;This file is Insydeflash utility configuration file
[CommonFlash]
SwitchString=
;SwitchString default : empty.
; String : A switch flag setting string. Ex: "ACEN DCEN FHRST"
; Detail parameter please reference following table.
; Parameter | Description
; -------------+----------------------------------------------
; PTEN | All protection enable.
; PTDIS | All protection disable.
; ACEN | AC protect checking enable.
; ACDIS | AC protect checking disable.
; DCEN | DC & Gangue protect checking enable.
; DCDIS | DC & Gangue protect checking disable.
; RESSEN | BIOS Regression enable.
; RESSDIS | BIOS Regression disable.
; PJMDEN | Project Model string protect checking enable.
; PJMDDIS | Project Model string protect checking disable.
; FHOS | System back to OS after flash BIOS completely.
; FHST | System directly shutdown after flash BIOS completely.
; FHRST | System directly reboot after flash BIOS completely.
; CPVER:[Num] | Common Flash Version information
; | ex: [Num] is decimal and start from 1.
; -------------+----------------------------------------------
;
;ErrorMsg00 default : empty.
; String : No error message.
;ErrorMsg01 default : empty.
; String : AC error message.
;ErrorMsg02 default : empty.
; String : DC error message.
;ErrorMsg03 default : empty.
; String : DC gas gauge under xx% message.
;ErrorMsg04 default : empty.
; String : BIOS version error message.
;ErrorMsg05 default : empty.
; String : Model name error message.
;ErrorMsg10 default : empty.
; String : No support this version of Flash Common Interface message.
;The number of ErrorMsg## is in hex.

[Version]
Version=
;Insydeflash utility will display the value at top
;Version default : empty.
; String : Version number string for display.
; It will be show on UI, and append on current version number.
; When current version is 5.01 and this version string set to "12",
; then it will show "InsydeFlash V5.01.12" on main dialog caption.

[FDFile]
FileName=0338DF08.BIN
;FileName default : empty.
; String : Utility always load this file.
; If the FileName is empty, utility will search current directory
; and load the first found FD file.

[BackupROM]
Flag=0
FilePath=c:
FileName=
;Flag default : 0.
; 0 : No backup BIOS.
; 1 : Backup current BIOS and new BIOS binary.
;FilePath default : empty.
; empty : Use current directory.
; String : Directory for backup BIOS.
;FileName default : empty.
; empty : Use platform ID as file name.
; String : File name for backup BIOS.
;xxx.xxx = Current BIOS image
;xxx_01.xxx = Previous BIOS image
;xxx_new.xxx = New BIOS image

[UpdateBlock]
PatchFv=0
FileName=intel.fv
FileOffset=0
FlashSize=0
PhysicalAddress=FFF00000
FvID=945PL-A
IDErrorAction=1
;PatchFv default : 0.
; 0 : Update all binary in file.
; 1 : Partial update mode.
;FileName default : empty. (Only available in partial update mode.)
; String : BIOS file name.
;FileOffset default : 0. (Only available in partial update mode.)
; Integer : The offset of file for reading.
;FlashSize default : 0. (Only available in partial update mode.)
; Integer : The size to flash.
;PhysicalAddress default : FFF00000. (Only available in partial update mode.)
; DWORD : Physical address in hex.
;FvID default : empty.
; String : When flag in Platform_Check section is 1, utility will compare
; this value with current platform ID.
;IDErrorAction default : 1. (Only available when ID comparison is failed.)
; 1 : Show error message box.
; 2 : Close utility and reboot or shutdown.

[Platform_Check]
Flag=2
PlatformName1=338D
PlatformName2=3393
PlatformName3=
PlatformName4=
PlatformName5=
PlatformName6=
PlatformName7=
PlatformName8=
PlatformName9=
PlatformName10=
PlatformName11=
PlatformName12=
PlatformName13=
PlatformName14=
PlatformName15=
PlatformName16=
PlatformName17=
PlatformName18=
PlatformName19=
PlatformName20=
;This flag is the switch of comparing bios project ID with ROM file project ID.
;Flag default : 3.
; 0 : Don't check project ID.
; 1 : Check project ID of new file.
; If ID is different with current BIOS, the utility will close.
; 2 : Utility will compare current platform ID with the 20 platform IDs.
; If any one is match, it will go ahead, otherwise utility will close.
; 3 : Depends on BIOS report.
;PlatformName1~20 default : empty.
; String : If ROM file do not contain correct ID, user can define ID here.

