Forum - RE: USB 3.0/3.1 Drivers (original and modded)

#1846 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 10, 2018 2:08 am

@AbsolutelyZero:
1. When the manufacturer of a specific Controller is not able or willing to develop and release an appropriate driver for it, why should Microsoft not develop and offer a generic driver, which supports this Controller (and all others as well)?
2. Generic drivers are available for several Controllers (e.g. MS's generic AHCI and USB 3.0 drivers, Intel's and OpenFabrics Alliance's generic NVMe drivers).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1847 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 10, 2018 7:37 pm (Last edited: Mon Dec 17, 2018 10:01 am)

Zitat von Fernando im Beitrag #1846
When the manufacturer of a specific Controller is not able or willing to develop and release an appropriate driver for it, why should Microsoft not develop and offer a generic driver, which supports this Controller (and all others as well)?

Because M$ needs to know the hardware's specifics/properties, in order to develop a driver for it (at least, I assume so) - for that, they need information/advise from Intel...

By the way, I picked up this statement from another forum:Z390 USB drivers for Windows 7

Zitat
z390 USB host driver is open source and can be ported easily.
the problem is to get signature to not disable windows protection

I hope, this could be useful for you...
Az

reply

#1848 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Dec 14, 2018 12:41 pm

Looks like Intel has just released some specifics for 300 series chipsets in this datasheet:

https://www.intel.com/content/www/us/en/products/docs/chipsets/300-series-chipset-pch-datasheet-vol-1.html

reply

#1849 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Fri Dec 14, 2018 7:07 pm

@oo7:
Welcome to the Win-RAID Forum and thanks for the info!
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1850 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 17, 2018 8:30 am (Last edited: Mon Dec 17, 2018 8:34 am)

Hi,Fernando,do you have the drivers for win7 32bit?

for this driver "Universal 64bit Intel USB 3.0+3.1 Drivers v5.0.4.43 mod+signed by Fernando with DPInst option.rar "

reply

#1851 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 17, 2018 10:46 am (Last edited: Mon Dec 17, 2018 10:58 am)

Zitat von AbsoluteZero im Beitrag #1847
Zitat
z390 USB host driver is open source and can be ported easily.
the problem is to get signature to not disable windows protection

Fake. No one manufacturer has published a source codes for usb controllers at win platfrom.
MS created driver for win8+ based on usb 3.0 specification, but with vendor "quirks" (see linux usb3 sources), 3.1 is compatible with 3.0, so generic driver works with 3.1 too, but maybe not optimal

reply

#1852 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 17, 2018 10:57 am

@Eggbert43:

Zitat von Eggbert43 im Beitrag #1840
Hi Fernando, I am urgently requiring a driver for PCI\VEN_8086&DEV_A36D&SUBSYS_86941043&REV_10 on Windows 7 x64....

As requested I have attached the demanded driver instantly, but haven't yet gotten any feedback from your side. That is not fair!
Did the drivers work for you?

@soyours:
Welcome to the Win-RAID Forum!

Zitat von soyours im Beitrag #1850
Hi,Fernando,do you have the drivers for win7 32bit?

Yes, I have them.
Unfortunately I haven't yet gotten any feedback from Eggbert43 (see above). So I am rather unsure, whether my "universally" mod+signed drivers will work with your system.
What is the reason for your demand? Which are the HardwareIDs of your on-board Intel USB 3.0/3.1 Controller?
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1853 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 17, 2018 12:21 pm

HARDware ID PCI\VEN_8086&DEV_A36D&SUBSYS_313317AA&REV_10 ，i have to install win7 32bit system

reply

#1854 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 17, 2018 2:20 pm (Last edited: Wed Dec 19, 2018 12:31 pm)

@soyours:
Attached is the requested 32bit Intel USB 3.0/3.1 driverpack.
Don't forget to give us a feedback regarding the result you got with these drivers.

EDIT by Fernando: The attached driverpack has been removed by me, because it didn't work.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1855 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 17, 2018 4:20 pm (Last edited: Mon Dec 17, 2018 4:20 pm)

Zitat von Fernando im Beitrag #1854
Don't forget to give us a feedback regarding the result you got with these drivers.

Original intel's usb3 driver(at least 5.0.4.43) hardcoded to "know" DEV_ID, so DEV=A63D and any "unknow" driver will eject
feedback is simple - "device can't start, code xx"

reply

#1856 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Dec 18, 2018 3:30 am (Last edited: Tue Dec 18, 2018 12:02 pm)

Zitat von Fernando im Beitrag #1854
@soyours:
Attached is the requested 32bit Intel USB 3.0/3.1 driverpack.
Don't forget to give us a feedback regarding the result you got with these drivers.

I try to install it ,bu it dosen't work ,code 10...anyway,thanks...

reply

#1857 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Dec 18, 2018 4:41 am (Last edited: Tue Dec 18, 2018 4:41 am)

Hello everyone,sorry guys but i'm having issues understanding which driver suits my motherboard, i have an MSI H170 Gaming M3, should be intel and i'm stuck with the Windows 10 default drivers which is causing some compatiblity issues with some pheripherials.
Can someone kindly tell me which drivers should i install?
thank you.
Also great job @Fernando

reply

#1858 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Dec 18, 2018 12:23 pm

@soyours:
Thanks for feedback.
It is a pity, that this specific problem cannot be solved by simply adding the missing HardwareIDs into the related *.INF file(s).
As you can read within >this< statement written Mov AX, 0xDEAD, it is the driver itself (= *.SYS file), which has to be customized. My knowledge is not adequate for doing that.

@creature:
Welcome to the Win-RAID Forum!
If you are not satisfied with the generic Win10 in-box MS USB 3.0 drivers, I recommend to install the mod+signed variant of the "pure" 32/64bit Intel USB 3.0/3.1 Drivers v5.0.4.43, which are available within the start post of this thread.
Don't forget to import the Win-RAID CA Certificate, before you are going to install the 3 drivers (for the Controller, Hub and Switch devices).
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1859 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Dec 18, 2018 2:08 pm

Dear comrades, perhaps you will have some advice. We have installed Windows 7 x64 on Lenovo m720q, it is based on b360 chipset, I can't find a compatible driver for VEN_8086&DEV_A36D USB controller (from the fact that I tried to install Universal mod by Fernando also Intel 5.0.4 drivers.43_v2 (5.17 years) and earlier versions 5.0.0.32 and 5.0.3.42) all time error "this device cannot Start. (Code 10)"

reply

#1860 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Tue Dec 18, 2018 3:48 pm

@iwinstoni:
Welcome to the Win-RAID Forum!
As you can read within >this< post, your specific problem cannot be solves by us.
My advice: Ask Lenovo and/or Intel for working drivers, which do support Windows 7 and your specific on-board Intel USB 3.1 Controller.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.