Forum - RE: [Discussion] UBU Tool related Questions, Reports and Suggestions

Win-Raid Forum (Drivers - Firmware - Modding) � BIOS Modding � BIOS Modding Guides and Problems � [ARCHIVE] Outdated UBU Tool related Questions, Reports and Suggestions

Page 291 of 335 � Page 1 ... 286 287 288 289 290 291 292 293 294 295 ... 335 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#4351 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Tue Sep 11, 2018 10:28 am (Last edited: Tue Sep 11, 2018 10:30 am)

Here is updated BIOS @greb I only updated 306E4 microcode, done manually with UEFITool 0.25 + hex (Extract one ucode module, edit, replace at x4 locations - not 5) - Should be OK

https://www.sendspace.com/file/1asctb

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

This thread has been closed.

#4352 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Tue Sep 11, 2018 11:30 am

@Lost_N_BIOS thank you very much , All is ok the pc start correctly.

This thread has been closed.

#4353 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Tue Sep 11, 2018 12:25 pm

Great, thanks for quick report back!

This thread has been closed.

#4354 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Thu Sep 13, 2018 6:22 am

Its not work by me.

This thread has been closed.

#4355 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Thu Sep 13, 2018 6:52 am (Last edited: Thu Sep 13, 2018 7:50 pm)

MDoehler

Show info

Posts:	36
Registered since:	05.14.2014

Hi there again,

just got my new ASRock Z370 Professional Gaming i7 today and tried to update latest BIOS v3.10 with latest UBU (as i always did with my ASRock Z270 Super Carrier w/o any problems, evan when flashing).
But when i try to flash it through "Instant flash" i allways get the message "Secure flash check fail!". What am i missing? Or is it possible, that ASRock has changed their Capsule-Method once again and we need to patch this with a newer fix?
I read the whole thread but could not find any post mention this behaviour.

PS: tried it with older UBU1.69.xx and with latest UBU1.70.rc8 - also tried the method mentioned here.

EDIT:
This is what i tried so far:

opened the attached original ASRock Z370 Pro Gaming i7 BIOS v3.10 with UBU BIOS Updater v1.69.17 - and this is the log file:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
 

UEFI BIOS Updater v1.69.17 - Z37PG73.10 Logfile:
 
Scanning BIOS... Please wait...
Define BIOS platform - AMI Aptio V
Brand ASRock
Remove ASRock Protection
Remove ASRock new protection...
Found Option ROM VBIOS in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0 C5A4306E-E247-4ECD-A9D8-5B1985D3DCDA
Found Option ROM in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0 50339D20-C90A-4BB2-9AFF-D8A11B23BC15
Found Option ROM in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0 0FDD6564-FF41-4C31-8BC4-376130E5939A
Found Option ROM in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0 D46346CA-82A1-4CDE-9546-77C86F893888
Found EFI Intel GOP Driver GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0 380B6B4F-1454-41F2-A6D3-61D1333E8CB4
Found EFI Intel Raid Controller GUID 7B17F47D-DA3E-48F3-8EFE-ABC82CB77F2C
Found EFI AMI NVMe Driver GUID 634E8DB5-C432-43BE-A653-9CA2922CC458
Found EFI Intel LAN PRO/1000 Undi GUID 48392194-D155-4567-9AAF-FA805BAEEC6C
Found EFI Intel LAN Gigabit Undi GUID 9006872D-3A86-4BAE-A2F0-E527B9D7119E
 
 This BIOS on Aptio V platform, known issues:
  - There may be problems with updating the CPU microcode
 
Drücken Sie eine beliebige Taste . . .
 