[PlatformVersion]
Flag=0
Version1=
Version2=
Version3=
Version4=
Version5=
Version6=
Version7=
Version8=
Version9=
Version10=
Version11=
Version12=
Version13=
Version14=
Version15=
Version16=
Version17=
Version18=
Version19=
Version20=
;This flag only available when the [Platform_Check] is enable to compare the 20 platform IDs.
;The Version is pair with the PlatformName.
;For example: When the platform ID matches with PlatformName2, the Version2 will be used.
;Flag default : 0.
; 0 : Don't use multi version.
; 1 : Use the version in the list instead of the version in file.
;Version1~20 default : empty.
; String : If ROM file do not contain correct version, user can define version here.

[AC_Adapter]
Flag=1
BatteryCheck=1
BatteryBound=50
ConnectACAndDC=1
;This flag is the switch of checking AC.
;Flag default : 1.
; 0 : Don't check AC.
; 1 : Check AC.
;BatteryCheck default : 0.
; 0 : Don't check battery.
; 1 : Check battery.
;BatteryBound default : 50.
; Integer (1~100) : Low battery boundary (percentage).
; When BatteryCheck=1 this value will be referenced.
; And only when the battery life percentage is bigger then
; inputed value, it can do flash.
;ConnectACAndDC default : 1.
; 0 : Don't connect AC and DC check.
; 1 : Check AC, if no AC plug will check DC.

[Bios_Version_Check]
Flag=0
;This flag is the switch of checking BIOS version.
;Flag default : 2.
; 0 : Don't check rom file version.
; 1 : Check BIOS version.
; When rom file version is older then BIOS, it will display
; a warning message and close application.
; 2 : Depend on BIOS report.

[ForceFlash]
ALL=0
BB_PEI=0
CPU_Microcode=0
Variable=0
DXE=0
EC=0
Password=0
OEM_NVS=0
Logo=0
Type#09=0
Type#08=0
;ALL default : 0.
; 0 : Reserve all protected areas.
; 1 : Flash all ROM parts.
;BB_PEI, CPU_Microcode, Variable, DXE, EC, Password, OEM_NVS, Logo, Type#09, Type#08
; default : 0.
; 0 : Protect these areas if BIOS report them are protected areas.
; 1 : Force flash these areas if BIOS report them are protected areas.

[FlashComplete]
Action=2,2
Dialog=1
Counter=10
ActionOverride=0
;Action default : 2.
; 0 : Do nothing.
; 1 : Shutdown.
; 2 : Reboot
;Dialog default : 0.
; 0 : Don't display dialog.
; 1 : Display dialog.
; 2 : Display dialog and wait several seconds.
;Counter default : 15. (Unit is second)
; Integer : The number of seconds for count down to reboot or shutdown.
;ActionOverride default : 0
; 0 : This key is disabled. Flash utility bases action key setting to do original behavior.
; 1 : This key is enabled. Flash utility just does close itself in silent mode.
;The value behind comma is the return value in silent mode.

