sorry for my bad English!

My Mainboard is ASROCK Z170 EXTREME 4 Skylake!
Some bugs in UBU1.36 ...Here are a few Screenshoots!










After each storing the checksum is rotated, so that a flash the Bios is impossible with ASUS, Gigabyte, etc.

AmiAPTIO (V) no Orom support!
Why?

EDIT by Fernando: Post moved into the correct UBU Discussion thread (the other one is reserved for the UBU guide and the announcements of a new UBU version).

@lordlag

Thanks for your advise.
I tested lots of combinations including your suggested v6.6.04 on board and i350-T2.
The test results suggest that v5.5.23 as well as v6.1.16 is the best for all the network ports on my system. I prefer the newer one, v6.1.16.


Actually, I am a little tired, take a rest...

@SoniX @lordkag

I found one thing for updating LAN firmware by UBU v1.33 and v1.36 when I was trying many EFI versions that once updated to the 1st option v0.0.07, cannot be replaced with the 2nd and 3rd options.
As you know, I found it with P9X79 Deluxe BIOS v4801.

Zitat von inuchanbt im Beitrag #1915

---

@SoniX @lordkag

I found one thing for updating LAN firmware by UBU v1.33 and v1.36 when I was trying many EFI versions that once updated to the 1st option v0.0.07, cannot be replaced with the 2nd and 3rd options.
As you know, I found it with P9X79 Deluxe BIOS v4801.

---

@SoniX

Thanks, I didn't know if it should be or not should be.

The fact that there are some problems if the BIOS will be 2 EFI files.

New UEFITool 0.20.8

hi i have a problem with
http://www.gigabyte.com/products/product...x?pid=5001#bios

new bios from gigabyte for this board GA-H81M-DS2 (rev. 2.1)

ubu can't read this bios sata oroms to update it, all other bios can read sata roms to update it only happen to latest version FJ , can you analyze what is happening ? thanks

looks like your sata is not supported at this time! sorry

Zitat von PisToV im Beitrag #1922

---

new bios from gigabyte for this board GA-H81M-DS2 (rev. 2.1)
ubu can't read this bios sata oroms to update it, all other bios can read sata roms to update it only happen to latest version FJ , can you analyze what is happening ? thanks

---

@ Fernando
I have noticed that on motherboards budget segment, the index of H in BIOS is no mode selection RAID, only IDE and AHCI. But files OROM and EFI IRST are in the BIOS.

@inuchanbt

Once again you have posted an interesting chart. It confirms the options in UBU, but Intel broke something after 6.1.16, apparently. You updated with Intel tools and BootUtil chose the right modules for your card, but nothing worked for it after 6.1.16. The BIOS issue seem to be a side effect of it, as there is no problem when combining 5.5.23 with 6.1.16. I will also study it further, but it would be a shame to let this hard testing have no use. You should post it in Intel forums and have them chew on the tables. At least the last one is important, it shows where the problem began.

@SoniX

It is as Jest and N6O7 noted. Microsoft supplies some microcodes by default in mcupdate_AuthenticAMD.dll and mcupdate_genuineintel.dll. The list is attached. A note should be added at first post.