Forum - RE: [Discussions] UBU Tool related Questions, Reports and Suggestions

#1756 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed Jul 29, 2015 7:56 pm

Not sure, that procedure succeeded. i do, so what i read.
Put usb in Slot under the flashback button, that Slot is White market with the flashback button together.
press the button and wait the time the flashback button and the usbStick flashing with lights.
End of flashing with lights on stick and button, only the button lights continiusly. Then i start normaly my pc.

Old bios is running. meantime i upgrade on 4801 bios. But my modded wan`t work.

This thread has been closed.

#1757 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed Jul 29, 2015 8:34 pm

Zitat von TGsWort im Beitrag #1718
Put usb in Slot under the flashback button, that Slot is White market with the flashback button together.
press the button and wait the time the flashback button and the usbStick flashing with lights.
End of flashing with lights on stick and button, only the button lights continiusly. Then i start normaly my pc.

According to my knowledge you have to wait until the USB Flashback lights (incl. the button light) are off.
Look here: https://www.youtube.com/watch?v=ADcdnwMjd_I

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#1758 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed Jul 29, 2015 9:12 pm (Last edited: Wed Jul 29, 2015 10:09 pm)

Ok, i will do it so.
In Clip lights flashing and Ends, lights all out. Here is it not so. I will retry,and give it more time!

Zitat
Probably not. I recommend to insert the TRIM in RAID0 modded Intel RST RAID ROM v12.9.0.2006 and set the BIOS to RST mode.

The 12.9.0.2006 included UBU 1.28beta is trim ready?

thanks

Thomas

This thread has been closed.

#1759 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed Jul 29, 2015 10:33 pm

Zitat von TGsWort im Beitrag #1720
The 12.9.0.2006 included UBU 1.28beta is trim ready?

Yes, but only the module, which is within the TRIM6 subfolder.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#1760 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Wed Jul 29, 2015 11:11 pm

Problem was the Cruzer USB-Stick, this come with his own softwarepack. Other Stick and it works like the Clip.

Zitat
Yes, but only the module, which is within the TRIM6 subfolder.

when i start UBU says "Drücken Sie eine beliebige Taste", i do "enter"
ubu Shows "selection Option for update" with efi irst raid for sata. i press 1

ubu Shows

Intel rst orom and efi SataDriver

1 - update ...
2...
3...
4....
5...
9 - gotoupdate Irse/scu
0- Exit to main menu

enter number:

nothing to see from trim6Folder
1.27 and 1.28beta.

no Change to fail in UBU and i did it wrong an see nothing

This thread has been closed.

#1761 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 12:02 am

Zitat von TGsWort im Beitrag #1722
nothing to see from trim6Folder
1.27 and 1.28beta.

Don't you see the "IRST TRIM-in-RAID Addon" option? It should look like shown here:

If not, I recommend to open the UBU\Modules\IRST\12_9 subfolder and to replace the file named SataOROM.bin by the file named SataOrom.bin, which you can find within the TRIM6\12_9 subfolder.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#1762 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 12:09 am (Last edited: Thu Jul 30, 2015 12:22 am)

@ Fernando
For X79, too, must make access to TRIM-files?

Edit:
Strange. All are silent. I thought that for the X79 is not necessary, and made only for 6-series chipsets.

This thread has been closed.

#1763 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 12:22 am (Last edited: Thu Jul 30, 2015 12:23 am)

So i did befor you it wrote,
And with the other usb-stick system run with new orom.
New Windows is installed.

Thanks!!! For your help.

Thomas

This thread has been closed.

#1764 | RE: UBU tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 1:16 am (Last edited: Thu Jul 30, 2015 1:18 am)

Zitat von SoniX im Beitrag #1714
Zitat von killkernel im Beitrag #1711
Yes plotomaniac, i quote your answer and add a link to my previous post where i explain what CPU micro-code is preferable when overclocking the CPU: [Discussions] UBU Tool related Questions, Reports and Suggestions (112)
That is, for Haswell processors, microcode version 19 is the best for overclocking?

