@pipes80 - In post #45, nothing is clear. You need to tell me test results of each BIOS by post number, and what folder from each link
For example, post #39 has two BIOS, which BIOS in what folder does what?
In post #37, there is two links, with two BIOS each. In first link, what BIOS from what folder does what, same for second link?
I cannot answer any questions until I know the answers for all this clearly, and all at the same time for all BIOS

Post #37 >>
Link 1 -
Folder one (Name?) = Result
Folder two (Name?) = Result

Link 2 -
Folder one (Name?) = Result
Folder two (Name?) = Result

Post #39 >>
Folder one (Name?) = Result
Folder two (Name?) = Result

As for your question at end of post #45, sorry, but it's not clear what you are asking me. Not sure if that is even a question?
Yes, sorry, we have some translation issues here

What is in image?? Were your able to unlock DC Loadline settings you wanted finally?
You're welcome! I hope the new image and color coded info on post #44 helped you more to understand about editing AMITSE/SetupData

Zitat von Lost_N_BIOS im Beitrag #46

---

@pipes80 - In post #45, nothing is clear. You need to tell me test results of each BIOS by post number, and what folder from each link
For example, post #39 has two BIOS, which BIOS in what folder does what?
In post #37, there is two links, with two BIOS each. In first link, what BIOS from what folder does what, same for second link?
I cannot answer any questions until I know the answers for all this clearly, and all at the same time for all BIOS

Post #37 >>
Link 1 -
Folder one (Name?) = Result
Folder two (Name?) = Result noname

Link 2 -
Folder one (Name?) = Result
Folder two (Name?) = Result

Post #39 >>
Folder one (Name?) = Result
Folder two (Name?) = Result

As for your question at end of post #45, sorry, but it's not clear what you are asking me. Not sure if that is even a question?
Yes, sorry, we have some translation issues here

What is in image?? Were your able to unlock DC Loadline settings you wanted finally?
You're welcome! I hope the new image and color coded info on post #44 helped you more to understand about editing AMITSE/SetupData

---

I can't enable this option you can see pic
------------------

nothing to do, i can enable that option in the picture

@pipes80 - As mentioned, I need to know results of all BIOS (37 x4 + 39 x2), using BIOS in post #9 may have unnecessary edits in it
Without this, I can't do any edits, and all info I give you may be too much, incorrect etc. And we'll go on for days again until we get it right, best for you to test all those BIOS and give me the info I need so I can tell you for sure which type of edits are needed on this BIOs.

For the option you mentioned above, that exact DC Loadline (out of the x6), can you see already this menu >> Platform Voltage Overrides?
If yes, you just need to unsupress this option in Setup PE32 and then test and see if you can see in BIOS or not.
Then if you still cannot see it, make access level edit at AMITSE/SetupData

I'll try all bios but I can't see that mentioned option
------------------------

Bios 1 from post #37: bios no give CPU, storage information and freeze at opening tabs.
Bios 2 from post #37: work fine and test item option is accessible
Bios 1 from post #39: no work and freeze at openings tabs.
Bios 2 from post #39: work fine and test item option work and is accessible

--------------------

Zitat von Lost_N_BIOS im Beitrag #49

---

@pipes80 - As mentioned, I need to know results of all BIOS (37 x4 + 39 x2), using BIOS in post #9 may have unnecessary edits in it
Without this, I can't do any edits, and all info I give you may be too much, incorrect etc. And we'll go on for days again until we get it right, best for you to test all those BIOS and give me the info I need so I can tell you for sure which type of edits are needed on this BIOs.

For the option you mentioned above, that exact DC Loadline (out of the x6), can you see already this menu >> Platform Voltage Overrides?
If yes, you just need to unsupress this option in Setup PE32 and then test and see if you can see in BIOS or not.
Then if you still cannot see it, make access level edit at AMITSE/SetupData

---

@pipes80 - Please use edit button to add more questions, info etc. No need to make multiple posts in a row, thanks!

Thanks for info at #57! Sorry, I thought there was two each BIOS in each link at 37
So, BIOS from second link works fine, just same as BIOS #2 from post #39, and in both the option is visible?
If yes, then only setup edit is needed, at least for that setting we messed with at that time (no AMITSE/SetupData Edit needed - BIOS at post #37 was setup PE32 edits only)

So, you cannot see this >> Platform Voltage Overrides?
How far into this menu string can you see? >> Advanced >> OverClocking Performance Menu >> Platform Voltage Overrides

If you can only see >> Advanced >> OverClocking Performance Menu (But no platform voltage overrides), then this submenu needs unsuppressed,
Then test ONLY that change, then if still no platform voltage override, then you need to do Access Level Change for this menu

Suppress If {0A 82}
0x50C7E QuestionId: 0x2EF equals value 0x0 {12 06 EF 02 00 00} << Change this to FF Then test ONLY this change - Or, enable >> OverClocking Feature << Then you do not need to do this unsuppress edit on setup
Maybe only AMITSE/SetupData edit, IF you do not see it after you enable this option

