Forum - RE: [Discussions] UBU Tool related Questions, Reports and Suggestions

#271 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jan 23, 2014 5:56 pm (Last edited: Sun Feb 08, 2015 5:53 pm)

Zitat von ErfanDL im Beitrag #259
Zitat von ex58 im Beitrag #258
Realtek LAN ROM 2.59 is out.
how to replace this ROM in BIOS ?

As long as the UBU tool has not been updated, it has to be done manually by using the AMI Aptio MMTool.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#272 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jan 23, 2014 8:16 pm (Last edited: Sun Feb 08, 2015 5:53 pm)

Zitat von Fernando im Beitrag #260
Zitat von ErfanDL im Beitrag #259
Zitat von ex58 im Beitrag #258
Realtek LAN ROM 2.59 is out.
how to replace this ROM in BIOS ?
As long as the UBU tool has not been updated, it has to be done manually by using the AMI Aptio MMTool.

thank you Fernando. can you tell me wich GUID number for realtek LAN ROM ?

This thread has been closed.

#273 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jan 23, 2014 11:57 pm (Last edited: Sun Feb 08, 2015 5:54 pm)

What should I do when I have 3 intel PEX? :O
Should I update all to the same version?

This thread has been closed.

#274 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Jan 24, 2014 1:01 pm (Last edited: Sun Feb 08, 2015 5:54 pm)

@ christer12:
Welcome at Win-RAID Forum!

Zitat von christer12 im Beitrag #262
What should I do when I have 3 intel PEX? :O
Should I update all to the same version?

Yes, you can do that. Only one of the ROM modules will be used anyway.

Regards
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#275 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Jan 31, 2014 1:55 pm (Last edited: Sun Feb 08, 2015 5:54 pm)

@ SoniX & Fernando: Many thanks for your excellent work.

I could update all OROMs including CPU microcode of the the ASUS P8P67 (REV 3.1) BIOS 3602 with the UBU v1.1.6.
I used the in the ASUS BIOS inbuilt EZ Flash 2 function for flashing the with UBU modified BIOS.

But since UBU v1.1.7 I can't update the Marvell OROM anymore (starting with an original unmodified BIOS).
The MMTool shows this message:
ERROR: insufficient space remains to add the file 010216cd-9c09-4eb5-b7da-d0a286
5092d4
File Name : ProjectDXE
Volume Size Specified : 0x1F0000 bytes
Required size : 0x1F0E58 bytes
I guess the error is related with the removing of the empty module of the CPU microcode section. That was the change in UBU v1.1.7.

I would be very happy if you could help to get the UBU v1.1.9 working with the ASUS P8P67 (REV 3.1) BIOS 3602.

This is the link for the ASUS P8P67 (REV 3.1) BIOS 3602:
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1...1-ASUS-3602.zip

My current System:
Mainboard: Asus P8P67 Rev3.1, CPU: Intel Xeon E3-1230 & Thermalright HR-02 Macho, RAM: 4x8 GB Crucial Ballistix Tactical LP DDR3L, Graphics: Palit GeForce GTX 1650 Ti KalmX, SSD: 2x1TB Samsung 850 PRO, Blu-Ray:Sony Optiarc BD-5300S, WLAN: Intel Wi-Fi AX 200, Power Supply: HuntKey Jumper 300G planet3dnow-Edition, Case: Thermaltake Level 10 GT, OS: Windows 10 Pro @ 64 bit

This thread has been closed.

#276 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Fri Jan 31, 2014 2:31 pm (Last edited: Sun Feb 08, 2015 5:54 pm)

@ RoughBoy:

Welcome at Win-RAID Forum!
Hopefuly SoniX will read your post and can help you to solve your problem.

Enjoy the Forum!
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#277 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Sat Feb 01, 2014 4:24 am (Last edited: Sun Feb 08, 2015 5:54 pm)

Zitat von RoughBoy im Beitrag #264

This is the link for the ASUS P8P67 (REV 3.1) BIOS 3602:
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1...1-ASUS-3602.zip

The problem in the bios file, not optimized free space.

SoniX has attached files to this post

P8P67-REV31-ASUS-3602_path.zip

This thread has been closed.

#278 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Sat Feb 01, 2014 7:24 am (Last edited: Sun Feb 08, 2015 5:54 pm)

Zitat von SoniX im Beitrag #266
Zitat von RoughBoy im Beitrag #264

This is the link for the ASUS P8P67 (REV 3.1) BIOS 3602:
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1...1-ASUS-3602.zip

The problem in the bios file, not optimized free space.

The following option roms can be removed as they are not used (to get some space):
1b4b:9120
1b4b:91a0

The one that get's used (for Marvell controller) is 1b4b:9172.

