Skylake microcode 06E3 Rev.4A (?) dated 2015/09/18.

Zitat von ex58 im Beitrag #2005

---

Skylake microcode 06E3 Rev.4A (?) dated 2015/09/18.

---

Did I miss something? UBU can now update X99 Aptio V? So it should work even on Z170?

Zitat von gpvecchi im Beitrag #2007

---

Did I miss something? UBU can now update X99 Aptio V? So it should work even on Z170?

---

For some reason, my one onboard I210 updates from UNDI 6.0.24 to UNDI 0.0.09. Shouldn't it be updating to 6.9.07? On Aptio V.

Zitat von Horstfuchs im Beitrag #2009

---

For some reason, my one onboard I210 updates from UNDI 6.0.24 to UNDI 0.0.09. Shouldn't it be updating to 6.9.07? On Aptio V.

---

Thanks for the reply.
I have an MSI X99S-MPOWER BIOS vM.71

hello to everyone.
i'm a new member and after reading a lot of discussion i decide to register me.
i have a little problem updating bios of my sabertooth x99.
i would like to update it with irst version 14 for nvme support to create raid with 2 sm951 nvme
the ubu works good, it update the driver, but the file that ubu create is not recognized from the ez asus bios updater.
anyone can help me?
thank you
Parrotts
p.s.
sorry for bad english

@parrotts

You've to do via Afudos !!! I hope you know the wright procedure. :)

Zitat von ex58 im Beitrag #2005

---

Skylake microcode 06E3 Rev.4A (?) dated 2015/09/18.

---

hi
thank you for the rreplay
today i've
update the bios with usb bios flash and it works but istill having problem with raid setup
i'm trying to install 2 sm951 nvme in radi 0 on my sabertooth x99 and i have some difficult to do.
the ssd is installed one in m.2 native slot and one in a pcie adaptor in the second slot.
bios see both.
i can install os in both.
i modded bios file to update with version 14 of intel rst driver ( in fact in the advanced mode of bios in intel rapid storage flag it shown version 14 but no disc is detected)
in the nvme configuration they are listed
bus 3 sm951.....
bus 5 sm951.....
but the irst don't see that unit

wath i've missed to do?

Zitat von N6O7 im Beitrag #1913

---

Zitat von Jest im Beitrag #1912

---

I have two ivybridge computers and no matter which microcode is in bios, hwinfo always shows 1B. I think windows have their own micocode patch, so it uses the latest.

---

That's what i was inquiring.
I've this Microsoft update on my machine: https://support.microsoft.com/en-us/kb/3064209 , and HWiNFO64 showed 1B
But my Bios file was still in version 17 and I updated today to 1B with UBU...i just wasn't sure of the result...

---

start /wait wusa /uninstall /kb:3064209 /quiet /norestart
 

2) hide KB3064209 update
3) enable overclocking

For Windows 10 users:
1) delete or rename C:Windows\System32\mcupdate_GenuineIntel.dll in safe mode