Did you load optimal defaults in BIOS, then save/reboot back to BIOS and change all settings to how you had before? if not, do that now.
Sleep is a pain, I wish it was never invented, so dumb and causes so many problems. Anything can cause sleep issues, BIOS itself, ME FW, ANY driver, ANY Windows issue, ANY program etc (HUGE list of stuff that can mess it up)
Is this BIOS version you are using now, exact same one as you've always used? If yes, if you want, I can make you a new BIOS with clean ME FW, but using the exact same ME FW version as originally in the BIOS, that way you can at least rule out ME FW as the cause of this issue, before we carry on.

But, in the mod BIOS, ME FW will be either original 11.0.x, or 11.6 (either way, not same as now), so maybe waste of time to mess with trying to sort that out now.... Well, other than having good BIOS for you to go back to if the mod wont work
So yeah, lets do that, just so you can be sure ME FW is or is not the cause of these issues.

I will try to make that BIOS for you tonight, and get this mod done too!! Sorry so slow, I am always behind, and try to work on 100 things at once.
Plus, I've been discussing part of your mod on another thread to sort out some things about VBT/GOP too before I do the mod.

Good Morning!!
Today I couldn't wake up my PC at first time. I had to do like my previous post. Also when I shutdown my PC, it keeps with black screen and fan on.
Now, I went to the BIOS menu and save Load Optimal Defaults and come back to change all settings as I had before.
I will cross fingers and I will check today. I hope everything is going to be ok.
Talking about ME FW, do what ever you think is ok. I will check it and I will tell you how it works.
You don't have to say I'm sorry, I know you are doing your best to have my BIOS ok, and I have to be grateful to find a person like you who wants to help me.
THANK YOU!!

@Lost_N_BIOS I did like I posted before and at first shutdown my PC keeps on with black screen and fan running (like I told you before).

Edit (at 16:00): I have just switched on my PC and it makes 2 beeps and show me the following:

"Error 00CE: Machine Type or Serial Number is INVALID"
"Manufacturing Boot Sequence will be taken if not selection is made"

Hi @Lost_N_BIOS
Any news about the modding?

Hi @Lost_N_BIOS

Sorry for make you loose your time. My bios was completly broken. I had my BIOS ME Region wrong from the beggining and for whatever reason the BIOS ME Repositories was not working well on my pc.
I had to take stock BIOS, extract Me Region and insert it on my original BIOS.
Now I'm sure that everything is working correctly. PC start quickly, no standby problems and ME Analyzer check was ok.
I did the Re-key needed check and was False
Now I'm sure my BIOS could be modded.
I leave attached my bios working file, extracted with programmer 1.30BV.
Could you mod my bios to 7ºGen now?
I hope you can help me.
Thanks!

@Lestero - Sorry for the delay! I am working on BIOS now, but for the minute, I've hit an issue with padding files missing and rearrangement of modules mid-edit (doing GOP Update)
The rearrangement is probably a non-issue, but often when padding is removed above something, it can = brick. Once I get all things updated, and test swapping in updated modules a few different ways, I will see if I can work around these issues (mainly the padding issues)
If I can't, you will just have to test 2-3 BIOS maybe, and see if any boot or all brick etc. If all brick, then you can't do this mod on this system, due to this issue.
Here, see what I am talking about. On left is last BIOS you attached (matches stock in what we're discussing here), and on left is three different edits to update GOP ONLY - MMTool 52, 507, and UBU edited)

Ok. Thanks.
Waiting for the file to try a flash.

@Lestero - The bad part here is, you can only have one microcode in this BIOS, so you can't test if BIOS bootable/OK with older CPU first.
So we wont know if brick/fail is due to padding stuff I mentioned, or just bad mod/not happening etc.
So, here is three BIOS to test for now Luckily you have programmer! Put in new CPU, and be ready for all to fail - ie be ready for recovery once done testing!!
* edit - New link - http://s000.tinyupload.com/index.php?fil...561297089091975

Don't put back in old CPU, or recovery to known good BIOS, until you tested all three of these BIOS. If all three fail, then program back in your last known good dump and put back in old CPU.
I will then try to work around this padding issues, so we can see if that is the cause of the problem or not.
OR!! If you want, I can first swap back in old CPU microcode to these same three BIOS, then you can re-test all three with old CPU and let me know which are OK and which fail to boot.
If you'd be up for that testing round too?