[UI]
Confirm=1
Silent=0
SilentWithDialog=1
DisplayID=1
InsydeInfo=1
VersionInfo=1
GroupInfo=1
ConfirmInfo=1
OnFlashingBeep=0
OnFlashingBeepDelayTime=800
DisableMouseAndKeyboardInput=1
BeforeRunToolDelayTime=0
ProgramStartToWrongMessageBox=0
GetFDFileButton=0
DelayBeforeFlash=7
;Confirm default : 1.
; 0 : Don't display confirm dialog.
; 1 : Display confirm dialog.
;Silent default : 0.
; 0 : Normal mode.
; 1 : Silent mode, hide main dialog.
;SilentWithDialog default : 2.
; 0 : Don't display any dialog.
; 1 : Display main dialog only.
; 2 : Display all dialogs except main dialog.
;DisplayID default : 1.
; 0 : Don't display BIOS ID.
; 1 : Display BIOS ID.
;InsydeInfo default : 1.
; 0 : Don't display Insyde copyright information and URL.
; 1 : Display Insyde copyright information and URL.
;VersionInfo default : 1.
; 0 : Don't display BIOS version.
; 1 : Display BIOS version.
;GroupInfo default : 1.
; 0 : Don't display group box.
; 1 : Display group box.
;ConfirmInfo default : 0.
; 0 : Don't display BIOS version and date information in confirm dialog.
; 1 : Display BIOS version and date information in confirm dialog.
;OnFlashingBeep default : 0.
; 0 : Don't beep on flashing.
; 1 : Beep on flashing.
;OnFlashingBeepDelayTime
; default : 800. (Unit is millisecond)
; Integer : Set beep delay time(Milliseconds).
;DisableMouseAndKeyboardInput
; default : 0.
; 0 : Don't hook mouse and keyboard.
; 1 : Hook mouse and keyboard without "CTRL+ALT+DEL".
;BeforeRunToolDelayTime
; default : 0. (Unit is second)
; Integer : Delay number of seconds before flash process.
;ProgramStartToWrongMessageBox
; default : 0.
; 0 : Don't pop-up warning dialog before flash process.
; 1 : Pop-up a warning dialog before flash process.
;GetFDFileButton default : 0.
; 0 : Hide FD file browse button.
; 1 : Show the button for browsing FD file.
;DelayBeforeFlash default : 0. (Unit is second)
; Integer : Delay number of seconds before flashing.

[Others]
ClearCMOS=0
FlashDevice=0
DisableCompare=0
DisableVerify=0
VerifyErrorRetry=3
SMIErrorRetryDelay=100
SMIErrorRetry=5
AllowVersion=A.02
ForceIHISIVersion=
;ClearCMOS default : 0.
; 0 : Don't clear CMOS.
; 1 : Clear CMOS.
;FlashDevice default : 0.
; 0 : Default.
; 1 : SPI flash part.
; 2 : Non-SPI flash part.
;DisableCompare default : 0.
; 0 : Read BIOS and compare difference before writing.
; If the readed data is the same as the data we want to write,
; it will not do the write action.
; 1 : Don't do compare before writing. Just do write action directly.
;DisableVerify default : 0.
; 0 : Verify BIOS after writing.
; 1 : Don't verify BIOS after writing.
;VerifyErrorRetry default : 3.
; Integer : Retry times.
; If the value is not zero means enable verify retry, and will retry setted times.
; 0 for disable verify retry.
;SMIErrorRetryDelay
; default : 100. (Unit is millisecond)
; Integer : Delay time during SMI error retry(millisecond).
;SMIErrorRetry default : 5.
; Integer : Retry times when SMI fail. (Note: This may let flash time become longer.)
;AllowVersion default : 000.
; Version : Utility will do following process.
; If you want to run into UEFI flash update, the current version (on board BIOS) must be higher than this version
; (as "AllowVersion" key).
; Current BIOS version > allow version: Utility will run into UEFI flash update.
; Current BIOS version <= allow version: Utility will run into Window flash to update BIOS.
; If AllowVersion=000, utility always into UEFI flash update.
;ForceIHISIVersion default : empty.
; Version : This flag will force override the IHISI version which will passing to BIOS.
; Ex: 1.9.1

[Option]
Flag=2
;Flag default : 0.
; 0 : Auto flash mode.
; 1 : User option mode, including option, start, exit buttons.
; 2 : User flash mode, including start, exit buttons.

[ApplicatonFlash]
Flag=0
Model=
;Some specific platforms need to flash by application. Only support 32bit Windows.
;Flag default : 0.
; 0 : Flash by BIOS.
; 1 : Flash by application.
;Model default : empty.
; String : The name of the platform.

