i can delete that option rom only from uefitool, do you think?

No, only MMTool 4.50 or 5.0
Delete only Option ROM VenID:DevID 8086:10be

Added:
@pipes80

If you wait some time, I will add support for some files.

I'm trying to update bios for GA-H87-HD3 with ubu. everything updates normal except microcodes. Original one has 2 modules for haswell but with different revisions, after ubu's with 'u' choice I have only one 306C3 module. Flashing this bios gives me infinite boot. I use patched mmt 5.2.0.24
I just want to replace in latest bios(F10) 306C3 module to revision 7 to have turbo clocks on all cores with non-k cpu and have other roms up-to-date. What am I doing wrong?

@xBurn - if you want more microcodes, or update all of them leaving all that's in there originally you will have to update the microcodes outside of UBU (using MMTool or UEFITool/Hex etc) If doing this please notice there is 4 microcodes dupplicated into two different volumes)
Does M option gives same issue or not.

@Lost_N_BIOS what version of mmt should I use for M option ? 4.50.0.23 and 5.0.0.7 gives me 'file size exceeds the volume size' error in ubu but only 4.5 can delete and insert cpu microcodes for this bios outside ubu, but also it shows only 1 volume :/
5.2.0.24 will do the job? and thx for help :-)

You'll have to adjust the microcode file size using FF's or 00's, or use UEFITool instead. Due to the dual volumes and only one showing in 4.5, I would use UEFITool instead.
In UEFITool you will find three volumes matching microcode GUID - 17088572-377F-44EF-8F4E-B09FFF46A070, only the 2nd and 3rd are microcode, extract those "Body" and edit, then reinsert as body at each location.
You only need to extract once at 2nd or 3rd position, both are same then edit and replace at both positions.

Tried UBU v1.70.rc12.3 on an updated Fujitsu bios for an older Q87 board (D3222-B). The script stops with an open mmtool- window after detecting orom modules and when updating modules. When closing the mmtool- windows by pressing Esc UBU continues and seems to work properly. Same with mmtool 5.0 and 5.2 (patched).

Last lines when opening:
call :csm_extr || set csmx=echo; && if 4 NEQ 0 cecho {0E}CSMCORE not found{#}{\n}
if 4 NEQ 0 start /b /min /wait mmtool bios.bin /e csmcore && exit /b 0

last lines when updating sata:
if 0 == 0 goto sataend
call :csm_extr
if 4 NEQ 0 start /b /min /wait mmtool bios.bin /e csmcore && exit /b 0

Bios file, (the file is D3222-B1.UPD), Bios description

@xBurn

What version of UBU are you using?

@lfb6

I fixed this problem.
If I understand correctly, then you have a notebook?
CSMCORE is in your BIOS, BUT all OROM are in their GUID. Unfortunately, at the moment, the UBU does not work individually with OROM.

hello, would anybody here show me the way to update intel RST pre-OS? clue maybe :D

i just want to try to make intel optane work on secondary drive, it's still won't with the latest official

Zitat von SoniX im Beitrag #4418

---

... @lfb6 .... If I understand correctly, then you have a notebook? ....

---

@lfb6
In general, it is necessary to make some changes in the UEFIIExtract, but so far there is no time for this, as it is necessary to deal with UEFITool NE.
With the update of all file EFI and OROM, too, will not work, since there is no free space in the BIOS.

Thansk a lot! I was just surprised that Fujitsu delivered a new bios for this board with latest microcode and ME and wanted to check the other versions (Efi/orom), too. I don't use this board at the moment. Decided to mention it since I wasn't sure if this error was correlated to this special bios or might be of interest for others, too.

Each manufacturer makes its BIOS as it sees fit.
Over time, it will be possible to solve this situation.

@SoniX
it can't delete from mmtool because is efi bios and it's located in csmcore

@pipes80
Check it out. Replaced VBIOS, LAN Marvell-Yukon and SATA Marvell. Removed LAN Intel.
Mod without IRST and Microcodes/

Edit:
Attach removed