Forum - RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions

#421 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Tue May 20, 2014 1:19 pm

Hi guys. Since I changed from 1.2.7 version to 1.3 I have this error message. And even if I get back to the old version. Any solution ?

This thread has been closed.

#422 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Tue May 20, 2014 2:28 pm (Last edited: Tue May 20, 2014 2:31 pm)

@ ThaInfamousMobb:
Welcome at Win-RAID Forum!

Zitat von ThaInfamousMobb im Beitrag #461
Hi guys. Since I changed from 1.2.7 version to 1.3 I have this error message. And even if I get back to the old version. Any solution ?

At first step the UBU tool checks the integrity of the tool files. In your case it obviously couldn't find the file named Z_CPU0.ffs, which should be within the CPUP subfolder of the UBU_v130 folder.
Possible reason: The content of the UBU folder has been changed by mistake.

This is what I recommend to do:
1. Redownload the UBU Tool v1.30.
2. Create a folder in the root of drive C and name it "UBU_v130" (without the quotation marks).
3. Extract the content of the zipped UBU package into the just created C:\UBU_v130 folder.
4. Run the UBU.bat as Administrator again.
5. Navigate to the BIOS file you want to modify.

I just tested it and it worked!

Regards
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#423 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Tue May 20, 2014 4:32 pm

Addon for UBU v 0.1.0. IRST TRIM-in-RAID0 Addon for Intel 6-Series motherboards.
Involved OROM, EFI GUID 90C8D394- and EFI GUID 91B4D9C1-
IRST v11.6.0.1702
IRST v12.7.0.1936
IRST v12.9.0.2006
IRST v13.0.0.2075
IRST v13.1.0.2030

This Addon works only with UBU version 1.3.0 and higher.
To use unpack the archive into a folder with UBU.
Not recommend running file TRIM6 separately from UBU!

This thread has been closed.

#424 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Tue May 20, 2014 7:22 pm (Last edited: Thu May 22, 2014 6:05 pm)

@ SoniX:

Thanks for having published the "UBU_TRIM6" addon, which is supported by the latest UBU tool v1.30.
As a consequence I have updated the start post of this thread.
Please have a look into my refreshed guide and send me your advices via PM.

@ all Win7/8 users with an Intel 6-Series SSD RAID0 system:

Update of my Guide (start post)

Changelog:

added: Use of the new UBU addon named "UBU_TRIM6"
refreshed: "Preparations" chapter of my guide.

I hope, that everything is correct and easy to unterstand.
If not, please let me know it via PM.

Good luck!
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#425 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Tue May 20, 2014 8:49 pm

@ Fernando
Small request.
"Please do not run the file TRIM6.BAT. All updates for "TRIM-in-RAiD0" run the file UBU.BAT".
1) Start UBU.bat
2) Select "1"
3)* If there is an Addon menu item. Select "s" or "S"
4) Select option for updates.

SoniX has attached images to this post

??????.JPG

This thread has been closed.

#426 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Tue May 20, 2014 10:49 pm (Last edited: Tue May 20, 2014 10:50 pm)

@ Sonix:

Done!
To make everything as clear as possible without increasing the length of my guide too much, I have put the additional informations for the "TRIM6" addon users into a "Spoiler".
I hope, that everything is ok for you and the UBU users.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#427 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Tue May 20, 2014 11:22 pm

Zitat von Fernando im Beitrag #466
@ Sonix:
Done!
To make everything as clear as possible without increasing the length of my guide too much, I have put the additional informations for the "TRIM6" addon users into a "Spoiler".
I hope, that everything is ok for you and the UBU users.

Ok. Thank you.
Hopefully, users will understand. :)

This thread has been closed.

#428 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed May 21, 2014 9:58 am (Last edited: Wed May 21, 2014 1:32 pm)

@Sonix,
@Fernando,

I come back on UBU 1.3 , option 5 (MARVELL 91xx infos).
On my PC I get this menu:

HWINFO64 tool detects a "MARVELL 91xx config" data:

So, it seems a similar data, but not exactly the same.
What do you think about ?

ASUS Sabertooth X99/USB 3.1, W10 x64 21H2 NVMe i750, BIOS v4101, CPU Intel i7 5930K, 32GB DDR4, Asus GTX 1660TI 6GB DDR6
ASUS PRIME Z390M-Plus W11 x64 21H2 22000.194 NVMe 970 , BIOS v3004, 16GB DDR4, CPUs: Intel i3-8100 (4 cores) +UHD 630, i5-9400F (6 cores) +GTX 980.

