those are the only settings that I need to make regarding raid right ? ( 11.2 driver + Rom)





thanks! :)

I am disappointed why old AMD AHCI ROM's gone.
And WTF where is Reply in thread button or reply form?

Can't find 3.1.0.0 and 3.1.2.0. On some boards it's a newest working roms, because 3.2.x.x can't detect any device.

Hi all :)

Sorry, my english is not the best and i hope you can understand me.

Is there no difference between 2822 and 282a Intel OROM?
You say the 12.9.0.2006 OROM is the best choice for a P67 Board and Intel develope the later OROMs for 8/9er chipsets. Where does the information come from?

I have actually run a RAID 1 on OROM v10.8.0.1303. Can i update to 12.9.0.2006 without having fear about the array?

I hope you can help. :-)
Thanks in advance and have a nice day.

---
I have a Asrock P67 Extreme6 and their bios downloads are .exe flasher only. In the past i use the flasher in the bios to save the .rom on a USB stick, but is it possible to extract the .rom from the exe? If so, how?

Hello fernando,

thanks for your answer. Why is there a difference between the marvell 91a0 and 9120, but not between the intel 2822 / 282a? Is the "a" version the mobile part?
Thanks for the link - i will read and test it. :-) Have AMI a downloadlink for AMIUCP online like the firmware update utility stuff?
EDIT: Found AMIUCP 1.07 - is this the latest version?

PS:
Where can i find the infos about the RST versions on the intel page? I am looking for it but i dont find it. :(

You answered faster than I can edit. :o)

Zitat

---

Do you mean the RST driver version (it is always documented by Intel) or the RST ROM module version (Intel has never published them on their sites).

---

I mean the infos about the RST (drivers) in dependence to the chipsets. But i found it now. I must have been blind and dont see the readme. :-X

Btw AMIUCP works great. :-) But the .rom is 8MB - if i save it from the UEFI on a USB stick, is it only 4MB. Is the IntelME Part the difference (8mb with / 4mb without)?

EDIT:

New OROMs flashed. :) But i am realy stupid - flash with instant flash and this made a cmos clear. Did anyone know my dram settings? lol

But if i flash the new bios with the new OROMs, do i dont flash the new OROMs too?
The raid array works fine. Thanks for your help

I have one last questions. I replace the marvell (9120) OROM too. I use the 1.0.0.1030 before and with "bootable" settings in the bios the marvell OROM check for drives:


With the 1.0.0.1038 OROM (downloaded here) the OROM bootscreen is not show anymore, i see only a blinking cursor in the upper left corner. The controller himself works fine. Is this a bug in this rom on a 9120 or did marvell just remove the ROM onscreen check for faster boottimes?

Is it possible that this occurs because it is a modded DEV_9123 version? I flashed a long time ago the 1.0.0.1033 (from dev 9123 too) and have the same "error". Thats the point why i use the old 1.0.0.1030 for a long time. Did you have a version newer than 1.0.0.1030 who is only made for dev_9120?

Zitat

---

If you are unsure, choose the DEFAULT ones.

---

Ivy Bitch oc with mem oc too - settings testet years ago. But i found a old screenshot with the timings i use. :)

Hey hey, have a rather narrow problem to run by you before maybe nuking my rig.

P67 Extreme 4 P1.70, Rapid Storage 10.1.0.1008
Win 7 Home Premium

Bought drives to upgrade my storage RAID 1 from 1.5 to 3GB. The drives are detected and work fine, but RST says there's a 2TB limit because of my venerable old mobo, apparently. Should flashing a module correct this, and if so which would you recommend? Seeking redundancy over speed/efficiency, so trim is not a concern.