thanks a lot..

in side \UBU_v188\Modules\SATA\FFS\
there are
marv_ahci_43.ffs
marv_ahci_491.ffs
marv_raid_492.ffs
marv_raid_a2.ffs

is it ok insert it by using MMtool
and i found 'marv_raid_xx.ffs - 1.1.0.1015 - GUID A28F1CD7-, 4953F720-...2 (compressed)' this text inside VerDID.txt it mean they are alread compressed??
so i have to insert it whit out check in compressing checkbox?
and what difference between marv_ahci_43.ffs and marv_ahci_491.ffs??

@dygkset

You can try to insert them, I don't think there is much risk in it. You can use the ones inside UBU, since they are already compressed, so there is less chance of a space warning.

You should use marv_ahci_43.ffs and/or marv_raid_a2.ffs, since those are most likely to be found in Asrock boards. They have different GUID than *491.ffs, *492.ffs, that is all.

i try the insert by mmtool....

but threr is graphic bug... in mmtool like this

do you know how to fix it??

i use mmtool inside of UBU package..

yes gui look like pic...

open .bin file is not problem..

but i can see the some butten and test box.

i use windows 8.1 ko-kr
if i change OS it can help me?

yes i set 100%

i install windows 10 preview in vm..

that bug.. not appear...

and another vm install windos 8.1 using same image when i was use at main system .. appear bug..

i think it is truble whit languge or same thing

ok
i solved gui problem by using vm..

so first insert 'marv_ahci_43.ffs' unchecked -'for option rom only' and select 'insert as is'
-do not work. it also can not find hdd in 'disableed csm'...

then insert 'marv_ahci_491.ffs' unchecked -'for option rom only' and select 'insert as is'
-do not work either

do i have mistake in process?
or in my case not enough to just do that... it need additional process?

Those boards also use an EFI loader, but that is compiled for each board. Can you try with both marv_ahci_43.ffs and marv_raid_a2.ffs ?

Another question: are you sure that everything else is EFI compatible? What about graphic card, RAID drivers if you use RAID?

ok..

i explane situation..


intel x79 sata controller
-samsung 850 pro 256 X 2 raid 0 volume
L windos 8.1 EFI
-WD 1TB 7200rpm
L NTFS for data
-WD 1TB 52000rpm
L exFAT for data

marvel 9172
- sandisk x110 128g
L OSX 10.10 EFI

and VGA is UEFI capable.

so i can boot windows 8.1 in CSM disabled
and i can boot osx in CSM abled

but in CSM disabled.... bios can not scan disk connected marvel controller..... so bios can not read EFI in sandisk x110..

i want boot CSM.. my board is old type... so use CSM boot take so much time...

sounds like he might be using an addon card maybe!?!