@Santa2017
Yes Sylar76 modded bios with microcode 49, and I modded a bios based on that of Sylar76 with the microcode 55

Please give me any suggestion. Look like we cannot use same method in the past to update MCU.

@Santa2017 SoniX gave a method in the previous page I believe

It won't work. I already modded R6A,R6E with 02000055/RST17.0.0.3592/EFI 0.0.22/0.1.13 every module checked twice. I'd following SoniX adviced.

There still CODE 4F CHECK CPU. Did you mean we must update some module first then left the binary file once then modded other modules follow?

@Fernando @SoniX I updated my bios file with cpu microcodes replacement,in the final section I pressed U and the UBU Tool replaced all with "YES" so when I selected "0" and return in main menu it's mean done? on the latest section UBU Tool asking me for "Rename file" then I pressed "1" and exit automatically closed. so now I can see my R4G.CAP in the UBU folder. Everything is done?

For update mCode on Aptio V use only MMTool v5.2.0.24!

Zitat von westlake im Beitrag #4605

---

EFI AMD RAIDXpert2-Fxx @ 9.2.0-00087

---

Hi!
UBU 1.70 rc 18.3 can't recognise ASMedia ASM1061 additional controller in my mainboard Asrock Fatal1ty Z270 Gaming K6 (Bios 2.30).
There is option 4 in main menu to choose "other SATA controller" but when i press it nothing happens.
Can someone check if without recognising all controllers I can flash bios with new microcode ?

link to bios download: https://www.asrock.com/MB/Intel/Fatal1ty.../index.asp#BIOS
Thank You
Kast0r

If it can't see it, to update it, then stock controller file will be there still, so it will work same as before.
You can update microcodes, that has nothing to do with other controllers, and you can choose to update any single one thing you want without the others, that's OK too (I think you are asking this about microcodes, yes it's fine to do by themselves+

I have Porblems with the new Bios from ASUS Rampage VI Extreme 1603
Link: https://dlcdnets.asus.com/pub/ASUS/mb/LG...E-ASUS-1603.zip

MMTool > Firmware Volume open error.

This happens in Microcode Replacement (MMTool 5.0.0.7)

[Preparing for replacement]
BIOS file backup
Empty GUID: File replaced
Empty GUID: File replaced
Empty GUID: Error!
BIOS file restored


5.0.0.7 said in UBU Tool > File not found
4.5 said in UBU Tool > File not found


I dont need a solution right now. In the future, please. :)

1 - [Discussion] UBU Tool related Questions, Reports and Suggestions (309)
2 - [Discussion] UBU Tool related Questions, Reports and Suggestions (310)

Added:
MMTool 4.xx and 5.0.0.7 optimal only for Aptio 4!

Zitat von Fernando im Beitrag #4641

---

This may have worked, but why didn't you choose the recommended option "M" (using the MMTool for this task)?

---