@vismut1822 - Happy New Year to you as well!!
Very sorry I did not get to your mod BIOS before you made it, but it's great to see you made your own BIOS mod with great success!

I will grab your BIOS and do the menu/settings unlock
BCLK overclocking was killed a long time ago by Intel So don't get your hopes up for anything there, best you can do is around 102-103 if you get lucky and even this is not suggested
Do you use "My Favorites" menu area?

You didn't leave 906EB or 906E9?

@Lost_N_Bios I don't use My favorites at all

Microcode driver 906EB or 906E9, they were removed from me, but 906ED and 906EC remained

OK, I asked in case I need to remove a menu to make room for more
Yes, I wondered why you did not leave a microcode for one of your older CPU's? It's not needed, especially now that you know mod BIOS works, so was just curious why you didn't leave one of those in there too.
--------------

* Edit @vismut1822 - Missing image >> @ Root of >> Ai Tweaker >> Everything below "Internal CPU Power Management"

You asked about microcodes, why didn't I leave one microcode for one of my old processors.
The thing is, I didn't know exactly what microcode to use for the old g3930. Therefore, I left only the ones that are needed to run QJT2.
The computer started up with it immediately, did not have to throw a jumper on ME_Jumper, did not have to insert the old processor, did not even have to reset the battery. Even the voltage of the motherboard matches the QTJ2 perfectly
------------------------------------------------------------------------------------------
@Lost_N_BIOS Sorry for the missing photo.
I hope you now have time to modify the BIOS as soon as possible
--------------------------------

@LOST_N_BIOS Will you be able to make a modifier within 2 hours?
I just need it very urgently to fully install Hackintosh

Thank you in advance

Ohh, well you should have asked, or looked in Google (ie CPU-world is where I look that up)
From my notes in your folder, for your reference
G3930 - 906E9
i3 9100 - 906EB
8100 - 906EB

New CPU Info
QTJ2- Comet Lake-H R0 6C 2.4-4.3GHz 12MB L3 45W TDP. Locked - 906ED / R0

Jumper only needed if using FPT and FD locked

Sorry, not sure if I will have BIOS done in two hours or not? I will try
May need follow up edits too, but what I'm doing now should not have anything to do with you installing Hackintosh?
* Edit - For MAC/OSX you need MSR 0x1AA + MSR 0xE2 mods done right? Do you want me to do those too?

* Edit @vismut1822, that is incorrect image above, I think you already sent me image of that area (Yes, already have this)
I need image of bottom of the root page, below this menu, not inside of it
Bottom of "Ai Tweaker" need to see everything below "Internal CPU Power Management"

Here is a photo

@vismut1822 - See my edit above about MAC/MSR
* Edit - Above image not enough, I need to see all the way to the bottom of this page, ALL Settings below Internal CPU Power Management

@LOST_N_BIOS Here is a photo of the settings in the settings section below the internal processor power management.

Thanks!
Here, please test this for me real quick before I do rest of BIOS, can you see "Tweakers Paradise" below Internal CPU Power Management now?
http://s000.tinyupload.com/index.php?fil...740813482651503

Do you need to flash it through the programmer? If yes, then it needs bin format, and you have ROM

Or do you need to flash through the proprietary EZ FLASH utility?

I have already cleared the microcircuit and I ran into this
------------------------
In a hummingbird, you can choose ROM. Sorry I'm inattentive
---------------------

@LOST_N_BIOS Bios was successfully flashed.
The "Tweakers Paradise" appeared :)

In the Advanced section, new sections have not appeared yet, and "My Favorites" is. This is normal?

This only test of what I mentioned, thanks Also, thanks for the image inside there too
Favorites will remain, no new menu tabs needed here

There should be maybe a few new things above this setting on that page, but I can't remember what all I added in up to that point.
AVX offset at top of Ai Tweaker page I remember >> Target CPU @ AVX Speed:
Ohh, and BCLK Amplitude + BCLK Frequency Slew Rate + ASUS MultiCore Enhancement + AVX Instruction Core Ratio Negative Offset + CPU Power Enhancement
Can you see all that now too?

@LOST_N_BIOS I don't see such AVX items.
Here are photos of new items.
Half of what you listed, I did not see in the BIOS

Sorry, I didn't see your post above the one with images until now . You cannot flash mod BIOS via EZ flash, only with FPT, programmer, or USB Flashback.
Bin/rom = same/same, rename if needed

You're not showing top, so I can't see about AVX value showing or not. but thanks, looks like AVX Instruction Core Ratio Negative Offset + CPU power Enhancement needs Access Level set too.
Rest I mentioned is there, thanks.

Anyway, this just means once I am done, you will need to send me ALL new images, so I can look through and get any missed that need further edit.
You did not answer me on edit above about MAC/OSX and MSR edits

* Edit - @vismut1822- Here, can you now see >> AVX Instruction Core Ratio Negative Offset + CPU power Enhancement
This, is at top of page in BIOS you already tested >> Target CPU @ AVX Speed:
http://s000.tinyupload.com/index.php?file_id=09740197468563530749
Fixed link >>
http://s000.tinyupload.com/index.php?fil...613977576363507

MacOS account.
There for it you need to set the total amount of DVMT memory to MAX
and patch MSR 0xE2.
But all these points are in the bios itself.
For example, the item is the total amount of DVMT memory, it is hidden, in the section "System Agent (sa) Configuraton)
but about MSR, it is in the BIOS itself
And due to the fact that ME is disabled, macos is quite capricious to it, but this can be solved. Of course, if it worked completely ME. it would be just great
I am most interested in unlocking hidden settings. For example, in the Advanced tab, I counted about 30 hidden sections, including overclocking functions
I am very interested in what is in them (I mean in every hidden section)

OK, then you can do once we're done. Usually though, for MSR 0xE2 this is not just the CFG Lock BIOS setting, you also need to do actual mod inside a BIOS module.
Why did you disable ME??? The guide you showed me didn't say ME needed to be disabled, did it?

Yes, you will have all those menus and settings here shortly. See my edit above again, looks like you missed it
Also, DVMT wont matter, you have internal graphics disabled don't you?

You can see "What is in them" with AMIBCP That's how you counted 30 sections, AMIBCP, so you already should know what is in there