[ReturnErrorCode]
FileNotFound=259,259
ErrorBeforeFlash=259,259
WriteROMFail=5,259
WriteECFail=6,259
WriteExtraDataFail=7,259
;FileNotFound default : 3.
; Integer : If utility can't find the BIOS file, it will return this error code.
;ErrorBeforeFlash default : 4.
; Integer : If error occur before flash process, it will return this error code.
;WriteROMFail default : 5.
; Integer : If error occur during write ROM process, it will return this error code.
;WriteECFail default : 6.
; Integer : If error occur during write EC process, it will return this error code.
;WriteExtraDataFail
; default : 7.
; Integer : If error occur during write Extra Data process, it will return this error code.
;The value behind comma is the return value in silent mode.

[UpdateEC]
Flag=0
EC_Dialog=0
BIOS_Only=0
Progress_Bar=0
EC_Only=0
EC_Path=
;Flag default : 0.
; 0 : Don't flash EC by BIOS.
; 1 : Flash EC by BIOS.
;EC_Dialog default : 0.
; 0 : Don't display confirm dialog when begin to update EC.
; 1 : Show confirm dialog.
;BIOS_Only default : 0.
; 0 : Flash EC and BIOS file.
; 1 : Only flash BIOS part of the merge file.
;Progress_Bar default : 1.
; 0 : Flash EC without progress bar.
; 1 : Flash EC with progress bar.
;EC_Only default : 0.
; 0 : Flash EC and BIOS file.
; 1 : Flash only EC binary file.
;EC_Path default : empty.
; String : EC file name.

[UpdateExtraData]
Flag=0
DataType=1
type1errorcodeA0=messagestring1
;Flag default : 0.
; 0 : Do not update extra data.
; 1 : Update extra data by IHISI.
; If new image is NOT processed by IFIT tool, please do not enable this function.
;DataType default : 1.
; Integer : Integer number. The meaning of data type number will define by BIOS OEM.
; : Now will support 1, 4~C.
; : Ex:1,4,6,5 -> Mean you want to update 1,4,6,5 Four type of data.
; : Notice: 2, 3 cannot used.
;type#errorcode??=messagestringX
; : This key is for customizing error message which occur in update extra data.
; For example:
; When an error occur when updating type 4, BIOS return the error code A2.
; AP will find the key "type4errorcodeA2" and get the string ID "messagestring4", and find the string in [MessageStringTable].
; Then shows the message string instead of standard error message.
; # : The the type number define in DataType. (Hex)
; ?? : The error code returned by BIOS. Available value range A0~AF.
; X : Message string number.
;This feature will let you just input data to update by IHISI. Data type will define by BIOS OEM.
;If new image is NOT processed by IFIT tool, please do not enable this function.

[UpdateOEMME]
MEFileName=
CheckVersion=0
;MEFileName default : empty.
; String : if this file name or Multi-FD ME file name exist tool will run this case to flash ME.
;CheckVersion default : 0.
; 0 : Don't check ME file version.
; 1 : Check ME file version.
; 2 : When ME flash error is cause of same version and downgrade version do not show error and continue to flash.

[Region]
BIOS=0
GbE=0
ME=0
DESC=0
Platform_Data=0
;This section is used to control SPI descriptor mode.
;If the BIOS is built without additional Intel firmware as like ME,GBE and DESC or BIOS is a AMD firmware which does not support ME, please ignore section.
;BIOS default : 0.
; 0 : Don't flash.
; 1 : Flash BIOS region.
;GbE default : 0.
; 0 : Don't flash.
; 1 : Flash GbE region.
;ME default : 0.
; 0 : Don't flash.
; 1 : Flash ME region.
;DESC default : 0.
; 0 : Don't flash.
; 1 : Flash DESC region.
;Platform_Data default : 0.
; 0 : Don't flash.
; 1 : Flash Platform_Data region.

