cpu000406F1_platEF_ver0B00001B_date#05-05-2016 for BDWe

@plutomaniac

Thank you! :)
Preparing version 1.54 UBU. All changes will be included in the new release. :)

mCodeInfo v0.1.1
Changed check definition microcode.
At the same time checked:
- the start header microcode {01 00 00 00}
- beginning of year (19} or {20}
- full size - 0x30 == size without header, where 0x30 - a header size.
The probability of a false display of about 0.1%, if you view a full BIOS file.

But it is not determined by the old microcode, 2048 KB. Since such microcode no data on the size.

You can download it via the link download UBU.

Dear Fernando,
I have signed up to the site just to thank you and your friends great work. It is obvious motherboard brands wishes to push us buy new hardware every year. But you broke the rulez and helped us to renew what we have without paying more. So thank you so much.

My Story: I had an Asus p9x79 pro mainboard with 4701 bios. I've used Fernando's guide and updated my
1. Intel Raid/Ahci rste rom
2. Marvell Raid/Ahci rom
3. Intel GB ethernet firmware
4. Updated mainboards CPU microcode information

I've just be able to test my Samsung 840 evo ssd. It doubled up on all performance tests while the last one. I am using it on intel 6gbps port. I have another disk on Marvell 9128 controller too. It doubled up on all tests too. Im not sure what more i got yet. But the results showed me WHY ASUS STOPPED PUBLISHING BIOS UPDATES. This made me to think not to buy Asus products anymore.

Hope the rest is not the same.

Thanks for listening

@Sonix :

A suggestion (don't know if the author is Ok) but a great option to add to UBU :

https://www.plop.at/en/bootmanagers.html

https://www.plop.at/en/bootmanager/rom.html

@SoniX

Using UBU to update 2.036 Realtek UNDI EFI, the UEFI option to boot from IPV4/IPV6 ethernet doesn't show up but when I don't update it and leave the stock 2.034 the option shows up. This is using the latest Gigabyte F6 BIOS on GA-Z170-HD3 motherboard.

@rootuser123

Re update the original BIOS file in v1.54.1 and test. It should work correctly.

@SoniX Your test script has fixed the problem now. Thank you.

@Fernando
Thank you. :)
The idea to make UBU in the GUI has been a long time, but to write scripts is much easier, faster and more enjoyable. :)

@all
For testing and optimize the windows, looking for the BIOSes that contains the maximum number of files: EFI IRST (more than 2) and EFI IRSTe (greater than 4 with SATA/SCU/sSATA)

@Sonix
I have done some tests with v1.54.1 GUI
The exit button does not work on my side (only the 'cross' button works to exit the application).
Some screens are blank (LAN, VIDEO).
For SATA sreen i see no 'apply' button.
Here are some screenshoots i got.
Seems i do not succeed to do any modding of this ASUS Sabertooth X99 v3101 BIOS, however with non-GUI interface all is working perfectly.





Hope this help you.
Many thanks again for the UBU fantastic tool.