Zitat von Fernando im Beitrag #451I decided to add your linked JMB36x RAID ROM v1.0.28.01 into the start post of this thread.
Why 1.0.28.01? This is version 1.0.8.01 and it has been available as part of Ubu as a file jmb363_8.bin. I have not declared, since there were positive reviews. True negative reviews was not there. :)
Zitat von Fernando im Beitrag #451I decided to add your linked JMB36x RAID ROM v1.0.28.01 into the start post of this thread.
Why 1.0.28.01? This is version 1.0.8.01 and it has been available as part of Ubu as a file jmb363_8.bin.
You are absolutely right. Thanks for the info. It was a typo within my last post, which I have now corrected. Regarding the updated start post and the linked JMB RAID ROM modules everything is ok. By the way: 1. Until now I hadn't realized, that the JMB36x RAID ROM v1.0.8.01 was already part of the UBU tool since several weeks. 2. The JMB36x RAID ROM v1.0.8.01 source file is dated 07/12/2012, my JMB36x RAID ROM v1.0.7.28 source file is dated 03/28/2011. Do you think, that we will ever see newer JMB 36x RAID ROM modules?
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
ZitatDo you think, that we will ever see newer JMB 36x RAID ROM modules?
Lately, I've never met these controllers on the motherboard is. I think that most likely, the new versions will not. 2 years have passed from the last version 1.08.01 and nothing new.
Hello Fernando, This Marvell Firmware 2.2.0.1125b is it safe to use for my P8P67 Mobo if I replace it by using MMTools? the file is 9123.bin. while my device id 9130,9120,91a0. Just wondering if it works thanks
Zitat von 9tailsfox im Beitrag #455This Marvell Firmware 2.2.0.1125b is it safe to use for my P8P67 Mobo if I replace it by using MMTools?
The UBU tool is able to update an existing Marvell AHCI/RAID OROM, but not to flash any Firmware like the Marvell one.
Zitatthe file is 9123.bin. while my device id 9130,9120,91a0. Just wondering if it works
Since I never had a mainboard with a Marvell 91xx SATA Controller, I cannot answer your question. Why do you want to update of the Marvell OROM/Firmware/Bootloader at all? Have you created a Marvell RAID array? Do you have any probem with the Marvell SATA ports? If yes, which one?
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Nope. I don't have any problem with my current firmware. just wondering the latest marvell 91xx Firmware 2.2.0.1125b would works for My P8P67LE :-) Thanks
Zitat von 9tailsfox im Beitrag #457just wondering the latest marvell 91xx Firmware 2.2.0.1125b would works for My P8P67LE :-)
It probably does. AFAIK all Marvell 91xx SATA Controllers are using the same Firmware.
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
I have a problem with Intel 330 Series SSD connected to ASUS M5A88-V (AMD RS880P/SB850) motherboard. Sometimes (very rare) the whole system hangs up, so I need to hard-reset it, but then that Intel SSD either stops being detected by the BIOS or becomes REALLY slow (was stuck at Win7 booting logo for >5 minutes with no progress). Those "freezes" happens (I believe) on active disk operations last few times - patching games, copying files from HDD to SSD, even when I reinstalled OS once. The only way to fix this is to reset CMOS (with pin or by removing BIOS battery), connecting SSD to another SATA connector and leaving PC plugged out for at least 10 minutes (maybe this all is just a coincidence, because all those operations don't have 100% results and may take several tries) or else drive is not usable. The funny thing is that this issue concerns only SSD, HDD always works fine.
So, the question is - can AMD AHCI ROM update fix this issue? Or this is just general incompatibility of AMD chipsets and Intel drives (found some similar issues over the web)? P.S. I think I'm running AHCI ROM 3.0.5, but I will read other posts here to find that out.
Zitat von oxygen15 im Beitrag #459can AMD AHCI ROM update fix this issue? Or this is just general incompatibility of AMD chipsets and Intel drives (found some similar issues over the web)?
Although I doubt, that an update of the AMD AHCI OROM will solve your problem, I recommend to do it. You will get a faster booting this way. Questions: 1. Which OS are you running? 2. Which AHCI driver do you use?
Regards Fernando
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
1. Win 7 x64 (with all updates) 2. This happened to me with both "stock" Microsoft driver and latest AMD SATA driver (1.2.1.359), which I'm running now (last "freeze" was ~1 month ago, the one before that in January-February 2014).
P.S. Should I also update 1002:4394, or 1002:4391 is all I need?
@ oxygen15: Thanks for answering my questions. Until now I don't have any idea regarding the reason of your problems. Nevertheless you should test both possible AHCI drivers (generic Win7 AHCI driver and AMD AHCI driver) and then decide, which one gives you more stability.
Zitat von oxygen15 im Beitrag #461Should I also update 1002:4394, or 1002:4391 is all I need?
Since you are running your AMD SATA ports in AHCI mode, an update of the AMD RAID OROM (DEV_4394) is not necessary at all.
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Update went fine, all is working without any issues (at least on the first sight). Will give my response if the issue described above will appear again!
Zitat von MonarchX im Beitrag #464I have P8Z77-V Pro with BIOS 2104 - does it have the latest Intel AHCI ROM 1.20E? How can I check if it does or doesn't?
The Intel SATA AHCI Controllers of actual Intel chipset mainboards (from 5-Series up) do not have and do not need an Intel AHCI ROM module within the BIOS. So you will not find it.
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Was wondering what is the best Intel Raid Rom and driver version pairing for optimum performance and trim? Can not find the page with Fernandos recommendations. Thank you.
Print view
Mon Jul 21, 2014 3:03 am
reply
Win-Raid Forum (Drivers - Firmware - Modding)
»
BIOS Modding
»
BIOS modules (PCI ROM, EFI and others)
»
AHCI & RAID ROM Modules
