tried with ch341a pro pic tell result

Problem solved with ch341 buied at 6 euro

@pipes80 - Make sure you have everything connected properly, here is guide with images how to setup and use - [GUIDE] Flash BIOS with CH341A programmer
No Detection issue is common, you need to get clip on there perfectly, sometimes takes 10+ tries to get it just right.
Make sure items are close together, so cable is not stretched, and try your best to never let it slide or pop off the chip, that will wear out the clip VERY quickly

Initially on my desktop PC I had to use an additional power supply as described in the guide, I was able, on another PC that I was repairing, to use it without that power supply even if I initially used it then removed it later, I hope it is clear what you I say, it may be that I did not link the clip well.
I have find to create power supply 3 volts on that ch341 guide