Great tool.
Did some mods with Asus P8Z77 boards (-V, -V LK, -M Pro, -I).
All went fine after lock removal.

Now tried to mod some SuperMicro X9-Bioses, they were recognized, but many modules there are twice. Only first one is changed. But seems to be the right one.

After that i tried some Supermicro X10 and ASAi-Bioses. They are not recognized, but they are Ami Aptio.
Any hints?

Zitat von Fernando im Beitrag #446

---

@ SoniX:
Why doesn't the UBU tool offer to update the Intel VGA ROM to v2180?

---

Zitat von Fernando im Beitrag #446

---

Now I have these questions:

1. Why doesn't the UBU tool offer to update the Intel VGA ROM to v2180?
2. Why does the UBU tool offer to update the Intel GopDriver to v5.0.1037, although it is already within the BIOS?
3. Have I done something wrong?

---

1. VBIOS Haswell for each motherboard has its own individual settings. Look here Intel Sandy/Ivy Bridge and Haswell VBIOS differences and modification
2. It will be necessary to check for a new version. But probably not worth it, because not everyone can know which version of the last one. Can be waived by pressing "0".
3. No. :)

Zitat von elitethem im Beitrag #447

---

If I remember right Fernando SoniX did take out the ability (UBU) to update Haswell motherboards VGA Roms some months ago.

---

Zitat von Fernando im Beitrag #450

---

Do you know the reason why the mainboard manufacturers change the hex codes of the Haswell iGPU OROM modules, although all these iGPU chips are made by Intel and probably physically identical?

---

Zitat von SoniX im Beitrag #449

---

Zitat von elitethem im Beitrag #447

---

If I remember right Fernando SoniX did take out the ability (UBU) to update Haswell motherboards VGA Roms some months ago.

---

Yes, used to be able to update the VBIOS Haswell in UBU. But then it turned out that OROM taken from one motherboard did not work for another. Therefore, leaving the possibility to update only the GOPDriver for Haswell. OROM VBIOS Haswell modified and entered manually.

Edit:
By the way, it became clear that for some OROM VBIOS Sandy and Ivy also need to migrate settings for proper operation of the iGPU.

---

Without the help of the community none of this would not have done.
So Thank you all very much for your help and advice! :)

a report from my update:
-motherboard GA-Z68MX-UD2H-B3
-bios U1E (2013/03/11)
-UBU v127

the order in which I updated the bios of my motherboard - 8,5,3,1,2
the sequence 1, 2, 3, 5, 8 - MMTool error out of memory
update CPU MicroCode OK
flash bios OK - the computer works properly

@ Fernando
Thank you. All is well. Then gather when Add-on for it, we will correct the first post.
Added mirror to download from SendSpace.

@ k.bomb81
Unfortunately the problem of lack of space has long been known. Only one solution, to choose different options for consistent updates.

Zitat von SoniX im Beitrag #455

---

New UEFI BIOS Updater v1.3.0
Change:
1) Added support for EFI SATA Marvell (display only version)

---

@100PIER
Yes. Currently EFI module is not yet updated, just print out the version on the screen.

Edit:
If you have the desire and the opportunity to test version 1.1.0.1007, mode UEFI, I will be very grateful to you.
Attached is a file with the new version, GUID 4331898D-CCB8-4108-898C-A5CC81442B28.