Enter number:0
 
1 - Rename to mod_Z37PG73.10
0 - As Is BIOS.BIN
 
Rename? :1
bios.bin ===> mod_Z37PG73.10
 

So you see, nothing was changed by myself - just opened and saved as modified BIOS file for "instant flash". But this gives error message "Secure flash check fail!":

So i tried same original, unmodified BIOS with latest UBU v1.70.rc8 - and this is the Logfile:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
 
UEFI BIOS Update v1.70.rc8 - Z37PG73.10 Logfile:
 
Scanning BIOS. Please wait...
Define BIOS platform - AMI Aptio V
Manufacturer - ASRock
Model - Z370 Professional Gaming i7
 
        [EFI  Drivers - Find and Extract]
Intel GOP SubGUID 380B6B4F-1454-41F2-A6D3-61D1333E8CB4
Intel RST GUID 7B17F47D-DA3E-48F3-8EFE-ABC82CB77F2C
AMI NVMe GUID 634E8DB5-C432-43BE-A653-9CA2922CC458
Intel 1Gb GUID 48392194-D155-4567-9AAF-FA805BAEEC6C
Intel 1Gb GUID 9006872D-3A86-4BAE-A2F0-E527B9D7119E
 
        [OROM  - Find and Extract]
VBIOS in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0
OROM in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0
OROM in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0
OROM in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0
Drücken Sie eine beliebige Taste . . .
 
Enter number:0
 
1 - Rename to mod_Z37PG73.10
0 - As Is BIOS.BIN
 
Rename? :1
bios.bin ===> mod_Z37PG73.10
 
********************************************************
* Many thanks for the use of the project.              *
* See Information if You want to support this project. *
********************************************************
 
 

Also tried to "instant flash" this modified BIOS - but still the same message: "Secure flash check failed!"

The modfication seems to be ok, cause capsule is still in the same position in this BIOS:

But the UBUmodification still seems not to work on ASRock Z370 BIOS files and maybe some of the pros (@CodeRush @ket @SoniX @lordkag) could take a look on it again to fix the "Secure flash check fail!"-message again.
P L E A S E . . .

As i already mentioned above: always used UBU (v1.69.17 and v1.70.rc8) to bring my ASRock Z270 Super Carrier BIOS to the latest SATA-, VBIOS-, Network-EFI and Microcode and it never was a problem to "instant flash" those modified BIOS files before.
So any help with this is greatly appreciated. Thanx in advise....

EDIT by Fernando: Codes put into spoilers and pictures resized and directly attached by using the Forum software (to save space, the pics can be enlarged by clicking onto them)

This thread has been closed.

#4356 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Thu Sep 13, 2018 3:07 pm (Last edited: Thu Sep 13, 2018 3:33 pm)

Asus P9D-I 1801 or 2101- can't update IRSTe Orom from 3.7 to 4.7 with 1.70rc9. Put the correct files in RSTe folder, UBU does recognize them but doesn't update OROM. Same result with mmtool 5.0 and 5.2. UBU 1.69 can do both and the system is working fine with this version. Where is my fault? Thanks in advance!

P9D-I 2101
P9D-I 1801

This thread has been closed.

#4357 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Thu Sep 13, 2018 4:43 pm

Zitat von lfb6 im Beitrag #4356
Asus P9D-I 1801 or 2101- can't update IRSTe Orom from 3.7 to 4.7 with 1.70rc9. Put the correct files in RSTe folder, UBU does recognize them but doesn't update OROM.

Fixed - 1.70 rc9 fix

This thread has been closed.

#4358 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Thu Sep 13, 2018 11:27 pm (Last edited: Thu Sep 13, 2018 11:29 pm)

I have found a bug in UBU v1.70.rc9-fixed when updating Asus Z9PE-D8 WS mainboard.

At main menu -->
4 - Other SATA Controller [Current version] OROM Marvell 88SE9230 - 1.0.0.1008 --> [Available version] - 1.0.0.1024

After choosing 1 - Update Marvell, UBU says:

The system cannot find the file \Mrvl92xx.txt. --> Press any key to continue . . .

This needs fixing!

This thread has been closed.

#4359 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Sat Sep 15, 2018 3:49 pm (Last edited: Sat Sep 15, 2018 4:51 pm)

Tested the new 1.7 rc10, downloaded the patched mmtool 5.2.0.24, and the Intel-RST files

In UBU the 4 - other sata controller is updating ok, (was crashing in the previous 1.7 x versions)

NOW the 1 - Disk controller is updating, but stall after the "file is replaced" and the OMROM IRST DevID 2822 message, nothing happens and doesnt exit ????

the cursor just blink ???

