@Fernando
I want to know if it is possible to install a modded 8-Series or up driver to a 7-Series mobo?
As in this reply (USB 3.0/3.1 Drivers (original and modded)), it seems that it can be done.
And from this reply (USB 3.0/3.1 Drivers (original and modded)), the controller seems to be basically the same after generations of chipsets.

I am not sure about this as the replies seemed that they can do this but you didn't mention anything about this (or I missed it?) in the infos.

Hi Dieter

I am running win10 .402 as of yesterday but have been having Sleep issues with the Intel X99 MB USB for a while, so I decided to try the Intel USB3 drivers here and although your Certificate Imports fine ( success reported ) Win10 will not boot due to an unsigned Driver , so I hit F8 and the 7 to disable Cert. signing and win10 will boot just fine and the Drivers are installed as seen in Device Manager with your Cert., I have tried several ways with the same issue , and have used your modded RST Drivers previously without issue too, so I am not certain if win10 is doing something different/new , or I am somehow doing someting wrong?

I even tried the new method for importing the Certificate since 1703 and also installing all three Drivers manually instead of using DPinst. and still the same issue , with the Cert. no being accepted.

thanks for your Help.

@Kbird
It does seem i had observed, few months ago, the same kind (driver certification issue) on my W10 x64 x99 Sabertooth system.
The workaround I have found was to try booting one times in "mode sans echec", and then after the problem does disaspear.
I think W10 is no 'perfect'..

Zitat von 100PIER im Beitrag #1565

---

@Kbird
It does seem i had observed, few months ago, the same kind (driver certification issue) on my W10 x64 x99 Sabertooth system.
The workaround I have found was to try booting one times in "mode sans echec", and then after the problem does disaspear.
I think W10 is no 'perfect'..

---

Zitat von Fernando im Beitrag #1564

---

Questions:
1. Are all 3 Intel USB 3.0 drivers affected or just the Controller one?
2. Which DeviceID has your on-board Intel USB 3.0 Controller?

---

@Kbird
Currently i do use the native MS USB 3.0 drivers because I get no problem.
I do run W10 build .402

in bios menu i have let all the USB default values intact.

Why you don't use the MS native USB 3.x driver ?

On my mboard I have only Intel USB 3.0 ports, no Intel USB 3.1 ports.
The USB 3.1 ports are all handled by a specific ASMedia chipset.
yes, when i had done tests with Intel drivers the 2 MTT drivers did appear to handle USB 2.0 Intel ports.

As I was not happy with Intel driver USB 3.x drivers I decided to use the native MS 'in the box' drivers.

With the In-built MS Drivers , I lose my wireless Logitech Mouse if the computer goes to sleep , and sometimes it takes a day or two for the System to find it again. Also my MediaSonic USB3 MediaServer ( 4x 2TB HDD ) does not Sleep/restart properly , so I thought I would try the Intel drivers to see if things work differently. I let the system Sleep overnight and the logitech mouse still works which is a nice change :) but maybe just a coincidence? the MediaServer did not sleep when the System Slept last night though.

Everything appears to be working just fine with the Drivers , it is only the Certificate issue at the moment that is a problem , I have not had issues before with the WinRaid Cert. eg with the IRST Drivers.

Thanks for the Reply.

KB

@Kbird
do you have tested the "Save Mode" booting once times only and then go back to Normal mode and see if W10 does boot without driver signature problem ?

Zitat von 100PIER im Beitrag #1571

---

@Kbird
do you have tested the "Save Mode" booting once times only and then go back to Normal mode and see if W10 does boot without driver signature problem ?

---

Dear Fernando,

I'm not able to install the Intel modded drivers for Intel Chipsets from 8-series up, which I understand are the right ones for my Asrock B250M-HDV motherboard running Windows 10 Home 64bit. The current drivers are:

Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft)
Version 10.0.16299.251, Date 21/02/2018

USB Root Hub (USB 3.0)
Version 10.0.16299.334, Date 12/03/2018

Hardware IDs:
PCI\VEN_8086&DEV_A2AF&SUBSYS_A2AF1849&REV_00
PCI\VEN_8086&DEV_A2AF&SUBSYS_A2AF1849
PCI\VEN_8086&DEV_A2AF&CC_0C0330
PCI\VEN_8086&DEV_A2AF&CC_0C03

When I try to update, I get the message "Windows encountered a problem installing the drivers for your device - A problem was encountered while attempting to add the driver to the store". I tried rebooting in case it had installed anyway but it hadn't. Can you help?

Many thanks in advance,

Cabirio

Apologies Fernando, I hadn't installed the Win-Raid certificate. All is working now and transfer speeds are what they should be.

Cheers,

Cabirio