This thread has been closed.

#279 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Sat Feb 01, 2014 9:39 pm (Last edited: Sun Feb 08, 2015 5:55 pm)

@ SoniX:
Thank you so much - now UBU v1.1.10 works with the modified ASUS P8P67 (REV 3.1) BIOS 3602.

My current System:
Mainboard: Asus P8P67 Rev3.1, CPU: Intel Xeon E3-1230 & Thermalright HR-02 Macho, RAM: 4x8 GB Crucial Ballistix Tactical LP DDR3L, Graphics: Palit GeForce GTX 1650 Ti KalmX, SSD: 2x1TB Samsung 850 PRO, Blu-Ray:Sony Optiarc BD-5300S, WLAN: Intel Wi-Fi AX 200, Power Supply: HuntKey Jumper 300G planet3dnow-Edition, Case: Thermaltake Level 10 GT, OS: Windows 10 Pro @ 64 bit

This thread has been closed.

#280 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Sat Feb 01, 2014 9:57 pm (Last edited: Sun Feb 08, 2015 5:55 pm)

Actually, the user can remove 1B4B-91A0 and 1B4B-917A, since they are exact copies of 1B4B-9120 and resp. 1B4B-9172 (real controllers and ID). He can go even further if he looks in Device Manager for Marvell Controller and check its DeviceID, thus keeping only one OROM out of 4.

This thread has been closed.

#281 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Sun Feb 02, 2014 12:06 am (Last edited: Sun Feb 08, 2015 5:55 pm)

@ mictlan and lordkag: Many thanks for your answers.
Can you give me a short explaination plz how I can remove 1B4B-91A0 and 1B4B-917A from the ASUS P8P67 (REV 3.1) BIOS 3602?
Many thanks in advance.

My current System:
Mainboard: Asus P8P67 Rev3.1, CPU: Intel Xeon E3-1230 & Thermalright HR-02 Macho, RAM: 4x8 GB Crucial Ballistix Tactical LP DDR3L, Graphics: Palit GeForce GTX 1650 Ti KalmX, SSD: 2x1TB Samsung 850 PRO, Blu-Ray:Sony Optiarc BD-5300S, WLAN: Intel Wi-Fi AX 200, Power Supply: HuntKey Jumper 300G planet3dnow-Edition, Case: Thermaltake Level 10 GT, OS: Windows 10 Pro @ 64 bit

This thread has been closed.

#282 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Sun Feb 02, 2014 8:34 am (Last edited: Sun Feb 08, 2015 5:34 pm)

Easy:

mictlan has attached images to this post

rough.png

This thread has been closed.

#283 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Sun Feb 02, 2014 10:02 am (Last edited: Sun Feb 08, 2015 5:34 pm)

@ mictlan: Thank you again. That looks really easy.

My ASUS P8P67 (REV 3.1) has a Marvell controller 1B4B-9172 like shown in the Device Manager.

So it should be correct to remove 1B4B-91A0, 1B4B-9120 and 1B4B-917A?
I only ask once again to be sure and to prevent any damages in the BIOS.

My current System:
Mainboard: Asus P8P67 Rev3.1, CPU: Intel Xeon E3-1230 & Thermalright HR-02 Macho, RAM: 4x8 GB Crucial Ballistix Tactical LP DDR3L, Graphics: Palit GeForce GTX 1650 Ti KalmX, SSD: 2x1TB Samsung 850 PRO, Blu-Ray:Sony Optiarc BD-5300S, WLAN: Intel Wi-Fi AX 200, Power Supply: HuntKey Jumper 300G planet3dnow-Edition, Case: Thermaltake Level 10 GT, OS: Windows 10 Pro @ 64 bit

This thread has been closed.

#284 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Mon Feb 03, 2014 5:22 pm (Last edited: Sun Feb 08, 2015 5:34 pm)

Hi everybody I'm a newbie, just registered
I've already and successfully modded an updated bios for my Z77 OC Formula, and wanted to do the same for a fiend of mine with the Z77 MPower
Already done it however I need to know how am I supposed to change the .bin extension to .HC0 (required I suppose) like the original bios (7751)
I appreciate your help, tks! :)

This thread has been closed.

#285 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Mon Feb 03, 2014 5:52 pm (Last edited: Sun Feb 08, 2015 5:35 pm)

@ arrow0309:
Welcome at Win-RAID Forum!

Zitat von arrow0309 im Beitrag #273
I need to know how am I supposed to change the .bin extension to .HC0 (required I suppose) like the original bios (7751)

Run the Windows Explorer, do a right click onto the .bin file and rename it to the original BIOS name (inclusive the extension).

Regards
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

Please enter a reason for warning.