only a thing, hardware monitor in new advanced menu no work nut it's not a big problem

Yes, that is expected, it's supposed to be hidden, thus not configured to be functional. This is modern BIOS, so I'm sure MSI already has functional hardware monitor in normal visible area of the BIOS

i have try to enable a thing but i can't enable because take a bios freeze after enable that option, is sa loadline calibration in digit all

Then edit is wrong, or you need to do both setup PE32 + AMITSE/SetupData
Suppress If {0A 82}
0x817C8 QuestionId: 0x1165 equals value 0x0 {12 06 65 11 00 00} << FF
0x817CE Gray Out If {19 82}
0x817D0 QuestionId: 0x115D equals value 0x1 {12 06 5D 11 01 00} << FF

Test ^^by itself, then if no setting is visible add below edit on top of above edit >>

AMITSE/SetupData edit is at BODY >> (27 11 ID found at 77B70h + 15 bytes >> Change 09 >> To >> 0F)


Or, do you mean, you made it visible, and all OK, but when you change setting it freezes?
If yes, this, then you need to test all those options (1-8), maybe only some freeze?
If all freeze, then hide this setting back, you can't use it

no, when oppen oc tab in bios, i try how you have write you
----------------------

which i can edit to leave advanced menu enable from you?
maybe for mesasge in pic then no work?
you have extract "as is" the setup file? truth?

Wow, sorry, but comment at #80 (First one, since I'm merging this now). I don't understand what you mean at all

For second question + image, you can edit any thing there you want, my edits will remain (all those modules extracted are already in BIOS)
The one without M at end of name are the stock module extract, then I put M at end of file name for "Mod"
If it's less confusing for you, copy the mod BIOS I sent you to another folder, then extract your own modules and edit them how you want, the unlock I did will be in there already by default like a stock BIOS

Yes, I extract Setup PE32 As-Is almost always, you see in file name, it does not say "Body" (only for AMITSE or AMITSE/SetupData I use BODY)
In your image about DOS Signature invalid (also wrong size), that is not BIOS I sent you, setup PE32 is not that size >> Correct size (As-Is) >> 1CB284h (1880708) >>
Right click circled PE32, select extract/replace As-Is, this is "Setup PE32 As-is"



* Edit - This how you should extract and replace, Setup PE32 As-Is >>



With files I sent you, you have to do how I showed here for Setup PE32, since I sent you as-is extractions
For AMITSE/SetupData BODY similar, expand to exact module inside, then select it, choose replace BODY

So, you inserted something wrong it looks like, or made some incorrect addition to increase the size etc?

Probably best for you to take my mod BIOS as a whole, put in new folder, then extract your own stuff for edit, that way it's named how you want and how you are used to extract/replace, then no confusion

i have solved, i'll replaced body but i have replaced as is for good work

See my edit above, maybe I explained it better in edit with 2nd image too.
Yes, however you normally are used to extract/replace for anything, you can do that way, just don't use the extracted files I sent you *unless/until you understand how I extracted them
Otherwise, just take mod BIOS I sent you to new folder, then extract however you want, edit, then replace how you are used to doing

I always do Setup PE32 As-Is except when it's "Insyde BIOS" then I extract BODY of Setup PE32, because then it can be dropped directly into IDA for assembly/disassembly work

I always extract AMITSE PE32 or AMITSE/SetupData as BODY (after expand down to exact module, then select it), no reason for this, just what I am used to doing always, but in some cases it's best to have file from here as BODY, so I got in habit of doing these BODY

Did you use Ida assembly?

Yes, I do use IDA assembly tool for some editing, but never for any AMI BIOS edits, mainly on Insyde BIOS I use IDA, or other EXE tools I use IDA on sometimes too

I tried to enable the advanced voice on the new version of the bios, I did not succeed with the instructions you sent me in the bios you modified, I am attaching amitsesetupdata and body setup

@Lost_N_BIOS solved, change formid for mem patchid and I have follow your instruction...thx again

@Lost_N_BIOS In that menu that I managed to make visible, the memorypatch had changed FormID, I tried some settings but it seems that none of the ones I tried can result, in the sense that it does not apply any changes
is this possible?

@pipes80 - Sounds like you did not do mod correctly. To move/swap a menu, you have to change MUCH more than just the formID in Setup PE32.
There is setup PE32 edit + AMITSE/SetupData edit changing many things in the element area for the setting you want to swap in, from the element for the setting you are moving there.
This is in-depth edit, takes a long time to do because all the data you need to collect and write down first. It is not simple or easy mod to do

*** I already made this mod BIOS for you at post #73 *** AND included my notes, and before/after files there
Do you mean there is already new version of the BIOS? If yes, I will have to redo edit, if you can't figure it all out from my notes and the guides/info below
For the new BIOS version, you will have to collect all info again as I outlined in all my notes in each place you see them, because all that info/data may not be same in new BIOS version (often different offsets or variables etc, so you will need to start over, not use same info/data)

Here in both these posts I show how to do this, and how to collect the data needed to do the edit.
Also, at end of first link/post, in spoiler there is link to the guide I used to learn about this from user here named Mov AX, 0xDEAD (Also linked in middle of second link's posted info)
msi z97 pcmate unlocking advanced and chipset menu (2) (Post #22)
[OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (16) (Post #234)

in fact I said that the formid has changed in the new bios compared to what you had modified me, I was able to view all the menus as you did, and as in your bios version some settings I tried do not change the settings, for example the vcore neither is the processor frequency changed