Thanks a lot for the work!

Not a big thing, but I had to search a moment until I recognized that the heading was the link to the repository. Could it be more intuitive to include the several items in the same link or have just the items itself as link?

G. Intel USB Type C Physical (PHY) Firmware Repositories

• PHY P TGP
• PHY P CMP
• PHY S LKF

Hi, a very impressive job. Can you explain me which file should I use?
Exactly the same as shown by ME Analyzer. In my case: 11.0.0.1202_CON_H_D_PRD_RGN.bin, right?
Is Major.Minor version must be the same or Major is enough.

Can I use in my case: 11.0.26.3000_CON_H_D_PRD_RGN.bin or 11.8.86.3909_CON_H_DA_PRD_RGN.bin.
I would be grateful for an explanation.

An MSI GT83 laptop?
Is that the latest bios available, that used in ME Analyser?
U should check it because it could be that a more recent bios version already have another Minor version instead of the 11.0
Upgrade to latest bios then u can check again the minor/hotfix/build

I do see for example that the GT83VR 6RF has recent bios and recent ME FW releases 2017/2018

Then u can use a more recent FW image greater than 11.0 (11.1/2/3/4/5/6/7/8)
If the oem already has a bios with 11.8 for ex., then u can use the latest 11.8.86.3909.

EDIT: Explain that a bit more... i dont have or know that laptop/hw...
Is this dump the current on the motherboard? U changed motherboard... and that dump is from where?
U changed the PCH... but the base board and spi is the same... who soldered/repaired the mainboard?
U want to clean the ME, than use same major/minor version with that dump, good luck.

Hi, thanks for the quick reply. Yes, this is the GT83VR. I changed the SR2CE (GL82CM236) bridge and now it boots with a black screen. I don't know what the bios version is. I grabbed the dump and checked ME Analyzer. Thought I'd clean the ME and it might work.

I need CSME 12.0 repository r31 but download link got erro. Can everyone help to fix this link ?