Forum - RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions

#376 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Mar 27, 2014 4:33 pm

Hi all and thank you for this great forum. I have a question: is it possible to add to UBU the Intel RST(e) RAID ROM v13.0.0.2075? I read the manual modding's instructions but I'm too scared to proceed in that way. thank you again

This thread has been closed.

#377 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Mar 27, 2014 5:12 pm (Last edited: Thu Mar 27, 2014 5:13 pm)

@ Shakur92:
Welcome at Win-RAID Forum!

Zitat von Shakur92 im Beitrag #409
is it possible to add to UBU the Intel RST(e) RAID ROM v13.0.0.2075?

If there should be a demand for this special OROM, I am sure, that SoniX will add this Intel RAID OROM v13.0.0.2075.
Maybe you can even use the current UBU version, if you can tell me the GUID start code of the "SataDriver" module, which is within your mainboard BIOS.

Regards
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#378 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Mar 27, 2014 5:31 pm

Zitat von Fernando im Beitrag #410
@ Shakur92:
Welcome at Win-RAID Forum!
Zitat von Shakur92 im Beitrag #409
is it possible to add to UBU the Intel RST(e) RAID ROM v13.0.0.2075?
If there should be a demand for this special OROM, I am sure, that SoniX will add this Intel RAID OROM v13.0.0.2075.
Maybe you can even use the current UBU version, if you can tell me the GUID start code of the "SataDriver" module, which is within your mainboard BIOS.

Regards
Fernando

Thanks, the GUID start code of my satadriver module is 90C8D394

This thread has been closed.

#379 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Mar 27, 2014 6:35 pm (Last edited: Thu Mar 27, 2014 6:37 pm)

@ Shakur92:

Ok, then you can do the following:

Download and unzip the attached file named "SataDriver90.ffs".
Open the UBU tool subfolder UBU\OROM\IRST\13_1 and delete the file named "SataDriver90.ffs".
Insert the downloaded file with the same name into the 13_1 subfolder.
Run the UBU.bat and choose to update the SataDriver to v13.1.0.2030 and you will get the SataDriver v13.0.0.2075.

Good luck!

Fernando has attached files to this post

SataDriver90.rar

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#380 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Mar 27, 2014 8:26 pm

Zitat von Fernando im Beitrag #410

If there should be a demand for this special OROM, I am sure, that SoniX will add this Intel RAID OROM v13.0.0.2075.

I see no reason to add version 13.0 0.2075 in UBU.
Version 13.1.0.2030 is tested and successfully works Z68/77/87.

This thread has been closed.

#381 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Mar 27, 2014 9:14 pm

Zitat von Fernando im Beitrag #412
@ Shakur92:

Ok, then you can do the following:
Download and unzip the attached file named "SataDriver90.ffs".
Open the UBU tool subfolder UBU\OROM\IRST\13_1 and delete the file named "SataDriver90.ffs".
Insert the downloaded file with the same name into the 13_1 subfolder.
Run the UBU.bat and choose to update the SataDriver to v13.1.0.2030 and you will get the SataDriver v13.0.0.2075.

Good luck!

It worked perfectly, thank you

This thread has been closed.

#382 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Mar 27, 2014 9:26 pm (Last edited: Thu Mar 27, 2014 9:29 pm)

Zitat von SoniX im Beitrag #413
I see no reason to add version 13.0 0.2075 in UBU.
Version 13.1.0.2030 is tested and successfully works Z68/77/87.

It was just an idea, if there should be the demand for the modules from much more than 1 user.
A reason for an insertion may be, that the Intel RAID modules v12.0.0.2075 seem to be much newer than the v13.1.0.2030 ones. Furthermore they are from the same development branch as the brandnew and WHQL certified Intel RST(e) drivers v13.0.0.1098.

Zitat von Shakur92 im Beitrag #414
It worked perfectly, thank you

Thanks for the feedback!
It is fine, that it worked this way.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#383 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Apr 10, 2014 9:41 am

UEFITool 0.17.6 is released:

http://forums.mydigitallife.info/threads...ll=1#post898736

Z590/490/390 AORUS Master
Z370 AORUS Gaming 7,
GA-Z170X-SOC Force ,
GA-Z97X-SOC Force ,Core i7-4790K ,G.Skill F3-2933C12D-8GTXDG
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black 1TB
Win 7 SP1 x64;Win 8.1 x64 ;Win 10 x64

This thread has been closed.

#384 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Apr 18, 2014 3:39 am (Last edited: Fri Apr 18, 2014 3:43 am)

USBF secure flash error after adding AsMedia 954 oprom to 990FX bios 2301.

This thread has been closed.

#385 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Apr 18, 2014 10:24 am

Zitat von Pill Monster im Beitrag #419
USBF secure flash error after adding AsMedia 954 oprom to 990FX bios 2301.

Use UBF (USB BIOS Flashback)

This thread has been closed.

#386 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Mon Apr 21, 2014 11:23 pm (Last edited: Tue Apr 22, 2014 7:40 am)

UEFITool 0.17.8 is released...

Edit:
0.17.9....now....

Z590/490/390 AORUS Master
Z370 AORUS Gaming 7,
GA-Z170X-SOC Force ,
GA-Z97X-SOC Force ,Core i7-4790K ,G.Skill F3-2933C12D-8GTXDG
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black 1TB
Win 7 SP1 x64;Win 8.1 x64 ;Win 10 x64

This thread has been closed.

#387 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Apr 25, 2014 1:31 pm

Ingram

Show info

Posts:	5
Registered since:	04.25.2014
Location:	Estonia

Really neat tool you have here! Very convenient.

However I ran into a problem. When I am trying to update both RST and Realtek LAN roms on my bios, I get insufficient space error. Either one of them alone works just fine though.

1
2
3
4
5
6
7
 
ERROR: insufficient space remains to add the file efd652cc-0e99-40f0-96c0-e08c08
9070fc
File Name               : S3Restore
Volume Size Specified   : 0x1B0000 bytes
Required size           : 0x1B0E80 bytes
 
Error in Saving
 

The bios itself can be found at http://download.gigabyte.ru/bios/mb_bios...ud3h-b3_u1l.exe

Is there anything I can do to free up space? And how?

This thread has been closed.

#388 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Apr 25, 2014 2:06 pm

@ Ingram:
Welcome at Win-RAID Forum and thanks for your contribution!

Zitat von Ingram im Beitrag #422
When I am trying to update both RST and Realtek LAN roms on my bios, I get insufficient space error. Either one of them alone works just fine though.

There obviously is a space problem with your specific BIOS and not an UBU tool issue.
Have you already tried to save the BIOS after having updated the first ROM module and to update the next thereafter?

Regards
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#389 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Apr 25, 2014 7:00 pm

@Ingram
Try refreshing in that order - 8, 5, 3, 2, 1.
I update went fine.

This thread has been closed.

#390 | RE: RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Apr 25, 2014 7:56 pm

Thank you, this worked! :-)

This thread has been closed.

Please enter a reason for warning.