Thanks. I just want to know if I can replace ISA with PCI ROM but obvious can't.

@Horus - it may be possible, but I would only try if you have means of recovery (flash programmer), I have not tried it only steered away from that once I noticed it while trying to make the same move you are now.
I think last time I looked I found one person say it failed, but they may have not been doing the BIOS mod correctly, or may have chickened out and didn't try etc, never know what really happened as much info was not given.

is there a change log for new rste modules?

guys how to install?

Zitat von triodak im Beitrag #150

---

This may be quite old stuff but maybe it is worth to mention about it ;)

There are motherboards that use Silicon Image SATA/RAID chips. As an example is Asus P5AD2-E Premium board with "SiI 3114 SATARaid SiI 3114 SATALink BIOS Version 5.0.39" in the most up to date BIOS http://dlcdnet.asus.com/pub/ASUS/mb/sock...um/1006-006.zip
I do not know if all and in what motherboards those chips were used but BINs for motherboards are available :)

Silicon Image does provide newer BINs for some controllers:

SiI3114 - PCI to 4 Port SATA150 -> SiI 3114 SATARaid SiI 3114 SATALink
http://www.siliconimage.com/docs/BIO-003114-x10_5403.zip file: 5403.bin ver.5.4.03 09-22-2006
http://www.siliconimage.com/docs/BIO-003114-x00_5073.zip file: 5073.bin ver.5.0.73 09-22-2006

SiI3124 - PCI/PCI-X to 4 Port SATA300 -> SiI 3124 SATARaid SiI 3124 SATALink
http://www.siliconimage.com/docs/SiI3124__6600.zip file: 6600.bin ver.6.6.00 06-23-2008
http://www.siliconimage.com/docs/3124_6409.zip file: 6409.bin ver.6.4.09 01-02-2007

SiI3112 - PCI to 2 Port SATA150 -> SiI 3112A SATARaid SiI 3112A SATALink
http://www.siliconimage.com/docs/SiI3112_4402all.zip file: 4402.bin ver.4.4.02 10-30-2008

SiI3132 - PCI Express (1x) to 2 Port SATA300 -> SiI 3132 SATARaid SiI 3132 SATALink
http://www.siliconimage.com/docs/SiI3132_BIOS_7703.zip file: 7703.bin ver.7.7.03 07-01-2009

SiI3512 - PCI to 2 Port SATA150 -> SiI 3512A SATARaid SiI 3512A SATALink
http://www.siliconimage.com/docs/BIOS-003512-xxx-4384.zip file: 4384.bin ver.4.3.84 01-19-2007

SiI3531 - PCI Express (1x) to 1 Port SATA300 -> SiI 3531 SATARaid SiI 3531 SATALink
http://www.siliconimage.com/docs/SiI3531_9100.bin ver.9.1.00 08-01-2008

For each chip there are also older BINs than in those links. Just need to pick up proper product from Silicon site: http://www.siliconimage.com/support/ and download/add to site.
Ofcourse each chip have relevant driver witch may be added to Recommended AHCI/RAID and NVMe Drivers

---

@Silicon Boy
On my side I do use under W10 x64 a PCIe x4 SATA Link add in card from Silicon Image to offer a eSATA port.
Here are the sreenshots to provide DeviceINFO, Driver info and on board Flash BIOS info.

I believe the original F10b bios from the gigabyte z97x sli came with the rom module v13.x. Back when UBU shipped some, I updated it to I think v15.x
Can I update it to the latest (v17) that's available in OP?

Hi Guys.
Have a GA-P67A-UD3P-B3 motherboard with F9 bios. Old but not obsolete, lol. Got on sale some bigger than in use SSD's and want to make RAID0, but question in TRIM.
Found in this thread post with modified (TRIM in RAID0) and working ok bios for very similar mb - GA-P67A-UD3-B3, but original bios files from gigabyte site are very different. Try to flash it? Also, found howto-manual for update uefi bios, but there is no official uefi for my mb.
Plz, help with this ancient hardware.