Forum - RE: USB 3.0/3.1 Drivers (original and modded)

#1921 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 25, 2019 12:32 am

@Omicron:
Can you give me the link to the Intel Thunderbolt driver v17.2.70.3?

@GeluD:
Welcome to the Win-RAID Forum!
Please post the HardwareIDs of your on-board USB Controller and the OS you are running.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1922 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 25, 2019 1:01 am (Last edited: Fri Jan 25, 2019 1:04 am)

Zitat von Fernando im Beitrag #1921
@Omicron:
Can you give me the link to the Intel Thunderbolt driver v17.2.70.3?

It's the two you have in your OP, the 3rd driver under the Intel section you have MEGA links for.

I don't have A36D though, so I couldn't personally test them - but some others on here might.

https://mega.nz/#!5NV1AQYT!EmJQkzZ8i9uB2...nf-aQREhLegHPfw
https://mega.nz/#!IFUzXKxC!sUz-MGTcFMbJB...CoFo1gKaRSps5-I

reply

#1923 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 25, 2019 8:27 am

The OS is Windows 7 x64 and this is HardwareIDs. I need windows 7 on this PC

PCI\VEN_8086&DEV_A36D&SUBSYS_50071458&REV_10
PCI\VEN_8086&DEV_A36D&SUBSYS_50071458
PCI\VEN_8086&DEV_A36D&CC_0C0330
PCI\VEN_8086&DEV_A36D&CC_0C03

reply

#1924 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 25, 2019 12:23 pm

@sonsuzaxx @GeluD @Eggbert43 @soyours
Following the idea of our Forum member Omicron (look >here<), I have tried to build mod+signed "pure" 32/64bit Intel USB 3.1 drivers v17.2.70.3 for Win7, which may support DEV_A36D USB 3.1 Controllers.
Interested users may send me a PM and I will give them the requested link to the 32bit or 64bit variant.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1925 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 25, 2019 4:14 pm (Last edited: Fri Jan 25, 2019 4:43 pm)

I have used pure mod+signed "pure" 64bit Intel USB 3.1 drivers v17.2.70.3 for Win7 x64 on gigabyte B360m with no luck. The driver is installing with no errors, but in device manager shows exclamation mark and no USB is alive unfortunatly. Thanks @Fernando for sharing and helping us. PCIex to USB seems to be the only solution for now.

reply

#1926 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 25, 2019 4:52 pm (Last edited: Fri Jan 25, 2019 10:05 pm)

Zitat von GeluD im Beitrag #1925
I have used pure mod+signed "pure" 64bit Intel USB 3.1 drivers v17.2.70.3 for Win7 x64 on gigabyte B360m with no luck. The driver is installing with no errors, but in device manager shows exclamation mark and no USB is alive unfortunatly. Thanks @Fernando for sharing and helping us. PCIex to USB seems to be the only solution for now.

Oh well, worth a shot I guess.

reply

#1927 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun Jan 27, 2019 1:08 pm

Hello! It did not work on Intel Z 390. (A36D) everything is installed but does not define usb!

reply

#1928 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sun Jan 27, 2019 2:04 pm

@KAVOR:
Welcome to the Win-RAID Forum!
Your mentioned Intel USB 3.1 DEV_A36D Controller issue while running Win7 is wellknown and obviously can only be solved by the chipset manufacturer Intel.
Only currently available solution: Installation of Win10.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1929 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Jan 29, 2019 12:43 pm

hi, i have problem with USB driver Dev_a36d on WIN7 - MB Gigabyte H310M S2V rev1.0, i want to change MB to ASUS PRIME H310M-R R2.0 with t his MB should be no problems?

reply

#1930 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Jan 29, 2019 1:25 pm

@jkx:
Welcome to the Win-RAID Forum!
Everything depends on the DeviceID of the on-board Intel USB 3.1 Controller. If it is DEV_A36D, you will have the exactly same problem while running Win7.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1931 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Feb 01, 2019 1:33 am (Last edited: Fri Feb 01, 2019 5:52 am)

Hi all,

I downloaded the Latest modded Intel USB 3.0/3.1 drivers for Z77 and imported the certificate as per instructions but when I ran the DPInst64 as Administrator I got a BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL. No drivers were installed. I tried to change them manually in the device manager and got a BSOD again. What am I doing wrong?

Thanks,

- lfbb

reply

#1932 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Feb 01, 2019 8:51 am

@lfbb:
Such BSOD indicates a device management problem and is not driver specific.
My suggestion: Reboot and retry the USB driver installation.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1933 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Feb 01, 2019 11:18 am

Zitat von Fernando im Beitrag #1924
@sonsuzaxx @GeluD @Eggbert43 @soyours

Dear friend, thank you for your help, but unfortunately these drivers did not start, " the device cannot start (code 10)"

reply

#1934 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Feb 05, 2019 7:17 am

Thanks for that. Though it's not working.
I guess from now on I will just recommend every friend of mine to get Z370 instead of Z390. might pick another x299 or x399 for the future

reply

#1935 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Feb 05, 2019 4:27 pm (Last edited: Tue Feb 05, 2019 6:52 pm)

@RMSMajestic:
Hmm, you know, whether it is /r/thinkpad, overclock.net, MDL, Ebay, Betaarchive, or otherwise, I can always expect to run into the same people somehow.

No, Z390 just isn't going to work at all (or any unsupported xHCI controller,) we've even tried generic MS drivers from Win 8 7850 all the way to the most recent Windows 10. You can still suggest Z390 if they have a PCIe USB card though...
I found something on Windows 7 PostRTM 7700 that *could* have compatible xHCI drivers on it, but never found a single lead on where to find it. Still lost in someone's private collection.

reply

Please enter a reason for warning.