Since I have Dual BIOS so I took the plunge. I can report EFI IRST SATA Driver 14.5.0.2241 OROM and EFI IRSTe RAID for SATA 4.3.0.1018 OROM works flawlessly on my GA-X79-UD3 motherboard with the latest 4.3.x WHQL Drivers installed on Windows 7 64 bit SP1. No BSODs or crashes so far.

Intel Skylake GOP 9.0.1029

Few days back i came here because i wanted to update my OROM VBIOS (option #2) and i did that with the help of @SoniX which i thank him again for helping me out.

Now, regarding the other options:

Option 1, i get this:



Should i upgrade to the latest - v14.5.0.2241 since i'm running on a Intel 7 Series? I use AHCI mode, don't know if this has something to do with that though.

Option 2: The one i updated already.
Option 3:



I read Fernando saying that if we don't use the Wake-On-LAN option we will notice nothing so i assume this is nothing really important?

Option #7:




In the first post of UBU's thread it says that the Microcode is considered a critical option, although it says that ASRock shouldn't be a problem and since i've a ASRock board i don't know if i should mess with this. It updates from 12 to 1B and from 28 to 29 - option #1, #2 said (for overclockers):



What are your opinions? Thanks in advance.

Thank you very much for the script, tools and guides, it makes this doable for dummies

I normally write a summary text so I remember as I have different builds and electronics at home and office. I find it is easier to just remember where the summary is than what the heck I need to do.

If someone could comment to fix the accuracy and may help others, so I post here.

UBU Tool (SoniX)

Asus maximus hero vi MAXIMUS-VI-HERO-ASUS-1603.CAP (SHA-1 44D6EC975B98531F71FAA31CD799C039E7D4F644)

Select option for update

1 Intel RST(e) OROM and EFI SataDriver: Linked to sata windows driver and for sata communication most likely used. Has an end of life for rst(e) drivers and firmware for motherboard hardware. The best matches are suggested by Fernando, just great guides.

2 Intel OROM VBIOS and EFI GOP Driver: For onboard video and never looked at (if I ever need it I am sure if it just works it is ok)

3 LAN OROM PXE and EFI UNDI - Intel, Realtek, BCM, QCA: UEFI and non-os Lan firmware/instructions. Not required here.

4 Update Intel CPU MicroCode Haswell/Broadwell: Board/cpu interface. (not much info on cpu type vs stability/results)

Zitat von Fernando im Beitrag #1692

---

You can choose the offered latest CPU Microcode update dependent on your CPU settings (overclocked or not). Since SoniX told me recently, that the CPU Microcode update done by UBU is very safe now with all mainboard manufacturers, I will delete the related warning from my guide.

---

Just what i thought. Thank you once again for all the help. :)

I think to build a generator FFS-files microcode in the next version UBU. While only Sandy/Ivy Bridge (LGA1155), Haswell and Broadwell (LGA1150).
Thus, users will select the right microcode.

Thanks so much, needed to update sata orom on my rampage iv extreme. Is there any way you can also add 4.1 sata orom to tool?

EDIT by Fernando: Post has been moved into the correct UBU discussion thread.

Hello,

Is it possible to update the Compatibility Support Module(s) in the bios using MMTool that's included with UBU
I have no idea what version is in my bios, so I have attached it for you to look at
If you have a more recent version, then please send it to me with instructions, or mod the bios I have given you
Either way I would be grateful
Is it possible to update UEFI Module(s) too ?

If it is possible to make these options in UBU, then that would be great !

Thanks,
Biozzz

EDIT by Fernando: Post has been moved into the correct UBU discussion thread.

@SoniX
BIOS refers to a UEFI standard.
But what version of the standard (2.0, 2.3.1, 2.4, 2.5) ?
Does UBU tool can detect easily what UEFI version an AMI BIOS is compliant ?
Thanks for this super tool I appreciate.

EDIT by Fernando: Post has been moved into the correct UBU discussion thread. Furthermore I have customized the title of the post.

Zitat von SoniX im Beitrag #1697

---

I think to build a generator FFS-files microcode in the next version UBU. While only Sandy/Ivy Bridge (LGA1155), Haswell and Broadwell (LGA1150).
Thus, users will select the right microcode.

---

Zitat von zt3 im Beitrag #1701

---

Zitat von SoniX im Beitrag #1697

---

I think to build a generator FFS-files microcode in the next version UBU. While only Sandy/Ivy Bridge (LGA1155), Haswell and Broadwell (LGA1150).
Thus, users will select the right microcode.

---

I'm a little confused about the last version of UBU and the CPU Microcode changes.

In the previous version it updated by himself but now we need to choose:



What's the difference between the "1B" and "19"? Should we choose the newer one = 1B?

---