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun Feb 24, 2019 4:48 pm

@gordo999

Alright, first, I'm using Windows 7 Pro (or Embedded Standard) and have the update rollup for March 2017 installed. These are the exact steps I'm doing:

1. Open device manager.
2. Right click unknown USB device in the unknown device tree.
3. Click properties.
4. Click "Update driver."
5. Click "Browse my computer for driver software."
6. Click "Let me pick from a list of device drivers."
7. Click Next while on "Show all Devices."
8. Click "Have Disk."
9. Navigate to the folder with Usbxhci.inf and .sys for your appropriate 32/64 bit OS.
10. You should now see one device highlighted with a block box, "USB xHCI ..."
11. Click Next
12. Click Yes *if* you get a prompt complaining about incompatible drivers.
13. Click "Install this driver software anyway" for the red signing prompt.
14. Enjoy your Code 31 failing driver if you have the hotfix, or Code 39 otherwise.

reply

#1984 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Feb 25, 2019 3:12 am

@Omicron

Zitat von Omicron im Beitrag #1979
I'm am easily able to get to where the driver installs without issue, it just returns a 31 when it actually runs. Did you get that far?

Sorry, missed this part. I get nothing at all. If I get to the legacy window where it asks if I have a disk, and I direct it to the INF file in your package, the process stalls for a bit then returns me to the screen where the hardware options are listed. In other words, your drivers won't load.

My W7 version is 6.1.7601 Service Pack 1 Build 7601. I am fairly up to date on updates and I am wondering if maybe one of those updates has disabled certain abilities to load drivers for USB 3.

reply

#1985 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Feb 25, 2019 3:27 am (Last edited: Mon Feb 25, 2019 10:51 am)

Zitat von gordo999 im Beitrag #1982
My W7 version is 6.1.7601 Service Pack 1 Build 7601. I am fairly up to date on updates and I am wondering if maybe one of those updates has disabled certain abilities to load drivers for USB 3.

No idea, sounds like an issue with your Windows from what I can tell (like what you mentioned) - wouldn't have a clue what update is suspect.

EDIT by Fernando: Unneeded parts of the fully quoted post removed (to save space)

reply

#1986 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Feb 25, 2019 2:57 pm

@Omicron

Zitat von Omicron im Beitrag #1981

2. Right click unknown USB device in the unknown device tree.
.........
14. Enjoy your Code 31 failing driver if you have the hotfix, or Code 39 otherwise.

I have done all the steps except for these two. I have no 'unknown' USB device listed. I have devices listed for my peripheral USB3 card and one Xhci driver that is not working. There is no hub device other than the device for my peripheral card which works only with its own chipset.

Have not had the pleasure of the errors you have seen. For error 31, Microsoft suggest trying to update the driver. For 39, they suggest uninstalling it it and when it's uninstalled, got to the menu bar and select 'Action'. Select Scan for Hardware. Under 'Action' you can also see Install legacy drivers.

In both cases they will ask you for a disk, so point them to your INF files.

In the old days, I had success by deleting all drivers under a category, like USB, and simply rebooting. Windows finds them and re-installs them or asks you for a disk.

reply

#1987 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Feb 25, 2019 5:16 pm (Last edited: Mon Feb 25, 2019 5:17 pm)

@gordo999

Huh, interesting - so it sounds like you still have the old driver installed on your xHCI controller? You can right click the offending device in the tree, and uninstall the driver via the "driver" tab to the top (make sure to click "delete all drivers for device.") Then just reload devices via the top menu of the devices window which will rebuild the list and should now show "unknown USB controller."

Both error codes mean much more than they are saying - MS just is trying to tell the end user "it's all screwed up."

I'll stick to @ over quotes.

reply

#1988 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Feb 26, 2019 11:10 am (Last edited: Tue Feb 26, 2019 11:12 am)

@Omicron

So I deleted them all and got the unknown USB device. I'll try your steps listed above. Normally, it just loads the xchi driver but there are drivers required like the hub driver and so on. If you don't see a hub driver listed that's likely why you are getting the errors.

reply

#1989 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Feb 26, 2019 4:48 pm

@gordo999

Not quite, I (and you) won't get a hub device to show up because the xHCI driver doesn't load to begin with. The xHCI controller driver has to load before it then finds the hub itself connected to the xHCI controller. No xHCI controller loads, no hub will show up.

reply

#1990 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Mar 01, 2019 2:17 pm (Last edited: Fri Mar 01, 2019 2:18 pm)

@bryant
Hello friend, how are you doing with A36D for windows you got something to install as a working driver?

reply

#1991 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Mar 05, 2019 9:33 am

Hey guys, I'm so glad I found this forum.
My problem is my old USB 3.0 Flash drive doesn't work on some laptops with Win10 (not all). Windows fails to install drivers with code 43. With no help from USB Drive and laptop manufacturers support and some googling I came to idea, that the problem is related both with specific chipset and drivers from MS. This flash drive works if i connect it via USB2.0 extension cable (with 2.0 speed of course).
My system:
OMEN by HP - 15-dc0006ur laptop
Windows 10 Pro
Intel HM370 Chipset
PCI\VEN_8086&DEV_A36D&SUBSYS_84DB103C&REV_10
PCI\VEN_8086&DEV_A36D&SUBSYS_84DB103C
PCI\VEN_8086&DEV_A36D&CC_0C0330
PCI\VEN_8086&DEV_A36D&CC_0C03

To be short, as far as I understand there are no drivers from Intel for 300-series chipset. Modded v5.0.4.43 drivers don't work, doesn't matter how I installed them (with DPInst or manually). After DPInst finishes with success and reboot, MS drivers are still in place. If I update driver for controller manually "with disk" and reboot, driver won't start with code 10. Do I have any chance with this chipset?

reply

#1992 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Mar 05, 2019 10:48 am

@Bulka:
Welcome to the Win-RAID Forum!
We are sorry, but cannot really help you, because usable Intel USB 3.0/3.1 drivers are not available for on-board Intel USB 3.0/3.1 Controllers DEV_A36D and even adding the missing HardwareIDs into the related *.INF file doesn't help. It is the Intel driver itself named iusb3xhc.sys, which seems to be not compatible.
The only USB 3.0/3.1 drivers, which do support your on-board USB 3.1 Controller, are the generic Win10 in-box ones.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1993 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Mar 05, 2019 11:30 am

Hi All,
Greets,
Sir(s),
The same problem : A36D , 8086 not working on win 7 SP1 x64 on my friends laptop. I would like to take lead in this matter. May i have modded test drivers for the cause ? May I have win 10 generic driver .inf & .sys file ?

Thanks & Regards. ...

reply

#1994 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Mar 05, 2019 12:12 pm

@Vineet Garg:
Welcome to the Win-RAID Forum!
Attached are the requested USB 3.0/3.1 drivers for testing purposes.
Good luck!
Dieter (alias Fernando)

Fernando has attached files to this post

reply

#1995 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Wed Mar 06, 2019 10:09 am

Hi Sir,
Thanks for the quick response & help. It can take some time to report anything.

Thanks & Regards. ...

reply

[Request] NVMe BIOS mod for MSI X79A-GD45 (8D) � � VIA VL80x USB 3 PCI-E Firmware Utility (Code 10 error)

Page 133 of 174 � Page 1 ... 128 129 130 131 132 133 134 135 136 137 ... 174 Page �

Please enter a reason for warning.