By the way, Marvell has also released and EFI Driver for 9192.

Zitat von Fernando im Beitrag #361

---

, why a mainboard manufacturer has put it into a Z97 BIOS.

---

@lordkag
Please help me with the search version. :)
Thank you in advance.

@Fernando

They only updated RST and video, but not quite latest versions. The rest are old versions, that's why I say that 1.0.1.0025 is latest. The only other possibility is that 1.0.1.0025 is bugged, but no one reported that yet.



@SoniX

It is 1.1.0.1005.

Zitat von lordkag im Beitrag #366

---

@ SoniX
It is 1.1.0.1005.

---

@Fernando

Thanks for investigating further! It takes quite a team work to understand something from Marvell's mess. Now I have compared all the versions of 9192 I could grab and I can 90% say that 1.0.1.0025 is the oldest version and 1.0.0.0034 is the newest. The differences between 1.0.1.0025 and 1.0.0.0026 are much smaller than 1.0.0.0026 vs 1.0.0.0027 and 1.0.0.0027 vs 1.0.0.0034, plus it is missing something that I find important (present in all newer modules):



I should have remembered this from the false labeling of Marvell's firmwares, where 2.1.1.1404 is followed by 2.1.2.1408 and then by 2.1.0.1410.

@SoniX

The latest version for 9192 ROM is 1.0.0.0034. If you need 1.0.0.0026 and 1.0.0.0027 for comparison, I can upload them, but I'm almost sure that 1.0.1.0025 is in fact 1.0.0.0025 with a false label.

About EFI drivers I really don't know what to say, considering that this is Marvell. They have different GUID, but this is not the first time this is happening. My guess is that manufacturers only receive the .efi part, then they add GUID, user interface and the rest.

The version 1.1.0.1007 has the label MV9192Dxe, but this could again be just a label Gigabyte has added for clarity, since that board has 9192 controller.

The best way to check this is to find a volunteer with an ASUS Z77-V LE Plus board, replace the EFI/PE32 section of Marvell EFI with the newest 1.1.0.1007 and test in UEFI with CSM disabled.

@lordkag
Thank you very much! :)
I will make adjustments to the UBU.
Best Regards.

@Fernando
>Marvell 91xx AHCI/RAID ROM+BIOS module v1.0.0.0034 for DEV_91a2<

Best Regards!

Zitat von lordkag im Beitrag #369

---

The best way to check this is to find a volunteer with an ASUS Z77-V LE Plus board, replace the EFI/PE32 section of Marvell EFI with the newest 1.1.0.1007 and test in UEFI with CSM disabled.

---

Zitat von SoniX im Beitrag #373

---

Zitat von lordkag im Beitrag #369

---

The best way to check this is to find a volunteer with an ASUS Z77-V LE Plus board, replace the EFI/PE32 section of Marvell EFI with the newest 1.1.0.1007 and test in UEFI with CSM disabled.

---

Checked, it works! :)
..............................

I wanted to ask, you do not understand how to build support from EFI AsMedia 106x?

---

Zitat von lordkag im Beitrag #374

---

Are you saying you found someone with that board and the replacement worked? Did he tested both Marvell ports, run some benchmarks with HDD/SSD connected to that port, all done in pure UEFI?

---

Zitat

---

As for Asmedia 106x, there is no hope. All I could find was some generic DXE drivers, nothing that can be used and nothing important. The 106x chip is old and apparently they don't have anything new for the ordinary consumer, based on a search for this.

---

I also found 2 module DXE and PEIM, but nothing really to do with them could not.