0x50C84 Ref: Processor, VarStoreInfo (VarOffset/VarName): 0xFFFF, VarStore: 0x0, QuestionId: 0x2F6, FormId: 0x27AB {0F 0F 66 1C 67 1C F6 02 00 00 FF FF 00 AB 27}
0x50C93 Ref: Ring, VarStoreInfo (VarOffset/VarName): 0xFFFF, VarStore: 0x0, QuestionId: 0x2F7, FormId: 0x27AD {0F 0F 69 1C 6A 1C F7 02 00 00 FF FF 00 AD 27}
0x50CA2 Ref: GT, VarStoreInfo (VarOffset/VarName): 0xFFFF, VarStore: 0x0, QuestionId: 0x2F8, FormId: 0x27AE {0F 0F 93 1D 94 1D F8 02 00 00 FF FF 00 AE 27}
0x50CB1 Ref: Uncore, VarStoreInfo (VarOffset/VarName): 0xFFFF, VarStore: 0x0, QuestionId: 0x2F9, FormId: 0x27AF {0F 0F AC 1D AD 1D F9 02 00 00 FF FF 00 AF 27}
0x50CC0 Ref: Voltage PLL Trim Controls, VarStoreInfo (VarOffset/VarName): 0xFFFF, VarStore: 0x0, QuestionId: 0x2FA, FormId: 0x27B3 {0F 0F 64 1C 65 1C FA 02 00 00 FF FF 00 B3 27}
0x50CCF Ref: Platform Voltage Overrides, VarStoreInfo (VarOffset/VarName): 0xFFFF, VarStore: 0x0, QuestionId: 0x2FB, FormId: 0x27B0 {0F 0F F6 1C F7 1C FB 02 00 00 FF FF 00 B0 27}

If the above does not make it appear, then you need to edit AMITSE/SetupData to change this submenu's Access Level to Supervisor
Use QuestionId: 0x2FB to locate it (FB 02) >> F6 1C and F7 1C will be near it. Change 15th byte after FB 02 from 01 >> To 07
Correct one is located at 0x1BAF0h if AMITSE/SetupData submodule is extracted via BODY

I have modded but no work, I can't enable and I can't see the option.
the menu overclocking performance menu is not visible

@pipes80 - OK, sorry, I assumed you could see >> overclocking performance Menu, let me check it out.....
Ahh! I forgot, MSI hides real advanced BIOS (That contains Overclock Performance Menu), and gives you limited tiny Advanced like OEM - garbage! Show me image of "Root" of advanced, so we can confirm before I do anything.
I will have to replace some submenu you don't use, or can't see, that is within a section of the BIOS that you CAN see already.

Normally, for many MSI BIOS, I do this swap with >> OC >> Memory PatchID Information << Can you see this, and if yes, do you use it / care if I replace it with the huge hidden advanced menu?
If you cannot see it currently, then OK, you don't use So I can use it like I normally do

I do not think I see it or even use it, if you want to change well at the max return to another bios. if you tell me how, I'd like to understand. thank you so much
-------------------

with RU software, i have find in setup, bios lock 0xc3e, there is 02 i have change in 00, but 02 is locked or unlocked?
i hope can understand me

@pipes80 - OK, I will do the edit, but I can't explain how to do it, I would need to write out a huge guide as it's a very in-depth edit.
I left my notes in two places while doing this edit, in first link spoiler, at bottom of notes, there is a link to guide about all this in Russian from Mov AX, 0xDEAD)
msi z97 pcmate unlocking advanced and chipset menu (2) (Post #22)
See also, non MSI, Aptio V example here - [OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (16) (Post #234)

About BIOS Lock - This is stored in NVRAM at offset 0x17 inside VarStore: 0x17 (yes, same varstore ID as actual offset) - this varstore = PCHSetup 4570B7F1-ADE8-4943-8DC3-406472842384
BIOS Lock is NOT at 0xC3E for anything you would change in RU program. In RU, you would make change at 0x17 inside PCH Setup at GUID noted above

0xC3E is the QuestionID ONLY, this is used to locate and make changes in AMITSE/SetupData ONLY
This only changes AMITSE/SetupData defaults (does not change setup PE32 defaults, or ANY NVRAM defaults - this change would = half of what AMIBCP would change, it also changes NVRAM)
On AMITSE/SetupData body 3E 0C is located at 0x50270h and the fail safe / optimal defaults are both 00 (See image below, new image, but same one I showed you in post #10)

Is this?

same menu i can watch in amibcp, this amibcp work only with bios modded on hex method
----------------------------

Zitat von Lost_N_BIOS im Beitrag #53

---

@pipes80 - OK, sorry, I assumed you could see >> overclocking performance Menu, let me check it out.....
Ahh! I forgot, MSI hides real advanced BIOS (That contains Overclock Performance Menu), and gives you limited tiny Advanced like OEM - garbage! Show me image of "Root" of advanced, so we can confirm before I do anything.
I will have to replace some submenu you don't use, or can't see, that is within a section of the BIOS that you CAN see already.

Normally, for many MSI BIOS, I do this swap with >> OC >> Memory PatchID Information << Can you see this, and if yes, do you use it / care if I replace it with the huge hidden advanced menu?
If you cannot see it currently, then OK, you don't use So I can use it like I normally do

---

@pipes80 - Please use edit function to add more info, images, questions etc to a post if you want to add more and no one has replied yet, please, and thanks!
Yes, that is correct in RU for BIOS lock. Changing it there only changes the current live applied value

When I make advanced menu visible to you, you do not have to worry about stuff that is not relevant to you or your CPU (iGPU), you can ignore it.
But yes, if you want to waste more time, and do extra edits for no reason, you can set Access Level to "Show NO" and then it will not be visible.

Sorry, I do not understand your AMIBCP image and comment. I don't use AMIBCP for any edits, unless I need to rename something (like Advanced to Advanced 2, or change help menu info/comments etc)

you asked me what you could remove to add that CPU settings menu and I told you that you could also remove the integrated GPU section as I have neither the processor with integrated graphics nor the motherboard that can connect a monitor

Ohh, OK, sorry I didn't know why you were mentioning that, thanks Already decided, will do >> Memory PatchID Information (as per my usual edit on this)
Please be patient, this takes long time (few hours sometimes), and I need time where I can focus only on that for a while. I will try to do soon