Zitat von kevindd992002 im Beitrag #1194

---

when I put the files in the Files\Intel\RSTe folder, the UBU tool doesn't work and does not detect these new versions. It only detects them when I put it in the Files\Intel\RST folder. So does my board really have Intel RST or Intel RSTe? I'm really confused.

---

Zitat von pipes80 im Beitrag #1202

---

what's rst orom is good for an ich10r?

---

@kyriacos:
Which is the DeviceID of your on-board JMicron SATA Controller and with which mode is it running (the Option ROM will only be loaded while running in RAID mode).
The flashing method depends on the mainboard.

@kyriacos:
The mainboard BIOS contains only Option ROM modules for their on-board devices, but not for add-on cards.
If you want to update the Firmware of your JMicron add-on card, you will have to flash the updated Firmware into the chip of the add-on card by using a specific Firmware installer.

Zitat von kyriacos im Beitrag #1205

---

I have a JMicron JMB36x controller with ROM v1.07.24.

---

@kyriacos:
As long as you do not create a RAID array by using your JMicron SATA add-on card, you do not need to update the JMicron RAID ROM.

@kyriacos:
1. The JMicron Option ROM modules, which I am offering within the start post of this thread, are only usable with JMicron SATA Controllers, which are running in RAID mode (look at the related chapter title and the names of the Option ROM modules!).
2. JMicron SATA Controllers, which are running in IDE or AHCI mode, don't need an Option ROM.

@ all:
Update of the Start post
Changelog:

• new: Intel RSTe RAID ROM v4.7.0.1017 for DEV_2826 Intel SATA RAID Controllers
Thanks to plutomaniac for the source file.

@PitKoz:
Please update your in-use WinRAR version. After having done that, your problem will be solved.