Forum - RE: USB 3.0/3.1 Drivers (original and modded)

#1891 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 1:50 pm

Zitat von danstar im Beitrag #1890
@Fernando, it is DEV_0194.

Since I asked for the HardwareIDs, I would like to know the VendorID as well.
Which driver is the related Controller currently using (right-click onto it > "Properties" > "Driver" > "Driver details")?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1892 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 1:56 pm

Sure thing. Please find it below:
Renesas Electronics USB 3.0 Host Controller.
And it's using driver files:
C/....\system32\DRIVERS\nusb3xhc.sys
C....\system32\nusb3co3.dll

I did install the 64bit version of the mod Renesas drivers on the first page. I don't know why it says system32 in the driver files section. I presume this shouldn't be an issue ?

reply

#1893 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 1:57 pm

Driver version 2.1.39.0

Thanks @Fernando

reply

#1894 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 2:12 pm

Zitat von danstar im Beitrag #1892
I don't know why it says system32 in the driver files section. I presume this shouldn't be an issue ?

No. All Windows Operating Systems store their drivers (=*.sys files) within the Windows\System32\drivers folder, no matter, which architecture (32/64bit) they support.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1895 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 2:36 pm

AH got it. Not sure why this is happening then. I have the second plugged in VGA and it's running fine but goes blank when I use the USB3 - HDMI cable. Just the same xHIC controller host can't output high resolution on the port.

reply

#1896 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 2:43 pm

@danstar:
I suspect, that I cannot help you regarding your display resolution problem. Maybe another Forum member is able to solve your problem.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1897 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 2:53 pm

@Fernando
Ah Alright then. Thanks for your help though

reply

#1898 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Jan 10, 2019 11:49 pm

I'm wondering if someone could help me. I am getting frustrated. I recently did a Windows 10 reinstall and my 3.1 ports no longer recognize any devices but they do supply power. I have an ASUS pro gaming/aura mobo with the latest bios. All ports are activated in the bios. I've installed the asmedia drivers from this thread. Windows says everything is peachy but nothing is recognized. I've been hammering at this on and off for days with no luck.

reply

#1899 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Jan 11, 2019 8:27 am

@schiltzamania
Welcome to the Win-RAID Forum!
Which driver version did you install and how did you do it?
Does the Device Manager show any yellow flags?
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1900 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Jan 14, 2019 5:42 am

I just got a Gigabyte G1.Assassin motherboard. From what I can make out from its specifications, it uses a Renesas D720200 USB 3.0 chip paired with two VIA VL810 hubs. The Renesas drivers provided here obviously didn't work for the VIA hubs. I eventually installed the Renesas drivers from the Gigabyte site, even though they're version 2.0.30.0 dated November 19, 2010 (as opposed to version 2.1.39.0 from August 21, 2012 offered here).

The drivers from the Gigabyte site seem to have the VIA hubs branded as Renesas, and contain an additional co-installer DLL. These drivers are working fine, but maybe I can try installing a combination of the Renesas and the VIA drivers offered here.

reply

#1901 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Jan 14, 2019 9:31 pm

PCI\VEN_8086&DEV_A36D&SUBSYS_7B331462&REV_10
PCI\VEN_8086&DEV_A36D&SUBSYS_7B331462
PCI\VEN_8086&DEV_A36D&CC_0C0330
PCI\VEN_8086&DEV_A36D&CC_0C03

MSI h310m pro vd mainboard help me pls windows 7 x64 driver

reply

#1902 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Jan 14, 2019 11:13 pm

@sonsuzaxx:
Welcome to the Win-RAID Forum!
Since the driver itself (= *.sys file) has to be modified, only the manufacturer of your mainboard can help you.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1903 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Jan 14, 2019 11:33 pm (Last edited: Mon Jan 14, 2019 11:39 pm)

Zitat von Fernando im Beitrag #1902
Since the driver itself (= *.sys file) has to be modified, only the manufacturer of your mainboard can help you.

MSI h310m pro vd I couldn't find the right driver. I know the subject How do the keyboard and mouse work?
just that's enough

reply

#1904 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Jan 14, 2019 11:40 pm (Last edited: Tue Jan 15, 2019 9:10 am)

@sonsuzaxx:
Not the Win-RAID Forum, but the mainboard manufacturer is responsable for the delivery of matching USB drivers.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1905 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Jan 15, 2019 1:58 am (Last edited: Tue Jan 15, 2019 9:11 am)

Zitat von sonsuzaxx im Beitrag #1901
MSI h310m pro vd mainboard help me pls windows 7 x64 driver

Sorry, you're out of luck. You got a Cannonlake A36D USB controller on your board (as you got a regular H310 board, not a H310C with the Kaby Lake PCH.) Look back here a few pages, no one has a Win 7 A36D driver.

reply

Please enter a reason for warning.