Okay so this area? Thank you for your help by the way! I just want to verify the variables I am changing as to not make a mistake. Can you verify

@cjacobs
You can scroll down. The address of the variable you selected is highlighted in the upper left square.

Yes I do see that but for example the 0x6DD I can only get it to read in the upper left as 006D and the 0x17 as 0017 Is that still correct?

Hi friend, as said Sweet Kitten, you have to use the keybard's key to scroll the offsets ...
Look here for the guide to use RU shell :

https://nstarke.github.io/0037-modifying...ing-ru-efi.html

http://ruexe.blogspot.com/2020/05/ru-5250379-beta.html

http://ruexe.blogspot.com/2020/05/tutori...ind-string.html

https://www.basicinputoutput.com/2017/09/ru.html

https://homanhuang.medium.com/how-to-hac...ck-412d7128d0e3

http://shutdown2110.blogspot.com/2017/06/ruexe_21.html

Let me know
Regards

Thank you! i think there might be a language barrier. I do know how to navigate and find the appropriate guid i am just asking for verification of the offsets before i hard write them just to be sure they are correct! As to not break anything lol. Is 0017 and 006D correct in this graphic? Or maybe you can circle just to verify? I appreciate your feedback thanks guys

Here is the Bios image to unlock ----------------------------------------Here is the PchSetup 0x17 >> 0x01 to 0x00




Here is the Bios image unlocked------------------------------------------Here is the PchSetup 0x06DD >> 0x01 to 0x00



As You can see the 0x0017 has offset 0x0010 horizontal and 0x007 vertical and the 0x06DD has 0x06D0 horizontal and 0x000D vertical ...
So you cannot make wrong ;)
Let me know
Regards

P.S. you have to get same image like these ... to change the values

Thank you BD Master! I am forever thankful. I changed the 0x17 easily. But for 0x06DD it does not show the same in RU. It does not show 06D0 horizontal under PchSetup! If you'll refer to my attached image earlier. Is this different for me? I can only match up 006D Not 006DD

Ok friend, it seems that FPRR 0x06DD variable is set to 0x00 by default, so use this tool run it as Admin and upload the result file :

https://www.mediafire.com/file/flr80ru40...ols20i2.7z/file

It the result will show the bypass write eeprom , i will prepare the bios mod on it !
Let me know
Regards

Here are the results! Let me know how it looks! Thank you! *BIOS FILE*

Yes friend, you can flash it , here you go :

https://www.mediafire.com/file/6c4gsvmi6...03_Mod.rar/file

let me know
Regards

P.S. after the mod please post a Bios Menu Tabs Photo to check it ...

Yes kind sir! That went smoothly! Thank you so much. Let me know if there's any way I can repay you. I appreciate your help :)

You are welcome my friend, pray for me and my soul !
Regads