Ok. I will try and tell you if all works, 2, 1 or none.
If some works I will test stability.
Cross fingers.
Thanks!

@Lestero - Sorry, I forgot to mention! After programming in first BIOS of these, please do the following to reset ME FW state >>
Remove ALL power from the board, main battery, power cable, programmer etc (CMOS is OK) Then press power on button for 10-15 seconds, then let sit one minute with zero power
Then you can plug in battery/PSU and start testing. This only needs done once, after first programming, due to ME 11.0 >> 11.6

Lost_N_BIOS - I tried the 3 bios files and all of them had the same behaviour, black screen, nothing more. With others BIOS the PC reboots 1 or 2 times and some of them works, but with this 3 BIOS I got only black screen, like in the original BIOS with kabylake cpu.
So nothing It's a pitty.
I will try to keep this CPU with the Lenovo v510z BIOS just to try to not touch more on the CPU pins (that are just a little blended). With v510z BIOS I got all working except stability, and sometimes I have to reset cmos to get the pc boots on. (it is a H110 BIOS against mine H170 chipset), but works.
Thank you and waiting for more files to try.

Thanks for testing! I assumed that might be the case, due to this padding stuff I showed in that image. If you don't mind, lets confirm
Please put back in old CPU, and then do same test with these three BIOS. This is same BIOS set, but has your other CPU microcode instead, if these all three fail too, then we know for sure the fault is due to the padding stuff
http://s000.tinyupload.com/index.php?fil...871928713417106

Ohh no!! You have bent CPU socket pins??? That's not good, this can always cause failures on it's own Try to be more careful and gentle when swapping CPU's!!!
If these all fail too, do you want me to try and work around the issue, so it's proper and should "maybe" work, or do you want to just go ahead and use the v510z BIOS you mentioned?
ON that, I wonder why it would be unstable? Maybe ME FW SKU, since you mentioned H110/H170. We could change that and test to confirm later if you wanted

@Lost_N_BIOS - If you don't mind I prefer to change CPU from socket as less as possible, so I would prefer to try with another y910 mod or to try with v510z bios mod.
What I don't know if serial number or UUID and other this things matters on stability cause I can't see this things on my original bios (I think are missing).
I attack you a v510z bios, and if you think that it could be possible a good mod for my pc, I will try (perhaps you have to change something related with H110 to H170 because also I feel a little less perfomance).


Anyway, If you want I take the new CPU and I put the old one. Up to you, you tell me.


Thanks.

@Lost_N_BIOS - Ok. Forget it about v510z. I swap CPUs and now I have my old SkyLake CPU on my PC. I had to put and remove de CPU tree times to finally get the CPU well connect with the pins.

First bios boots and seems to work well (MM57GOPVBTME116.bin).

I will try the others and I will tell you.
----------------------

@Lost_N_BIOS - I tried 3 versions and that was the result:

1-MM57GOPVBTME116.bin works fine, quick boot, no problem with suspend mode, no problem rebooting, and powering off.
2-MMGOPVBTME116.bin boots but it is unstable, problems trying to suspend, reboot or powering off (black screen).
3-MYGOP1046VBTME116.bin it's more stable than 2 but suspending system hungs and when I manually have to power off the PC when PC boots it show UUID, machine type and model unknow.

Hope It helps to know where is the problem.

@Lestero - Serial and UUID do not matter for stability, and we can fix those later if you used up using some other model BIOS. oOu should see these in BIOS Main page and or with system info / DMI tools like Windows system info, or HWINFO64 etc
Man, so sorry again to hear your socket pins are not good! I hate how easy they are to bend! I would fix them if I was there, and if they were fixable of course and not broken off

Great! If #1 MM57GOPVBTME116.bin works all OK with old CPU, then same name one (MM57GOPVBTME116uC.bin) should work with new CPU and matching BIOS name from first set.
Did you move CPU around and keep trying, due to the broken pins? Maybe some pins broken here works ok broken or missing for old CPU but is critical to function for new CPU?