@SoniX
Hello SoniX and yes from my extensive tests of CPU micro-code for Haswell the Rev. 19 is the best CPU micro-code for overclocking.

Cheers,
KK

This thread has been closed.

#1765 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 1:16 am

@ SoniX:
Users with an Intel X79 Chipset system and an Intel RAID0 array may not really need a TRIM modded Intel RAID ROM or EFI RaidDriver module, but the insertion of a TRIM modded module does not harm the system at all.
According to Intel only Intel Chipsets from the 7-Series up natively do support TRIM in RAID0. The X79 Chipsets belong to the C600 Series Chipsets, which are at least 6-Series ones.
On the other hand do the Intel RST RAID ROM modules v11 and up contain the TRIM in RAID0 flag, which indicates, that they do support this feature (look >here<).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#1766 | RE: UBU tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 3:09 am (Last edited: Thu Jul 30, 2015 3:17 am)

Zitat von killkernel im Beitrag #1726
Hello SoniX and yes from my extensive tests of CPU micro-code for Haswell the Rev. 19 is the best CPU micro-code for overclocking.

Hello. Thank You for the work done. I will put a message in front microcode version 19 as "Best overclocking"

@ Fernando
Thank You. The next version UBU, will be able to Trim-in-Raid0 for the X79 chipset.

This thread has been closed.

#1767 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 4:47 am

Zitat von Fernando im Beitrag #1692
It doesn't matter, whether you update the Intel RAID modules or not - they will not be used by your AHCI system.
If you ever should swith from "AHCI" to "RAID" mode, I would prefer the Intel RAID modules v13.1.0.2126.

@Fernando

I'm quoting you to clarify something related to this. Let's say i update those RAID modules to version 13.1.0.2126 as you mentioned. Do they support TRIM? Are they TRIM ready?

My question comes after i've read some posts of yours and your members here yesterday, i got confused. I wanna make sure that if i update them i won't get in trouble if someday i want to change to RAID mode.

This thread has been closed.

#1768 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 10:11 am (Last edited: Thu Jul 30, 2015 10:28 am)

Zitat von zt3 im Beitrag #1729
Let's say i update those RAID modules to version 13.1.0.2126 as you mentioned. Do they support TRIM? Are they TRIM ready?

It depends on the Chipset of the user's mainboard and on the RAID configuration:

TRIM in RAID for SSDs, which are not a member of a RAID array, is natively supported for everyone, provided that an Intel RST or RST(e) driver is running.
The extra feature "TRIM in RAID0" is natively only supported by modern Intel Chipsets from 7-Series up. Older Intel RAID systems from ICH8R up to 6-Series Chipsets need a TRIM in RAID0 modified Intel RAID module within the BIOS. Otherwise TRIM will not pass through the Intel SATA RAID Controller into the RAID0 array.

So the TRIM in RAID0 support of the original Intel RAID modules depends on the special Intel Chipset of the system. If you are unsure, whether your chipset supports TRIM in RAID0 or not, you can insert the modded variant of the Intel RAID module(s). It doesn't harm its functionality.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

This thread has been closed.

#1769 | RE: [Discussions] UBU Tool related Questions, Reports and Suggestions datum

Thu Jul 30, 2015 4:12 pm

By modded variants do you refer to your Modded Intel AHCI and RAID Drivers or to this T option in UBU's?

My chipset is from 7 Series, so i assume i won't get in any trouble if i update to your suggested version, from what've understood.

This thread has been closed.

#1770 | RE: UEFI BIOS Updater v1.29 BETA 1 datum

Sat Aug 01, 2015 1:03 pm (Last edited: Sat Aug 01, 2015 1:04 pm)

SoniX
please, have you a answer for this Problem, see Picture, a little confused for me, i mean ID15A1 are right and not was ASRock or ubu...

morpheus67 has attached images to this post

Intellan.jpg

This thread has been closed.

Please enter a reason for warning.