Please see edits above In files I sent, there is no "replace PE32 BODY", only replace PE32 As-Is and that only applies to Setup PE32.
AMITSE/SetupData must be expand down to SetupData and then that exact module selected and replaced as BODY. Send me the file you edited and flashed, I will tell you what was wrong
Did you test the setup edit only by itself? Even if you tested earlier, before I sent you files. If yes, what happened with that ONLY?

What?? Sorry, what you mention about OC section, not sure what you mean? Or what BIOS you are using at that time etc.

Zitat von Lost_N_BIOS im Beitrag #31

---

Please see edits above In files I sent, there is no "replace PE32 BODY", only replace PE32 As-Is and that only applies to Setup PE32.
AMITSE/SetupData must be expand down to SetupData and then that exact module selected and replaced as BODY. Send me the file you edited and flashed, I will tell you what was wrong
Did you test the setup edit only by itself? Even if you tested earlier, before I sent you files. If yes, what happened with that ONLY?

What?? Sorry, what you mention about OC section, not sure what you mean? Or what BIOS you are using at that time etc.

---

Zitat von Lost_N_BIOS im Beitrag #31

---

What?? Sorry, what you mention about OC section, not sure what you mean? Or what BIOS you are using at that time etc.

---

First image "Setupdata.bin" this is not setupdata anything, this is setup PE32, sounds like you are not replacing something correctly still.
Yes, I know what OC section of the BIOS is

Since you did not send me BIOS you edited to check.... Are you flashing stock BIOS mod with M-Flash, or are you flashing FPT mod BIOS region? If FPT mod BIOS region, please send me your original FPT Dump, I will edit it.
If stock BIOS flash via M-Flash, let me know, I will make you two BIOS with setup edit to test something out about not being able to enter OC section of the BIOS

Zitat von Lost_N_BIOS im Beitrag #33

---

First image "Setupdata.bin" this is not setupdata anything, this is setup PE32, sounds like you are not replacing something correctly still.
Yes, I know what OC section of the BIOS is

Since you did not send me BIOS you edited to check.... Are you flashing stock BIOS mod with M-Flash, or are you flashing FPT mod BIOS region? If FPT mod BIOS region, please send me your original FPT Dump, I will edit it.
If stock BIOS flash via M-Flash, let me know, I will make you two BIOS with setup edit to test something out about not being able to enter OC section of the BIOS

---

Yes, but how you replace is the issue here I was thinking. And the file names, and folder names you are using to keep files in are incorrect (As I outlined above), so I'm sure this is causing some confusion on yoru end vs the actual BIOS and what I describe etc

Please send me the BIOS you flashed that messes up the BIOS, first one you made after I sent you files, then I can see if you are replacing wrong or not.
The issue may be the setup edit, but I need to check what you're flashing first to rule that out. MSI BIOS picky sometimes, so setup edit may need to be different, but I can't tell you for sure until I see what you flashed (or I send you stock BIOS I edited and you test and get same result)

This nothing to do with BIOS lock, that only blocks you from flashing if enabled.
So, are you going to send me your edit so I can check if you inserted my files I sent correctly, or do you want me to just make same edit and send you BIOS and you test and let me know if same outcome or not?

Zitat von Lost_N_BIOS im Beitrag #35

---

Yes, but how you replace is the issue here I was thinking. And the file names, and folder names you are using to keep files in are incorrect (As I outlined above), so I'm sure this is causing some confusion on yoru end vs the actual BIOS and what I describe etc

Please send me the BIOS you flashed that messes up the BIOS, first one you made after I sent you files, then I can see if you are replacing wrong or not.
The issue may be the setup edit, but I need to check what you're flashing first to rule that out. MSI BIOS picky sometimes, so setup edit may need to be different, but I can't tell you for sure until I see what you flashed (or I send you stock BIOS I edited and you test and get same result)

This nothing to do with BIOS lock, that only blocks you from flashing if enabled.
So, are you going to send me your edit so I can check if you inserted my files I sent correctly, or do you want me to just make same edit and send you BIOS and you test and let me know if same outcome or not?

---

Max compress, upload to any free file host. You don't need to quote me every reply, it's only us talking
Thanks, I will check and let you know. If files are in there OK, then I will make you BIOS to test with different setup edit, in case that is the issue, then if it's OK, I will show you that edit method instead (It's just different unsupress method)

What BIOS did you stick these into? I have not checked yet, but I sent you files from A3

* Edit @pipes80 - OK, looks good, no issue with your replacement edit! However, what you sent has issues with edit and build/test method!
First, you have stock Setup PE32 in there, and ONLY mod AMITSE/SetupData in there <<< And in this, you have edited Wrong setting (OC Retry Count = BB 0E >> Should be one under BA 0E)
First, you need to edit setup PE32 ONLY, and test that by itself. Cannot have AMITSE/SetupData edit only. After test of Setup PE32 changes only, then, if setting not visible, you ALSO edit AMITSE/SetupData along with the Setup PE32 edit in there too

So, since we still know nothing here, don't know if the setup PE32 method I showed you is causing issue, or how you were trying edits backwards, please test this BIOS below
http://s000.tinyupload.com/index.php?fil...854084588074618

Can you enter BIOS? If yes, can you see OC Section, and enter it? If yes, inside OC, can you now see Test Item 5713648? Or, does BIOS freeze once you enter OC section?
If you can see, and enter OC, but still do not see the setting, or it frrezes inside OC, let me know and I will add correct AMITSE/SetupData on top of this.
If you cannot enter BIOS, or OC Section, then we know unsupress needs done other way (I will show you)
Please answer all questions above, one by one, thanks

* Edit 2 - While I'm here, just in case above setup only edit fails, and then we know why, here is other way to unsuppress this setting, and BIOS to test
Same questions >> Can you enter BIOS? If yes, can you see OC Section, and enter it? If yes, inside OC, can you now see Test Item 5713648? Or, does BIOS freeze once you enter OC section?
If you can see, and enter OC, but still do not see the setting or it freezes inside, let me know and I will add correct AMITSE/SetupData on top of this.

