Hi Sonix.

I've downloaded latest UBU 1.20 where Modules>VGA>2170.bin has been removed. I've followed the link in your release post, but I'm not sure what I'm supposed to download. I've found this post. The Sendspace link allows to download a msi installer and a vbios package, the rghost host only the msi installer. Is there any post with detailed instructions for building correct latest vbios file for i5-2500k on Z68 board?

Zitat von Reducer im Beitrag #1480

---

Is there any post with detailed instructions for building correct latest vbios file for i5-2500k on Z68 board?

---

Where to find Intel BMP? I made a quick search on the web but it seems available only to developers...

Long time since I visited UBU. My motherboard is ASUS P8Z77-V Pro (with UBU-modded 2104 BIOS) and my CPU is Intel i7 3770K. I just checked out the latest UBU 1.20 release and needed to ask some questions:
1. UBU 1.20 release notes state that VBIOS OROM for Ivy/Sandy/Haswell has been removed, but for me it still shows upgrade possibility to OROM VBIOS 2170 and EPI GOP Driver 3.0.1027 when I run UBU.bat. However, I already use those VBIOS OROM and EPI GOP Driver. I cannot find any NEWER HD4000 OROM VBIOS and EPI GOP Driver than the one I already have. They were supposed to be listed in this thread, but they weren't...
2. I have Intel RST RAID ROM 13.5.0.2164 on my Z77 board that works. Will the 14.0.0.2198 ROM work too?
3. Can I update my ASMedia 106 SATA firmware to 3.80 on my ASUS Z77-V Pro? I currently have 0.954 firmware that works. I heard that 3.80 firmware is for Z87+ motherboards only. Will it work on my board?
4. Are there any firmware or OROM BIOS update for ASUS P8Z77-V Pro Atheros WiFi card?

Thanks!

I want to give advice if you are not using integrated graphics from Intel, the update does not unnecessarily OROM VBIOS. According to numerous test results, in most cases, improvements in the noted. And just to update, in order to have a new version, it is meaningless.

i have a z87 pro 4 mainboard from asrock and i modded it with ubu before with great success. now since a friend wants to buy my i7-4770 im thinking of buying an i7-5775C (broadwell) when its released. since you have so much more experience with modding the bios/uefi i have some questions. what would i need from uefi side to support broadwell properly?
microcode (100% i guess but ubu does not update it?)
orom vbios (the recent bios has 2166 haswell only afaik, can i use the 1038 unchanged from the other thread with ubu 1.20?)
anything else beside GOP driver (that is updateable with ubu)

@ General_Probe
Are you sure that your motherboard Z87 Pro4 supports processors 5th generation (Broadvell)?Most likely you will have to buy, in addition to the new processor, a new motherboard on 9 chipset.

Great, thanks!

@Fernando

"Hello rivage,

you can verify the BIOS module update success either very easy by re-running the UBU tool or - even more exact - by opening the modded BIOS with the AMI Aptio MMTool, extracting the recently updated modules, opening them with a Hex Editor and comparing the code with the original module.
If you want to check the version of the inserted Intel RAID ROM/EFI RaidDriver, you can enter the BIOS, set the Intel SATA ports to "RAID" mode, reboot and either hit CTRL+I (if you are booting in LEGACY mode) or entering the BIOS again and looking for the tab "Intel(R) Rapid Storage Technology" (if you are booting in UEFI mode). Once you have verified the version of the Intel RAID Utility (the LEGACY or UEFI one), you have to re-enter the BIOS and to re-set the Intel SATA ports to "AHCI",. before you are trying to reboot into your OS. Otherwise you will get a BSOD."

Hi, it looks like everything is updated when I re-run the UBU tool. I didn't manage to check it out with the second method, I have the "Intel(R) Rapid Storage Technology" tab but I'm not sure what I'm supposed to look at exactly cuz I don't have any numbers, just the multiple lines (disable/enable and so on) of the tab but that's it.

thank you for replying! I won't pm you anymore!

@Fernando,
Is it a missing update (red lines) on post#1 as you refer to v1.19 ?

Hi,

Found a bug in UBU tool 1.2. When you select to update cpu microcode and UBU informs about you already have latest version it then asks to terminate batch job and if you select Y the utility exits prematurely.