[Log_file]
Flag=1
FileName=InsydeFlash.Log
CMOS_Flag=0
CMOS_INDEX_PORT=70
CMOS_DATA_PORT=71
CMOS_OFFSET=68,69
;Flag default : 0.
; 0 : Don't log to file.
; 1 : Utility will log to specify file.
;FileName default : InsydeFlash.Log.
; String : Log file name.
;CMOS_Flag default : 0.
; 0 : Disable CMOS debug.
; 1 : Enable CMOS debug.
;CMOS_INDEX_PORT default : 70. (hex)
; 70 : Use 0x70 port as index port.
; 72 : Use 0x72 port as index port.
;CMOS_DATA_PORT default : 71. (hex)
; 71 : Use 0x71 port as index port.
; 73 : Use 0x73 port as index port.
;CMOS_OFFSET default : 0,0. (hex)
; CMOS_OFFSET=xx,yy the xx is high byte offset; yy is low byte offset, and the range is 0~FF (hex)

[ReturnCodeDefinition]
RETURN_SUCCESSFUL=0,3010
RETURN_MODEL_CHECK_FAIL=259,259
RETURN_USER_CONFIRM_CANCEL=1602,259
RETURN_AC_NOT_CONNECT=1602,259
RETURN_LOAD_DRIVER_FAIL=1602,259
RETURN_NEED_REBOOT=3010,3010
RETURN_USER_EXIT=1602,259
RETURN_SAME_VERSION_CHECK=99999,259
; default : RETURN_SUCCESSFUL=0
; RETURN_MODEL_CHECK_FAIL=259
; RETURN_USER_CONFIRM_CANCEL=1602
; RETURN_AC_NOT_CONNECT=1602
; RETURN_LOAD_DRIVER_FAIL=259
; RETURN_NEED_REBOOT=3010
; RETURN_USER_EXIT=1602
; RETURN_SAME_VERSION_CHECK=1602
; 99999 : Use the default value above.
; Other integer : Use input value as return code.
;The value behind comma is the return value in silent mode.

[VARIABLE]
Flag=0
SystemManufacturer=0
BoardManufacturer=0
SystemProductName=0
SystemSerialNumber=0
Uuid=0
POSTInfo=0
Version=0
SLP=0
Setup=0
BootPriority=0
LastBootRecord=0
AcpiGlobalVariable=0
SLP2M=0
SLP2P=0
;Flag default : 0.
; 0 : Do nothing. The following settings in this section won't be referenced.
; 1 : Erase variable before flash.
; 2 : Erase variable only.
;All Other Values default : 0.
; 0 : Don't erase variable.
; 1 : Erase variable before flash base on the "Flag" settings.

[MULTI_FD]
Flag=0
FD#01=PCI,0,1F,2,80,00007006,00007007,9.fd,ME.fd
FD#02=PCI,2,0,0,4,00100006,00100007,7.fd,ME.fd
FD#03=PCI,2,0,0,18,0000000c,0000000e,9.fd,ME.fd
FD#04=MPCIIO,2,PCI-0-1F-0-00-FFFFFFFF-3B0B8086,IO-538-0100-0000,9.fd,ME.fd
FD#05=IO,C0,5AABFE02,5AABFE02,9.fd,ME.fd
FD#06=IO,1F6,E7,E4,7.fd
FD#07=IO,C0,fe03,fe03,7.fd
FD#08=IO,C0,03,01,7.fd
FD#09=PCI,2,0,0,0,00000813,00000812,9.fd
;Flag default : 0.
; 0 : Normal mode.
; 1 : Multi-FD mode. It will reference FD#XX values.
;FD#XX support up to 99 files FD#01 ~ FD#99
;This section supports IO space type, PCI address type and multiple condition type.
;FD#XX=IO,[Offset],[Mask],[Value],[File Name],[ME File Name],[INI File Name]
;FD#XX=PCI,[Bus],[Device],[Function],[Offset],[Mask],[Value],[File Name],[ME File Name],[INI File Name]
;FD#XX=MPCIIO,[Conditon Number],PCI-[Bus]-[Device]-[Function]-[Offset]-[Mask]-[Value],IO-[Offset]-[Mask]-[Value],[File Name],[ME File Name],[INI File Name]
; [Offset] : Offset in hex.
; [Mask] : IO type supports BYTE, WORD and DWORD in hex.
; For example, BYTE -> 03, WORD -> 0A01, DWORD 100400D3
; PCI type supports DWORD in hex only.
; [Value] : IO type supports BYTE, WORD and DWORD in hex.
; PCI type supports DWORD in hex only.
; [File name] : File name of FD.
; [ME File name] : ME File name of FD. If it exists, utility will run OEMME flash feature.
; [INI File name] : INI File name for overwrite.
; If it exists, utility will load the new ini file and overwrite all sections (except [MULTI_FD]) exist in new ini file.
;When [Offset] & [Mask] == [Value], it will flash the following files ([File Name] and [ME File Name]).