This thread has been closed.

#429 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed May 21, 2014 10:11 am (Last edited: Wed May 21, 2014 1:33 pm)

Zitat von 100PIER im Beitrag #468
So, it seems a similar data, but not exactly the same.
What do you think about ?

The tool HWInfo detects the hardware components of the system, the UBU tool the SATA Controller related BIOS modules.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#430 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed May 21, 2014 10:55 am (Last edited: Wed May 21, 2014 1:33 pm)

@Fernando,
Thanks for the clarification.

My concern is TRIM is not supported currently on a Marvell port on this board.

So, at the moment I observe the combination 'sandwich' (Hardware Controler Version 1.01 + Firmware Controler Version 2.2.0.1125b + BIOS EFI Module 1.1.0.1001 + BIOS OROM 1.0.0.1038 + Driver 1.2.0.1041) does not support TRIM, and I conclude the problem is purely coming from the Driver software because TRIM works with MSAHCI V 1.0.
Am I right to say this issue can't be solved at BIOS level or at firmware level but can be solved only at a purely software driver level ?

ASUS Sabertooth X99/USB 3.1, W10 x64 21H2 NVMe i750, BIOS v4101, CPU Intel i7 5930K, 32GB DDR4, Asus GTX 1660TI 6GB DDR6
ASUS PRIME Z390M-Plus W11 x64 21H2 22000.194 NVMe 970 , BIOS v3004, 16GB DDR4, CPUs: Intel i3-8100 (4 cores) +UHD 630, i5-9400F (6 cores) +GTX 980.

This thread has been closed.

#431 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed May 21, 2014 11:00 am (Last edited: Wed May 21, 2014 1:34 pm)

Zitat von 100PIER im Beitrag #470
Am I right to say this issue can't be solved at BIOS level or at firmware level but can be solved only at a purely software driver level ?

I totally agree with your conclusion, but I am not very optimistic, that Marvell will solve this issue in the near future.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#432 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu May 22, 2014 6:19 pm

@ SoniX:
Thanks for the new UBU v1.4.0, where you have completely integrated "UBU_TRIM6" feature.
This is good news for Intel 6-Series RAID0 users, who want to get TRIM support within their RAID array, because they don't need to download and insert any separate "TRIM6" addon anymore.

@ all Win7/8 users with an Intel 6-Series SSD RAID0 system:

Update of my Guide (start post)

Changelog:

customized: complete guide
totally refreshed: chapter "Update of the Intel RAID ROM/EFI SataDriver modules" with new screenshots

I hope, that everything is correct and easy to unterstand.
If not, please let me know it via PM.

Personal comment:
Since the insertion of "Universal TRIM in RAID0 modded" Intel RAID ROM/SataDriver modules now has been fully implemented by SoniX into his UBU tool, the BIOS modification is now much easier and safer for P67 and Z68 users with an SSD RAID0. So from now on I don't see any need to ask BIOS modding experts for an update of a mainboard BIOS regarding the feature "TRIM in RAID0".
Even BIOS modding newbees should be able to get their favorite version of the TRIM modded Intel RAID ROM/SataDriver module into their AMI UEFI mainboard BIOS.

Good luck!
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#433 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri May 23, 2014 10:02 pm (Last edited: Sat May 24, 2014 10:12 am)

@ SoniX:
Thanks for the new UBU version and the addition of the "Universally TRIM modded" Intel RAID ROM v11.2.0.1006.

@ all:
The new version 1.4.1 has already been tested by me. I was able to successfully replace the original Intel RAID ROM v11.2.0.1527 of my P8Z68-V BIOS by the modded v11.2.0.1527, which now is supporting the TRIM in RAID0 feature.

Update of the Start Post

Changelog:

new: download link to UBU v1.4.1
customized: chapter regarding the insertion of TRIM modded Intel RAID modules

Enjoy the updated UBU tool!

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#434 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri May 23, 2014 10:26 pm

Sonix, is your TRIM mod done via the Universal method or the more 6-series specific method? I ask because I saw a user on here whose motherboard would not report working TRIM (using the TrimTool) with the universal mod, but when he did the mod that was first discovered way back just for his specific 6-series chipset it reported working fine.

This thread has been closed.

#435 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri May 23, 2014 10:59 pm (Last edited: Fri May 23, 2014 11:02 pm)

@ D2theZ
The Universal method. OROM-mod taken >here<, and EFI-mod >here<.

This thread has been closed.

Please enter a reason for warning.