Here is how this one is edited vs/different than the way I showed you earlier- Files all have same name as stock, don't mix them up
http://s000.tinyupload.com/index.php?fil...421915726224970

Unsuppress edit (original messy way, but maybe more "MSI" Compatible, or at least more compatible with this MSI BIOS)

Before >>
Suppress If {0A 82}
True {46 02} << Edit 46 >> 47
Gray Out If {19 82}
QuestionId: 0x115D equals value 0x1 {12 06 5D 11 01 00} << Edit 01 >> FF

After edit becomes >>
Suppress If {0A 82}
False {47 02}
Gray Out If {19 82}
QuestionId: 0x115D equals value 0xFF {12 06 5D 11 FF 00}

I can access at BIOS but at oc section the bios freeze. This night I send other bios and setup data and setup data amitse modded and original, ok?

Please see my edit above If BOTH freeze once you enter OC section, then let me know and I will add AMITSE/SetupData edit on top of both, so you can then test both again
No, I don't need you to send me anything, I have all I need. Lets just test this out how I'm outlining, then once all OK, if you still need more info on which edits work and how they were done I will explain more.
I'm making both of those BIOS now, will edit in here, but test both BIOS above before testing these (once link added)

* Edit - Here is both of above Setup PE32 edited BIOS + AMITSE/SetupData edit on top of each, test both, one should work if both above freeze at OC section.
If 2nd BIOS above works and no freeze in OC Section, but you can't see the setting still, then only test #2 from this package.
If #2 above freeze same way when you enter OC, then both of these will need to be tested, to see which edit method was the issue (if either), both may be OK and just needed setup + AMITSE/SetupData edit at same time or freeze
http://s000.tinyupload.com/index.php?fil...829635465076204

Bios test 2 work and you can see the test item 5713648 in the pciture.
I compared the 2 modules you modified and original, to get the item setting, I saw that you modified the part in setupdata in a different way, right?
compared to the previous changes you made

Which BIOS exactly is the one that worked, from post #39?
This way I can tell you which setup PE32 unsuppression method works for this model. Please test both BIOS at #29 if you have not already, this way we know for sure if only one way to unsuppress works here, or either ways

I edited AMITSE/SetupData in same exact way always, one byte change below/15 bytes after BA 0E) as I explained that edit to you earlier.
You edited it wrong in your own edit, which I mentioned at post #37 when you sent me file to check, you edited correct way, but wrong setting changed

Is the bios test 2 then work fine and I can use that option in oc section bios.

I state that the item option if it is disabled does not start the computer anymore, so I think I will delete it, my interest now falls on three options that could help for overclocking, I leave you 3 images of the options, I understand more o minus how to modify even if i don't understand the logic of looking for values in amitse / setupdata.

Before I do anymore edits, or tell you anymore info on edits for this. Please test both BIOS at post #39, do both work OK, or only #2
Ideally, I'd like to know the test result from each BIOS at #37 as well, otherwise not ideal to move foward until proper answers on all these BIOS are known.
This way I know what does work for this BIOS, and what does not.

I don't understand your last comment, not enough details on what you're talking about (on option disabled and computer not starting I mean)?

-------------------------------------------

Here, I will try to explain again with new info/image for you about AMITSE/SerupData edit, you use "QuestionID" backwards (little endian), to find area to edit, then 15 bytes later is access Level bytes.
But, sometimes there is 3-12+ instances, so you have to locate the correct one. To know what that is, in the long string for setting, after 05 D1 for example, next four bytes are Label ID and Help Label ID, these two sets of bytes will always be after/near the correct location of the QuestionID you find to edit.

Here is example image and setting from IFR Info to show AMITSE/SetupData edit for Access Level and Fail Safe / Optimal
This is same AMITSE/SetupData module opened side by side, so I could show example of each edit item more clearly at same time.


Test Item 5713648, VarStoreInfo (VarOffset/VarName): 0x9AD, VarStore: 0x1, QuestionId: 0xEBA, Size: 1, Min: 0x0, Max 0x2, Step: 0x0 {05 91 7B 04 7C 04 BA 0E 01 00 AD 09 10 10 00 02 00}
QuestionID >> Little Endian (backwards) = BA 0E << Use to locate edit area, you must also find both labels mentioned below near it, so you know you are in correct location
Label ID >> 7B 04
Help Label ID >> 7C 04
15th Byte after QuestionID = Access Level
52nd Byte after QuestionID = Fail Safe + Optimized values

Access Level values >>
Show Yes/No -
DEFAULT = 00/No - 01/Yes (08/No - 09/Yes)
USER= 04/No - 05/Yes (or 0C/No - 0D/Yes)
Supervisor= 06/No - 07/Yes (Or 0E/No - 0F/Yes) Default = 29 (Yes) / 28 (NO) / User = 2D (Yes) / 2C (NO) / Super/Admin = 2F (Yes) / 2E (NO)

Bios number 2 work fine, bios number 1 freeze at oc section bios entering.
In the post 37 the last modified same always problem, the bios freeze at oc opening and need to restart with button.
Watching the worked bios and in this case is bios test #2 the modified is same to last part of post #37.
Sorry if you canìt understand my bad English and for my difficulties to understand what you tell me but not because you speak bad but my English is poor
------------------------------------

Thanks man you are great