Forum - RE: USB 3.0/3.1 Drivers (original and modded)

#1831 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Dec 01, 2018 2:02 pm

Zitat von pipes80 im Beitrag #1830
all driver in the package have same date or wrong?

Yes. About which driver package are you talking?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1832 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Dec 01, 2018 2:12 pm

Hi,

I have tried downloading few .rar files from 1st post but on every of them I get following error when I try to open/unpack the archive. What's wrong?
"Archive has wrong format or is damaged"

reply

#1833 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Dec 01, 2018 3:38 pm (Last edited: Sat Dec 29, 2018 1:56 pm)

I have an Msi z77ag45 and i installed freshly the Intel USB 3.0 Drivers v1.0.10.255 for DEV_1E31 USB 3,0 Controllers (originally dated 09/17/2013 and usable with Win7/8/8.1/10) in windows 10 1809. The driver works great with no problems.(i had problem with MSI Fastboot with the modded 5.0.4.43 drivers but these work great!). @Fernando Just a question: In device manager the devices updated to 1.0.10.255 are PCI Express Root Complex to Pci Bus , Intel(r) Usb 3.0 extensible host controller , Intel(r) Usb 3.0 Root Hub and last Usb 2.0 Hub. Why the usb 2.0 Hub has been updated with these usb 3 drivers? Should i uninstall them for this device? Thanks

Edit:
I have a usb 2.0 hub 7port connected to the usb3.0 port so i suppose that's why it installed the 1.0.10.255 drivers?

EDIT by Fernando: Inserted picture resized (can be enlarged by clicking onto it) and attached by using the Forum software

PC : Mobo: Gigabyte Aorus b450m, GPU: XFX RX580 8GB , CPU : Ryzen 3700x , RAM :32 DDR4 3200mhz

reply

#1834 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Dec 01, 2018 5:07 pm

@mattbigblue:
Welcome to the Win-RAID Forum!
You should update your used WinRAR version. Required is any v5 platform version (latest is v5.61). These newest WinRAR versions are using a better compression method, which cannot be handled by the old v4 platform WinRAR versions.
Regards
Dieter (alias Fernando)

@ektorasdj
Thanks for your feedback!

Zitat von ektorasdj im Beitrag #1833
Why the usb 2.0 Hub has been updated with these usb 3 drivers?

That does the "Switch Driver", which is part of all Intel USB 3.0 driverpacks.

Zitat von ektorasdj im Beitrag #1833
Should i uninstall them for this device?

No. As long as everything is working fine, don't touch the currently running USB drivers.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1835 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 03, 2018 1:30 am (Last edited: Mon Dec 03, 2018 1:37 am)

Zitat von JoeyImage im Beitrag #1824
I'm having the following issue, and there is a LOT of pages in this thread to go through, so forgive me if this has already been answered. I have a ROG MAXIMUS IX FORMULA mobo, which has a USB-C port on the back. I have a USB-C hub (https://www.amazon.com/gp/product/B07FKT...0?ie=UTF8&psc=1) which, when I connect it does make the Windows sound so I know it detects the hub, however plugging anything into the hub doesn't work. I'm not sure what drivers I may need to install or what I need to tweak to get the hub working. I've Googled, and have seen a lot of people having this same issue, but cannot seem to get this working. The last thing I tried was installing the ASMedia USB 3.0+3.1 Drivers & Software Set v1.16.54.1 WHQL driver and it still does not work, beyond Windows recognizing that it has been plugged in. ANY help or ideas would be greatly appreciated.

Anyone...?

reply

#1836 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 03, 2018 1:39 am

@JoeyImage:
Welcome to the Win-RAID Forum!
I am sorry, but I do not know how to help you.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1837 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 03, 2018 1:50 am (Last edited: Mon Dec 03, 2018 11:50 pm)

Zitat von Fernando im Beitrag #1836
I am sorry, but I do not know how to help you.

Ok then. Thanks! I�ll look elsewhere.

reply

#1838 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 03, 2018 11:39 pm

@Fernando
in this: Intel USB 3.0/3.1 Drivers & Software Set v5.0.4.43_v2 WHQL for Win7<

CASE: enermax Fulmo GT PS: Seasonic 1200 platinum MB: MSI Z490 Unify CPU: I7-10700KF COOLING: EK Supremacy evo full nikel VGA: Galax GTX 1080 ti oc lab edition RAM: Patriot Viper steel 16GB 4000Mhz CL19 HD: Samsung 970 pro (Debian Sid); Samsung sm951 (WIn 10 pro)seagate 1TB MASTERIZZATORE: pioneer 216D MONITOR: Samsung P2770HD S.O: Debian Sid; Win 10 pro 64 bit

reply

#1839 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 03, 2018 11:52 pm

@pipes80:
All drivers of the named Intel USB 3.0/3.1 Drivers & Software Set are dated 05/11/2017.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1840 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Dec 06, 2018 7:24 am (Last edited: Thu Dec 06, 2018 12:39 pm)

Hi Fernando,
I am urgently requiring a driver for PCI\VEN_8086&DEV_A36D&SUBSYS_86941043&REV_10 on Windows 7 x64....
If you could share with me too, I may as well try installing it manually etc

Thanks

reply

#1841 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Thu Dec 06, 2018 12:49 pm (Last edited: Wed Dec 19, 2018 12:31 pm)

@Eggbert43:
Welcome to the Win-RAID Forum!

