I was asking about the Marvel rom because I was thinking to move the boot disk to that controller in order to disable AHCI rom from showing, right now it is disabled because I don't use it.
Do you recommend any other RAID rom than the that is modded in the bios for p55 chipset?

Intel RAID SATA 9.5.0.1037 to 12.6.0.1867 (modded ROM by Fernando for TRIM support in RAID0)
Jmicron RAID SATA 1.07.06 to 1.07.28
Realtek LAN 2.35 to 2.56

Zitat von hurdubaiev im Beitrag #632

---

I was asking about the Marvel rom because I was thinking to move the boot disk to that controller in order to disable AHCI rom from showing, right now it is disabled because I don't use it.

---

Felix thanks for the info.
I did not insert that version, someone else did and that's the only modded version of the bios that I found.
I wanted to create a raid 0 array.

hello Fernando.
I have one sony vpcz1 with rom 9.xx intel.
my raid are damaged, and ctrl-I don't work, and H2O bios don't have advanced options to disable Raid.
flashing ROM solve my problem by ctrl I? I need access to raid to delete and create new array.. or not...

thks

Zitat von Fernando im Beitrag #608

---

Zitat von MaKCuMyC im Beitrag #606

---

Can't find 3.1.0.0 and 3.1.2.0. On some boards it's a newest working roms, because 3.2.x.x can't detect any device.

---

I have just added 2 different variants of the AMD AHCI ROM v3.1.0.0 for DEV_4381 and DEV_4391 to the start post, but I am not sure, if they will work for your AMD system (especially the DEV_4381 one).
Which Southbridge has your mainboard and which DeviceID has your AMD SATA Controller?

---

Zitat von Fernando im Beitrag #639

---

@ MaKCuMyC:

Thanks for your feedback.
I would rather like to know
1. the reason why the AMD AHCI ROM v3.2.x.x didn't work for your system and
2. the DeviceID of your on-board AMD SATA AHCI Controller.

---

Fernando,
This is my screen where the system hangs .
Does not exist system is the discs, this correct step. I need format and install windows.

but the SONY blocked the BIOS. If I put the SSD 's (any 1, or 2), block bios F2, appears and not disable the RAID INTEL , dont access with ctrl + i , Not even access the BIOS if the raid has the attached drives . When remove discs, access the bios with f2, change boot to usb, install windows on Caddy and everything works OK.

I tried Connect without disks , and during the windows install boot add disks , but a installation does not detect the raid , even with the intel drivers...

I put the last bios upgrade, but i dont have option for use one disc, 2 discs, nothing...



EDIT by Fernando: Fully quoted unneeded text deleted

Zitat von Fernando im Beitrag #1

---

As I stated above, I would be very grateful, if you would post the link to other interesting or newer AHCI/RAID ROM modules.

Fernando

---

Hi,
Which Raid Rom do you recommend for p55?