[BIOSVersionFormat]
BIOSVFEnable=0
VersionFormat=TXXXXXXX.N.NN.NN
;This BIOSVFEnable flag is the switch of BIOSVersionFormat.
;FunctionEnable default : 0
; 0 : function is disabled
; 1 : function is enabled.
;VersionFormat X : The field is masked. The mask field will be NOT compared.
; N : The digit field can be ASCII, case-sensitive.
; T : It's the same definition with N. But T is a case-insensitive.
; . : Dot is also a mask.

[PermitFlashVersion]
PFVFunctionEnable=0
SingleVersion=
MultiVersion1=
MultiVersion2=
MultiVersion3=
MultiVersion4=
MultiVersion5=
MultiVersion6=
MultiVersion7=
MultiVersion8=
MultiVersion9=
MultiVersion10=
MultiVersion11=
MultiVersion12=
MultiVersion13=
MultiVersion14=
MultiVersion15=
MultiVersion16=
MultiVersion17=
MultiVersion18=
MultiVersion19=
MultiVersion20=
;This section is for conditional version definition for BIOS update.
;When this function enabled, flash utility will compare on board BIOS version with conditional version and then decide to continue flash progress or not.
;For example: In following condition PFVFunctionEnable=1, SingleVersion=A03, "Please update to BIOS version A03 first!".
; When on board BIOS version is older then A03,
; it will popup the error dialog with the message "Please upate to BIOS version A03 first!" and then terminated.
; Otherwise it will continue orginal flash process.
;The MultiVersion1~20 are similar as SingleVersion, but they only available when the [Platform_Check] is enable to compare the 20 platform IDs.
;They must be pair of the PlatformName of [Platform_Check] section.
;For example: When the platform ID matches with PlatformName2, the Version2 will be used.
;PFVFunctionEnable default : 0.
; 0 : Disable conditional version check.
; 1 : Enable conditional version check.
;SingleVersion default : empty.
; String : XXXX, "Message String"
; XXXX is the conditional version, regarding version check rule please refer section "BIOSVersionFormat".
; "Message String" is the message to show when the on board BIOS version is older than the conditional version.
;MultiVersion1~20 default : empty.
; String : XXXX, "Message String"
; XXXX is the conditional version, regarding version check rule please refer section "BIOSVersionFormat".
; "Message String" is the message to show when the on board BIOS version is older than the conditional version.

[PasswordCheck]
PasswordCheckEnable=0
MsgCaption=Password confirmation
MsgPreface=Please enter password
MsgSuccess=Password is correct.
MsgFailure=Password is incorrect. Please retry again.
;PasswordCheckEnable
; default : 0.
; 0 : Disable the password check function.
; 1 : Enable the password check function.
;MsgCaption default : "Password confirmation"
; String : The dialog box caption.
;MsgPreface default : "Please enter password"
; String : The preface of password entering.
;MsgSuccess default : "Password is correct."
; String : The string displaied when the comparing result returned by BIOS is 0x00.
;MsgFailure default : "Password is incorrect. Please retry again."
; String : The string displaied when the comparing result returned by BIOS is 0x01.

[MessageStringTable]
messagestring1="Warning message 1"
;The message string must as following format messagestring#="Your message here."
;The # is a number in Decimal or Hex.