Zitat von Eggbert43 im Beitrag #1840
I am urgently requiring a driver for PCI\VEN_8086&DEV_A36D&SUBSYS_86941043&REV_10 on Windows 7 x64....

Some people may urgently need a doctor, but nobody needs urgently a driver for his USB Controller.
By the way: I do urgently need more time for my family and my friends....

Attached is a test version of the requested 64bit Intel USB 3.0 drivers, but I doubt, that they will work with your specific system.

Regards
Dieter (alias Fernando)

EDIT by Fernando: The attached driverpack has been removed by me, because it didn't work.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1842 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Sat Dec 08, 2018 3:44 am (Last edited: Sat Dec 08, 2018 3:46 am)

Just want to provide some feedback about the modded Intel USB 3.0 Drivers v1.0.10.255 for windows 10 for DEV_1E31 USB 3,0 Controllers .
I have a f710 logitech controller that has a known bug with windows 10: It loses the xbox360 driver sometimes after shutdown leaving two options 1. disconnect - reconnect 2. manually installing the xbox driver from device manager.
It has probably something to do with the windows 10 usb drivers because on windows 7 it doesnt happen.
Now for the good news : I have for several days the f710 connected to a usb 3.0 port with the mentioned usb 3 drivers and for some reason the problem is solved!!!
I just wanted to write here for anyone having the same controller to try this solution (and to validate at least for me that the drivers are working great !).
All my thanks to @Fernando for providing this driver pack!!!

PC : Mobo: Gigabyte Aorus b450m, GPU: XFX RX580 8GB , CPU : Ryzen 3700x , RAM :32 DDR4 3200mhz

reply

#1843 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 10, 2018 12:04 am (Last edited: Mon Dec 10, 2018 12:29 am)

Zitat von Fernando im Beitrag #1761
According to the feedback I got only Intel will be able to solve the problems with unsupported Intel USB 3.1 Controllers.
It is obviously not enough to add the missing HardwareIDs into the related INF file.
If you want to test the mod+signed driver, please send me a PM.

Whose driver's INF file are we talking about? I'm just a few days into the Win7 + Z390 problem, but as far as I read so far, no driver for the Z390 USB 3.1-Controller exists at all - but Win10 runs fine on Z390 motherboards, so it must have some sort of inbox MS or generic driver already included (otherwise, Win10 wouldn't work either on Z390 chipsets - the new USB 3.1-Controller obviously needs some form of driver in order to run...). But, so far I know until now, there does not exist any publicly available driver for this controller - even for W10! So, W10 must be provided with a working driver already included! Is this correct?

The first question I have is: would this OOTB driver (provided with W10) truly be a generic or MS specific driver? I ask this, because the hardware it is supposed to work for is Intel hardware and Intel hardware only...

Zitat von Fernando im Beitrag #1841
Some people may urgently need a doctor, but nobody needs urgently a driver for his USB Controller.
By the way: I do urgently need more time for my family and my friends....

You're doing very good - and yes, don't hesitate to spend more time for Yourself and your loved ones

AZ

reply

#1844 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 10, 2018 12:40 am

Zitat von AbsoluteZero im Beitrag #1843
Whose driver's INF file are we talking about?

The discussion was about the INF files of the latest Intel USB3.0/3.1 drivers and the question was, whether the addition of the missing HardwareIDs would be enough to get the Z390 USB 3.1 Controller supported. The answer was: No.

Zitat von AbsoluteZero im Beitrag #1843
But, so far I know until now, there does not exist any publicly available driver for this controller - even for W10! So, W10 must be provided with a working driver already included! Is this correct?

Yes!

Zitat von AbsoluteZero im Beitrag #1843
The first question I have is: would this OOTB driver (provided with W10) truly be a generic or MS specific driver?

Yes, the MS USB 3.0/3.1 drivers are generic ones, which support all USB 3.0 and USB 3.1 Controllers (no matter who is the manufacturer of the Controller) and the related Hub devices.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1845 | RE: USB 3.0/3.1 Drivers (original and modded) datum

Mon Dec 10, 2018 1:52 am (Last edited: Mon Dec 10, 2018 1:56 am)

Zitat von Fernando im Beitrag #1844
Yes!

So, if Intel hasn't developed any driver for it's own new controller - how can M$ possess a working driver for Intel hardware!? The hardware is Intel's property and M$ cannot know the specifics of it's functioning without consulting Intel...

Zitat von Fernando im Beitrag #1844
Yes, the MS USB 3.0/3.1 drivers are generic ones, which support all USB 3.0 and USB 3.1 Controllers (no matter who is the manufacturer of the Controller) and the related Hub devices.

If that's so, then those generic drivers should also exist for other OS'es - Mac, Linux, etc. (because not everyone uses Windows and Z390 has to work on other platforms, too...)

reply

Please enter a reason for warning.