EDIT : just saw the other windows who says : Error in opening the input module file ???

Dang I badly renamed one of the IRST files, there was an hidden space

Sorry ALL is working fine thks for the work

I7-4770k, Asus Z87-WS, 32gb ram, Zotac 1060-6gb Amp, tons of hotswap drives, Antec twelve hundred, Win 10 Pro 64bit for Workstations, 32" Benq BL3200

This thread has been closed.

#4360 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Thu Sep 20, 2018 2:29 am (Last edited: Thu Sep 20, 2018 2:31 am)

OROM Intel iSCSI Boot 3.0.57

westlake has attached files to this post

This thread has been closed.

#4361 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Sat Sep 22, 2018 8:45 pm (Last edited: Thu Sep 27, 2018 11:30 pm)

Hello,

After updating the CPU Microcode with the latest UBU Tool 1.70 RC10.2 my motherboard resets over and over.
I'm using ASUS P9X79 Pro motherboard with Intel XEON E5-1660 v2 ES (CPU Signature 306E4, Microcode Patch 416, LGA2011 v1) from the latest official BIOS P9X79-PRO-ASUS-4801.

My modifications:

- UEFITool used to add uncompressed NVMe module (NvmExpressDxE_4)
- Modded ASUS ME Tool used to update Intel ME Firmware to version 8.1.70.1590 (1.5M)
- UBU used to update EFI Intel PRO/1000 UNDI from version 5.5.23 to 0.0.19
- UBU used to update OROM Intel Boot Agent GE version 1.3.72 to OROM Intel Boot Agent CL 0.1.13
- UBU used to update EFI Marvell SATA AHCI from version 1.1.0.1001 to 1.1.0.1020
- UBU used to update OROM Marvell 88SE9130 from version 1.0.0.1031 to 1.1.0.1002

Up to this point everything works fine... but after the Microcode update my motherboard resets over and over.
I'm using EEPROM programmer and tested it on 5 different BIOS chips (genuine winbond 25Q64BVAIG).

Any ideas?

This thread has been closed.

#4362 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Sat Sep 22, 2018 9:55 pm (Last edited: Thu Sep 27, 2018 11:30 pm)

@FirstEver
Try to update the microcodes using MMTool.

This thread has been closed.

#4363 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Sat Sep 22, 2018 10:09 pm (Last edited: Thu Sep 27, 2018 11:31 pm)

@FirstEver - I never did like any of Asus X79 4801 BIOS, for any board! If you can't get it let me know I will do mod manually, upload BIOS that's OK/bootable with all your other mods and I'll do the microcode for you.

This thread has been closed.

#4364 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Sun Sep 23, 2018 12:40 am (Last edited: Thu Sep 27, 2018 11:31 pm)

@SoniX

Can you tell me how to update it manually?

My modded BIOS (no Microcode update) = WORK

My modded BIOS (UBU Tool Microcode update) = DOESN'T WORK

@Lost_N_BIOS

This is my modded BIOS - BIN file (please update the CPU Microcode only): https://www.firstever.eu/download/BIOS-Modded.zip
This is original BIOS from ASUS - CAP file (clean, please update the CPU Microcode only): https://dlcdnets.asus.com/pub/ASUS/mb/LG...O-ASUS-4801.zip

I would like to learn how to update the microcode :)

This thread has been closed.

#4365 | RE: [Discussion] UBU Tool related Questions, Reports and Suggestions datum

Sun Sep 23, 2018 2:52 am (Last edited: Thu Sep 27, 2018 11:31 pm)

@FirstEver
When updating microcodes, which method was used, UEFIReplace or MMTool?

This thread has been closed.

BIOS Company �

Page 291 of 335 � Page 1 ... 286 287 288 289 290 291 292 293 294 295 ... 335 Page �

Please enter a reason for warning.