Hi Fernando and all expert guys!!
here is the case:

CPU
Intel Xeon e5450
intel Xeon e5482
intel Xeon e5492 > considering it in future if all works Smile

mem
Type DDR3
Size 4096 MBytes
Manufacturer Hyundai Electronics
Max Bandwidth PC3-12800 (800 MHz)
Part Number HMT351U6EFR8C-PB

mobo
Manufacturer Gigabyte Technology Co. Ltd.
Model GA-EP45T-UD3LR (Socket 775) Rev 1.3
Chipset Vendor Intel
Chipset Model P45/P43/G45/G43
Chipset Revision A3
Southbridge Vendor Intel
Southbridge Model 82801JR (ICH10R)
Southbridge Revision 00

Storage
Hard drives
Intel Raid 5 Volume SCSI Disk Device
Manufacturer Intel
Interface RAID
Capacity 1863 GB
Real size 2,000,405,135,360 bytes
RAID Type Software RAID


Intel Raid 5 Volume SCSI Disk Device
Manufacturer Intel
Interface RAID
Capacity 931 GB
Real size 1,000,205,189,120 bytes
RAID Type Software RAID

hardware ids for my " Software Raid" are:
PCI\VEN_8086&DEV_2822&SUBSYS_B0001458&REV_00
PCI\VEN_8086&DEV_2822&SUBSYS_B0001458
PCI\VEN_8086&DEV_2822&CC_010400
PCI\VEN_8086&DEV_2822&CC_0104

Win 10 pro driver from MS:

Thank you Fernando a million.

What to do if I do not like to setup windows again?

Is there any good standard how to manage such a situation?

Downgrade drivers... can be a bit scary with this all mess pending in Microsoft...

I take your advice and go for it in full... this is not a gaming machine, nah, maybe sometimes :) so please do the last word before procedures started :)

So no special conditions?
first drivers than flash Bios.. that is the procedure i guess :)) :))

Zitat von Fernando im Beitrag #2

---

RAID ROM modules for all nForce chipsets:

Download links:

• >NVIDIA nVRAID ROM v10.0.0.35 for MCP79 systems without AHCI support< (>MIRROR<)
  Note: This NVIDIA MediaShield RAID ROM has been designed for nForce ION (MCP79) RAID systems, but can be used after a modification of the DeviceID hex code with all nForce chipsets from NF3 up.
  And here are 2 "modded" nVRAID ROM modules v10.0.0.35, which are designed for the use with nForce3-250 resp. nForce4 AMD chipset systems (for details look >here<):
  • a) >Especially modified NVIDIA RAID ROM v10.0.0.35 for NF3-250 systems< (>MIRROR<)
  • b) >Especially modified NVIDIA RAID ROM v10.0.0.35 for NF4 AMD systems< (>MIRROR<)

Important remark:
Users with an nForce3/4 chipset system will only be able to successfully flash a BIOS containing any of these nVRAID ROM modules, if they have made sure, that the correct DeviceID of the related NVIDIA nForce SATA RAID Controller is within the hex code of the nVRAID ROM module. The details are layed down >here<.

---

It will work though, with the proper editing of the DevID. I used the 10.0.0.35 on a NF3 motherboard with SATA RAID and it worked a treat!

ok, there is a guide for edit that?

i have change hex devid code from DE 10 BD 0A to DE 10 6E 03
if is only that it's easy